Tender For Special Repair Of Otm Accn Bldg No T-211, T-236, T-238, T-240, T-345, T-225-227(Bcd), T-234-235(Bcd), T-236-238(Bcd) And T239-240(Bcd) Xxxxx At Zakhama Mil Stn.
Tender Value
72.34 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
26 days left
EMD
1.33 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
zakhama → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Otm Accn Bldg No T-211, T-236, T-238, T-240, T-345, T-225-227(Bcd), T-234-235(Bcd), T-236-238(Bcd) And T239-240(Bcd) Xxxxx At Zakhama Mil Stn.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed at site. |
| 2 | Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed at site. |
| 3 | Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premisescomplete all as specified and as directed at site. |
| 4 | M& L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in Cement mortar (1:6) , complete all as specified and as directed at site. |
| 5 | M&L for cloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in CM(1:4), complete all as specified and as directed at site. |
| 6 | Demolition of Plain Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) ,complete all as specified and as directed at site. |
| 7 | M&L Sand filling under floors or in foundations including watering and consolidation in layers n exc 25mm thick as in sand cusion below paver blockcomplete all as specified and as directed at site. |
| 8 | Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as specified and as directed at site. |
| 9 | M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in sub base, complete all as specified and as directed at site. |
| 10 | M&L factory made Chequered cement concrete tiles 250mmx250mmx25mm thick over 15mm thick screed bedding layer of mortar in CM(1:4) for laying floor finishes set jointed with grey cement and pigment and pointed in neat cement slurry in floors, complete all as specified and as directed at site. |
| 11 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering, complete all as specified and as directed at site. |
| 12 | M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensil strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping ,complete all as specified and as directed at site. |
| 13 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/valley gutterl, fixed with self tapping screws , complete all as specified and as directed at site. |
| 14 | S&F 0.63mm thick plain galvanised, mild steel sheeting, in stepped flashing/wall (measured as the minimum rectangle from which the pieces can be cut) etc and fixed with nail ,complete all as specified and as directed at site. |
| 15 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets,complete all as specified and as directed at site. |
| 16 | Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position,complete all as specified and as directed at site. |
| 17 | M&L for Timber framed and fixed clean sawn 2nd class hard-wood in scantling fixed, complete all as specified and as directed at site. |
| 18 | M&L for 4mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work fixed with screws to timber frame work ,complete all as specified and as directed at site. |
| 19 | Supply and fix 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to GI snap grid frame work(size of 605x605mm) for false ceiling including suspenders/hangers 6mm dia GI wire(upto 1200mm length) adjusting level fixed to roof shads by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansio hold fasteners 12.5mm dia 40mm long complete all as specified as per manufacturers instruction,complete all as specified and as directed at site. |
| 20 | Dismantling boarding, any description, fixed in any position with nails,complete all as specified and as directed at site. |
| 21 | Supply and fix weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed in 2nd class hardwood,complete all as specified and as directed at site. |
| 22 | S&F in repair Rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated of Fe 410W) (Gde E-250 quality `B`),complete all as specified and as directed at site. |
| 23 | S&F in repair Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 W (Gde E-250 quality `B`),complete all as specified and as directed at site. |
| 24 | Taking down plastering in cement lime or cement mortar ,complete all as specified and as directed at site. |
| 25 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC as per manufacturers instruction shall be used and finishing even and smooth without using extra cement,complete all as specified and as directed at site. |
| 26 | M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1 : 6 and finishing even and smooth without using extra cement,complete all as specified and as directed at site. |
| 27 | Supply only water proofing compound ISI Marked. |
| 28 | M& L for Preparation of new plaster surface of walls and applying two coats of oil bound distemper over a coat of priming surface chalk whitening |
| 29 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over one coat of primer complete all as specified and as directed at site. |
| 30 | M&L including preparation and treating two coats of synthetic enamel paint over a coat of pink primer to new wood and wooden surface exceeding 10cm width or girth,complete all as specified and as directed at site. |
| 31 | M&L including preparation and treating one coat of synthetic enamel paint on old painted wood and wooden surface exceeding 10cm width or girth,complete all as specified and as directed at site. |
| 32 | M&L for preparation of new or previously untreated steels surface painted of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint (ordinary tint) over a coat of red oxide complete all as specified and as directed at site. |
| 33 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed at site. |
| 34 | Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection and forming grooves at 3.00 m distance and filled with bituminous compound mixed with fine sand in the proportion of 1:3 finished the surface fair and even complete all as specified and as directed at site. |
| 35 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane,complete all as specified and as directed at site. |
| 36 | Taking down Shutters of any description n.exc 1 sqm each,complete all as specified and as directed at site. |
| 37 | Taking down Shutters of any description exc 1 sqm but n exc 2 sqm each,complete all as specified and as directed at site. |
| 38 | S&F Factory made flush door shutter 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed at site. |
| 39 | S &F Factory made 2nd class hardwood 30mm thick glazed and skeleton window/door shutter any numbers but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, with plain, chamfered or rounded mitred and framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (b),complete all as specified and as directed at site. |
| 40 | Supply and fixing in repair mild steel galvanized iron wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 and fixed with tinned tacks or staples complete all as specified and as directed at site. |
| 41 | Taking down chowkhat with shutter n.exc. 1.50 Sqm each (without taking off shutter from the frames.) complete all as specified and as directed at site. |
| 42 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per spec & drawing complete all as specified and as directed at site. |
| 43 | Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per spec & drawing complete all as specified and as directed at site. |
| 44 | S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed 100mm size, complete all as specified and as directed at site. |
| 45 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and as directed at site. |
| 46 | S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long, complete all as specified and as directed at site. |
| 47 | Supply and fixing as in replacement 19/20mm dia mild steel chromium plated curtain rods with and including fixing socket complete all as specified and as directed. |
| 48 | S&F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed at site. |
| 49 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe),complete all as specified and as directed at site. |
| 50 | S&F in repair PVC valveless, syphonic action type, flushing cistern 10 ltr , low level, white, with inlet, ball valve, float and handle including brackets,complete all as specified and as directed at site. |
| 51 | Supply & fix in repair vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT complete all as specified and as directed at site. |
| 52 | S&F in repair bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed down for iron pipe 15 mm bore complete all as specified and as directed at site. |
| 53 | Supply and fix in repair 15 mm dia stop cock fancy type, chromium plated each with long screwed shank and cup washer, complete all as specified and as directed at site. |
| 54 | Supply and fix in repair Vitreous china Urinal bowl type flat back , size 465 X 355 X 265mm white with grating and union for discharge pipe including providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60 mm long brass screws , pointing around urinal back in cement complete all as specified and as directed at site. |
| 55 | Supply and fix in repair 600 X 450 mm bevelled edge mirror of selected quality glass , mounted on 6 mm thick AC building board or exterior grade plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed at site. |
| 56 | Supply and fix in repair15 mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and as directed. |
| 57 | Supply and fix in repair 20 mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etccomplete all as specified and as directed at site. |
| 58 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc.etc complete all as specified and directed at site. |
| 59 | Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LS) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LS) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed at site.Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. |
| 60 | All as per item No above but for 3 pin,5/6 Amp switch Socket combination on independent board with 2.5 sqmm copper wiecomplete all as specified and directed at site |
| 61 | All as per item No above but for 15/16 Amp switch Socket combination on independent board with 2.5 sqmm copper wier complete all as specified and directed at site. |
| 62 | Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal controlled by one switch complete all as specified & as directed at site. |
| 63 | Supply & fixing Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal controlled by one switch complete all as specified and as directed at site. |
| 64 | S&F in repair LED Light Fitting 1x20 W, 220v, with necessary fitting and fixtures including LED tube Light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose , complete all as specified and directed at site. |
| 65 | S&F in repair light fitting 1x9 W/ 1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size , complete all as specified and directed at site. |
| 66 | Supply & Fixing exhaust fan made of sturdy engineering plastic 300mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with 3 core flexible copper cable including making holes on the wall and making good to the disturbed surfaces including taking down and removing old UNSV fan and depositing to MES store yard complete all as specified and as directed at site. |
| 67 | S&F paino flush button single pole one way 5 amp, complete all as specified and directed at site. |
| 68 | Supply and fixing ceiling rose, 3 terminal PVC/polycarbonate, isolated body surface bakelite, including PVC box type, 62.5mm x 50mm, ISI marked three terminals complete all as specified & directed at site. |
| 69 | Supply and fixing in repairs of MCB DB SPN 8 ways, powder coated, double door, 240 Volts, including bus bar neutral link, earth bar and din rail, for fixing MCB of various rating complete all as specified and as directed at site. |
| 70 | Supply and fixing in repairs of MCB DB SPN 6 ways, powder coated, double door, 240 Volts, including bus bar neutral link, earth bar and din rail, for fixing MCB of various rating complete all as specified and as directed at site. |
| 71 | Supply & Fixing in repair of MCB DB of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and as directed at site.Note : MCB and MCB DB shall be of same make as approved by AGE (I). |
| 72 | Supply & Fixing in repair of MCB DB of capacity 6-32 Amps, 240 V, 10 KA 'C' curvecomplete all as specified and as directed at site.Note : MCB and MCB DB shall be of same make as approved by AGE (I). |
| 73 | Supply & Fixing Energy efficient, BEE 5 Star rated Storage type Water Heater [Geyser] 25 Litres Capacity with 2000 Watt Capacity heating element, 230 Volts, 50 Hz, Single phase AC, Conforming to IS - 2082, Vertical Storage type with Stainless Steel Inner Tank and ABS Outer Shell complete fixed to wall with suitable expansion fasteners including 02 Nos. of 450 mm long x 15mm dia Stainless Steel braided Flexible Hot & Cold Water connections and 15mm bore Non-Return Valve and Deposited to MES store yard,complete all as specified and as directed at site. |
| 74 | S & F in repair SP & N Enclosure with 2 Pin and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, 240 Voltscomplete all as specified and as directed at site. |
| 75 | Material and Labour for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Medium grade, two nos. 90 degree bends, M.S. hook and stay or guy including dismantling of existing old unserviceable house service brackets, any type complete all as specified and as directed at site. |
| 76 | M&L for sub main wiring with 2 run of 6 sqmm, single core, FRLSH PVC insulated & unsheathed cable confirming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metalic PVC grey conduct with all accessories such as Tees, Elbow, junction box, reducers atc as required alongwith one run of 6 Sqmm single core FRLSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board/ distribution board of each building/ qtr as ordered and testing on completion including taking down old submain wiring and type of conduit cpmplete all as soecified and direted at site. |
| 77 | S&F 1100 Volts havy duty flat cable of size 16 Sqmm 2 core , PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including replacing 4mm suspension wire including taking down old cable of any description complete all as specified and directed at site. |
| 78 | S&F 1100 Volts havy duty flat cable of size 10 Sqmm 2 core , PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including replacing 4mm suspension wire including taking down old cable of any description complete all as specified and directed at site. |
| 79 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all complete all as specified and as directed at site.Notes:-(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender