Tender For Emergent Creation Of Aluminium Partition Wall At Visitors Room At District Magistrate Office, Howrah Along With Repairing Works At Several Location With Some Other Ancillary Works At 3Rd Floor And 2Nd Floor Of New Collectorate Building, Ho
Tender Value
4.99 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
2 days left
EMD
9995
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emergent Creation Of Aluminium Partition Wall At Visitors Room At District Magistrate Office, Howrah Along With Repairing Works At Several Location With Some Other Ancillary Works At 3Rd Floor And 2Nd Floor Of New Collectorate Building, Howrah During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | 13.88Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc.complete |
| 2 | 15.56Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead. |
| 3 | 13.215 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.11:4 (1 cement: 4 fine sand) |
| 4 | 13.80Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 5 | 13.85Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content. 13.85.3With water thinnable cement primer on wall surface havingVOC content less than 50 grams/litre |
| 6 | 13.83 Wall painting with premium acrylic emulsion paint of interior grade, havingVOC (Volatile Organic Compound ) content less than 50 grams/ litre ofapproved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.83.2 Two coats |
| 7 | 21.1Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sideswith required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : 21.1.1For fixed portion 21.1.1.3Polyester powder coated aluminium (minimumthickness of polyester powder coating 50micron) |
| 8 | 21.3Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): 21.3.2With float glass panes of 5 mm thickness (weight not lessthan 12.50 kg/sqm) |
| 9 | 9.83Providing and fixing aluminium die cast body tubular type universalhydraulic door closer (having brand logo with ISI, IS : 3564, embossedon the body, door weight upto 35 kg and door width upto 700 mm), withnecessary accessories and screws etc. complete. |
| 10 | 9.100Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : 9.100.1 125 mm |
| 11 | 9.97Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete : 9.97.1300x10 mm |
| 12 | 26.45Supplying and installation of moisture resistant/fire resistant cement boardas per standard sizes fixed with self-drilling / taping screws. Screws shallbe of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge oflength varying from 25 to 45 mm. 26.45.1Cement Fiber Board 6 mm thick as per IS 14862:2000 oftype B (High pressure Steam Cured) |
| 13 | 9.7Providing and fixing panelling or panelling and glazing in panelled orpanelled and glazed shutters for doors, windows and clerestory windows(Area of opening for panel inserts excluding portion inside grooves orrebates to be measured). Panelling for panelled or panelled and glazedshutters 25 mm to 40 mm thick. 9.7.3Ply wood 5 ply, 9 mm thick 9.7.3.2Decorative plywood one side decorativeveneer and commercial veneer on other face(Type 1) conforming to IS 1328 BWR Type |
| 14 | 13.50Applying priming coat: 13.50.2With ready mixed aluminium primer of approved brand andmanufacture on resinous wood and plywood |
| 15 | 13.97Painting with oil type wood preservative of approved brand and manufacture: 13.97.1Old work (one or more coats) |
| 16 | 8.32Designing, fabricating, testing, installing and fixing in position CurtainWall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings forpressure equalisation or rain screen principle as required, proper drainageof water to make it watertight including checking of all the structural andfunctional design. (b) Providing, fabricating and supplying and fixing panels of aluminiumcomposite panel cladding in pan shape in metalic colour of approvedshades made out of 4 mm thick aluminium composite panel materialconsisting of 3 mm thick FR grade mineral core sandwiched betweentwo Aluminium sheets (each 0.5 mm thick). The aluminium compositepanel cladding sheet shall be coil coated, with Kynar 500 based PVDF /Lumiflon based fluoropolymer resin coating of approved colour and shadeon face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather siliconesealant, backer rods etc. |
| 17 | Using correction factor on DSR-2023 on account of GST @ 0.973 |
| 18 | Cost Index @ 23.00% on DPAR'2023 items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender