Tender For Providing Of Boundary Wall Of Fafa Accn At Bs Marg Under Ge (East) Lucknow
Tender Value
37.97 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
19 days left
EMD
75940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Boundary Wall Of Fafa Accn At Bs Marg Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | M&L for RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed. |
| 3 | M&L for RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed. |
| 4 | M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. |
| 5 | M&L for RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed. |
| 6 | Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and as directed. |
| 7 | Use and waste of form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed. |
| 8 | Use and waste of form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat complete all as specified and as directed. |
| 9 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.Note : TMT bars shall be procured directly form main producers only. |
| 10 | All as per item No 9 above but 6mm to 8mm dia |
| 11 | M&L for precast cement concrete block masonary type C-1 , using crushed stone 20mm graded aggregate ,set and jointed in cement martar 1:6 complete all as specified and as directed. |
| 12 | M&L for 25mm thick pre-formed filler for expansion joints complete all as specified and as directed. |
| 13 | M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 200 ml per 50 Kg bag cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. Note : - Cost of WPC shall be deemed inclusive in quoted unit rate. |
| 14 | Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and directed. |
| 15 | Removing excavated material (soils) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed. |
| 16 | M & L for preparing and applying two coats of cement base paint over a coat of alkali resistant primer on newly plasterd surface of wall complete all as specified and directed. |
| 17 | S&F for Concertina Coil Punched type 600mm dia , Central core wire - made from high tensile , spring steel - high carbon wire conforming to IS 4454/Part-/Garde-Sm duly hot dipped galvanized with diameter staring from 2.50mm, UTS 1670N/mm2, heavy zinc coating with minimum 230gms per srm. Razor punched tape - galvanized steel strip As per IS 513/D.D Grade/2004, with concertina clips heavy duty J clipsto be used for making concertina coilswhich is made from steel Fe410 complete all as specified and directed.Note : Each strech of concertina coil shall not be more than 5.50 RM in any case at site. |
| 18 | S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.Note : Each line shall be wire to be measured. |
| 19 | S&F mild steel angles/flat iron as in fencing post and struts including embeeded in concrete and screwing etc including securing bolts, cutting tops to shape as directed, drilling holes notching for wire, etc complete all as spficied Fe 290 Gde E-165, complete all as specified and directed. |
| 20 | M & L for preparation of new steel and iron based surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete, all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender