Tender for Various Work Of Joinery And Workstation In Room No. 8 And 4 Internal Audit Section At A-Block, Pwd Campus, Jaipur

Sharing tender

Tender for Various Work Of Joinery And Workstation In Room No. 8 And 4 Internal Audit Section At A-Block, Pwd Campus, Jaipur-Providing & Fixing of ward robeshutters made out of 19mm thickBWP block board ISI of superiorquality make with following details :-Front side finishing with 1mm thicksuperior quality mica approved makeand 0.8mm thick approved shademica in the inner side. Covering withteak wood beading 25x12mm all thesides of shutter & 35x12mm on outerframe for making good the wall jointincluding heavy brass S.S. fittings(Handle 200mm 2 Nos., Tower Bolt150mm 2 Nos., Brass Lock 1 Nos.,Magnetic Catcher 2 Nos., BrassHinges 75x40x2.5 mm 6 Nos., SSHanger Rod 20mm dia) complete asper drawing and design approved b For shutters builtup standard tubularsections of openable doors, windows& ventilators including providing &fixing hinges/ rollers etc. and makingprovision for fixing of fittings whereverrequired (lockes shall be paid forseparately).Powder coating aluminum(minimum thickness of powder coating50 micron)Providing and fixing aluminum workfor doors ,windows, ventilators andpartition with extruded built upstandard tubular / appropriate Zsections and other sections ofapproved make conforming to IS :733and IS :1285, fixed with rawl plugsand screws or with fixing clips ,or withexpansion hold fasteners includingnecessary filling up of gap. atjunctions , at top ,bottom and sideswith required PVC/neoprene felt etc.Aluminium section shall be smooth,rust free, straight ,mitered and jointedmechanically wherever requiredincluding cleat angle Aluminium snapbeading for glazing /paneling , C.P.brass/ stainless steel screws Al.Tower bolt & Al. handle & Al. Aldropetc.,all complete as per architecturaldrawings and the directions ofEngineer- in – charge .(Glazing andpaneling to be paid for separately).Powder coating aluminum ( minimumthickness of powder coating 50Providing and fixing 12 mm thickprelaminated three layer mediumdensity (exterior grade ) particle boardGrade I, Type II conforming to IS :12823 bonded formaldehyde syntheticresin ,of approved brand andmanufacture in paneling fixed inaluminium doors ,windows shuttersand partition frames with C.P. brass /stainless steel screws etc. completeas per architectural drawings anddirection of engineer-in-charge. Prelaminated particle board withdecorative lamination on one sideand balancing lamination on otherProviding and fixing expanded grillmade of aluminum as per design anddrawing having members section ofsize 7.5mm x 6.0mm and opening ofsize 102mm x 99mm to aluminumwindow/vent with required screws, Yand H aluminium section (as perdrawing) at the ends and middle jointsrespectively complete in all respect asper direction of engineer in chargePowder coating aluminum ( minimumthickness of powder coating 50micronSupplying and fixing Rollor Blinds ofgood quality and approved makemade out of Imported fabric includingRoller Mechanism and lock with chainsystem with all necessary hooks etc.complete as per direction and sampleapproved by engineer-in-chargeProviding & Fixing BWR ISI marked19 mm board of approved make formaking wardrobe/shelves and otherfurniture with fevicol & nails completeas per approved by engineer incharge.Providing & Fixing mica of approvedmake for inner/outer side of shutterswith fevicol & nails complete as perapproved by engineer in charge. 0.6mm thick mica