Tender For Repair To Certain Misc Works In Zone A Under Age B/R-Iii At Mil Stn Gandhidham Under Ge (A) Bhuj.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
19 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Certain Misc Works In Zone A Under Age B/R-Iii At Mil Stn Gandhidham Under Ge (A) Bhuj.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of fencing, wire mesh of any description and in any position complete all as specified and directed. |
| 2 | Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion and making good disturbed ground (post embedded in PCC) complete all as specified and directed. |
| 3 | Excavation in post hole for similar holes each n exc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 4 | M & L for cement concrete 1:3:6 type C2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified and directed. |
| 5 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 6 | S&F screw bolts (machine made) with hexagonal or square head at one head and rounded the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm nexc 15cm long dia of shank 11 to 15mm complete all as specified and directed. |
| 7 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 8 | Supply only chainlink fencing any size any type etc complete all as specified and directed. |
| 9 | Supply only mild steel round bars of 10 mm dia as in line wire cut lengths, Hooking ends etc conforming to Fe- 410 - W (Gde E-250) quality A (For tying chain link fencing complete all as specified and directed |
| 10 | M&L for preparation of new untreated steel and iron surfaces of any description, not exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red complete all as specified and directed. |
| 11 | M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping, benching, holdfast, fixing of fencing post above wall etc,finished even and smooth using extra cement incl necessary form work complete all as specified and directed. |
| 12 | M&L for Providing precast ce- ment concrete type B1 1:2:4(20mm graded aggregate) set in cement mortar 1:4 in columns, posts, boundary pillars, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed. |
| 13 | S & F galvanised two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts incl securing or laying at crossing with and provision of mild steel wire staples or steel pins etc complete all as specified & as directed. |
| 14 | M & L for preparation of new steel surfaces exc 10cm width or girth and apply one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed. |
| 15 | Demolition of brick work or stone masonry built in cement mortar including all quoins & jambs etc complete all as specified & as directed. |
| 16 | M&L plain cement concrete 1:4:8, Type D-2 (using 40mm graded aggregates) as in foundations, filling and mass concrete etc complete all as specified & as directed. |
| 17 | M&L brickwork with fly ash/AAC bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:4 by using old size bricks complete all as specified & as directed. |
| 18 | M&L half brick thick brick work with sub class \\"B\\" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified & as directed. |
| 19 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed. |
| 20 | M&L rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces mixed with water proofing compound incl chajja, facia etc, finished the surfaces even and smooth without using extra cement mixed with water proofing compound complete all as specified & as directed. ( WPC measured separately) |
| 21 | M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 1:2:4 using 12.5mm aggregate set in cement mortar 1:4, including all mouldings(Post shall be measured separately) complete all as specified and directed. |
| 22 | M&L for applying two coats of cement base paint on new/old surfaces of wall over a coat of primer complete all as specified and as directed. |
| 23 | S & F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws complete all as specified and directed. (Note : Corrugation colour and shape of sheet shall be approved by GE) |
| 24 | Demolition of cement concrete of any description and in any position not otherwise complete all as specified & as directed. |
| 25 | M&L for 100 mm thick PCC(1:4:8) type D2 using 40mm graded stone agg as in sub base finished even and rough complete all as specified and directed. |
| 26 | M & L for 75mm thick cement concrete 1:2:4 type B1 using 20mm stone aggregates as in flooring complete all as specified and directed. |
| 27 | M & L for Forming dummy/contraction joint with an initial saw cut of 3 mm soon after the concrete has set, upto a depth of 1/3rd to 1 /4th the thickness of the slab widening the first saw cut to 6 mm and 24 mm deep by using diamond bit cutter of appropriate size straight and smooth edges Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant. Placing of closed cell, medium density, crossed linked polyethylene foam backup rod of 8 mm dia application of bond breaker tape on top of back up rod for complete width of the joint and filled with polyurethane based sealant complying with BS-5212 , BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) OF +/- 30% having minimum 10 year performance guarantee applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacturer complete as specified and directedcomplete all as specified and directed. |
| 28 | M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified & as directed. |
| 29 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified & as directed. |
| 30 | M&L for glossy finish Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment and , set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6 complete all as specified & as directed. |
| 31 | M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved by GE. |
| 32 | S&F rolled section as in roof trusses, main and cross beams, hip and jack rafters, purlins,gate where connected to common rafters,GUSSET PLATE and like confirming to grade FE-410-W Gde-E-250 quality A complete all as specified & as directed. |
| 33 | S&F pre-painted galvalume/plain aluminium zinc coating corrugated steel sheet 0.45mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roofing, self drilling and self tapping screws of suitable size including neoprene and EPDM washers complete all as specified & as directed. |
| 34 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New surfaces complete all as specified & as directed. |
| 35 | Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over olds urfaces complete all as specified & as directed. |
| 36 | Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as specified & as directed. |
| 37 | M & L for 18-20 mm thick granite ( Red) work (table rubbed and polished) in steps, Jambs, pillars, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including screed bed 15 mm thick CM (1:3) complete all as specified & as directed. |
| 38 | NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender