Tender For Mtps I Ca Cws I Overhauling Of Sludge Disposal Pump And Cold And Hot Water Tunnel Vent Valves Air Vent Valves And Gate Valves Including Painting Of Ct Safety Grills Inside The Fan Stack Area Etc
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Oct 2026
13 days left
EMD
8100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mtps I Ca Cws I Overhauling Of Sludge Disposal Pump And Cold And Hot Water Tunnel Vent Valves Air Vent Valves And Gate Valves Including Painting Of Ct Safety Grills Inside The Fan Stack Area Etc
BOQ
| Sl. No. | Item Description |
| 1 | Charges for overhauling of Sludge disposal pump includes dismantling of pump components, cleaning, inspection and renewal of worn-out parts and reassembling. |
| 2 | Complete alignment & checking the operation of clarifier sludge disposal pump motor, sludge disposal pump and its suction & delivery pipe lines and its 150 mm gate valves. |
| 3 | Charges for Overhauling of 150 / 200 mm size 100 / 125 Class Gate valves of cold & Hot water Tunnel Vent in Cooling Water system I including dismantling of vent pipe , complete dismantling the valve, Lapping the valve disc & seat area renewal of spares, Gland Packing and rubber gasket and assembling. |
| 4 | Charges for cleaning the algae and other foreign materials on the outer surface and painting with two coats Of Enamel Yellow / black paint on handrails and Epoxy smoke grey paint on CT ID Fan blades, gear boxes, G.B. foundation. |
| 5 | Charges for removing the rust and old paint on the outer surface of the sun shield roof structure, door and its supports in the Eastern side & portion of western side in Cooing Tower –II. |
| 6 | Charges for painting with one coat of rust convertor , one coat of epoxy red oxide primer and one coat of epoxy coal thar black paint one over the other with proper intervals on the safety grills inside the fan stack area, Gearbox oil level indicator pipe line(740M2) in Cooling tower –II and painting with one coat of rust convertor, one coat of epoxy red oxide primer and two coats of epoxy high build Coal thar Black Paint one over the other with proper interval on the sun shield roof structure, door and its supports in the Eastern side(161M2) & western side(503M2) in cooling tower-II . |
| 7 | Charges for draining the oil in 1 No. CT ID Fan gear box, to remove the gear box oil level indicator pipe line from the gear box, cleaning the pipe line and releasing/removing the choke in the pipe using Air/ Water and re fixing the same in the gear box, and topping up of drained / new oil in the gearbox, if any pipe fittings like TEE, Union, Elbow, Bend is damaged it has to be replaced which are under contractor scope. |
| 8 | Charges for cutting and removal of existing deteriorated bolts of scrappers, removing damaged scrapers, cutting of scrapper rubber to required dimension from old Conveyor Belt, marking and making holes on scrapper rubber and fixing with new G.I Bolts and nuts in the traction & Flocculator drive in Clarifier II. |
| 9 | Hire charges for heavy machineries (Poclain cum Bull dozer) to clean the bushes, accumulated dry leaves, tree branches & other cleanable things in and around the clarifier I & II area, cooling tower I & II area & other mentioned area as directed by site in charge and moving the cleaned bushes, dry leaves, tree branches & others in to an open area. |
| 10 | Cost of Neoprene Rubber(Black) Gasket , Size,1M X 2 M X5 MM thick For Sl.No.3. |
| 11 | Cost of Black Enamel for Sl.No.4. |
| 12 | Cost of Yellow Enamel for Sl.No.4. |
| 13 | Cost of Rust Convertor for Sl.No.6. |
| 14 | Cost of Epoxy red oxide Primer for Sl.No.6. |
| 15 | Cost of Coal Thar Black Paint for Sl.No.6 |
| 16 | Cost of Epoxy Thinner for Sl.No.6 |
| 17 | Cost of Epoxy Smoke Grey paint for Sl.No.4 |
| 18 | Cost of GI M12x70mm full thread bolt with nut and 2washers for Sl.No.8 |
| 19 | Cost of Consumable and T&P For Sl.No.1 to 8 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender