Tender For Special Repairs To Toilets In Otm Accn Bldg No. P-378 (Partly) At 16 Madras Under Ge Stm Chennai.
Tender Value
33.96 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
19 days left
EMD
67920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Toilets In Otm Accn Bldg No. P-378 (Partly) At 16 Madras Under Ge Stm Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTIONDemolition of (unreinforced) concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed. |
| 2 | Demolition of (unreinforced) Concrete in ground floor and paving n.exc 15 cm thickness, complete all as specified and as directed. |
| 3 | M & L for PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) over the roof slab for roof treatment, average thickness 25mm, finished even and fair without using extra cement complete all as specified and as directed. |
| 4 | M & L for 10mm thick rendering 10mm thick in CM (1:4) using water proofing compound on fair faces of brick/ concrete surfaces and finished the surfaces even and smooth without using extra cement, complete all as specified and as directed.Note:- Water proofing compound shall be measured and paid separately. |
| 5 | Supply only liqiuid water proofing compound all as specified and as directed. |
| 6 | M & L for applying evenly a tack coat of industrial bitumen 85/ 25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified and as directed. |
| 7 | M & L for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.80 Kg/ Sqm reinforced with non woven polyester matt black finished over compatiable primer at 0.3 litre/ Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufacturer's instructions. The overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage.Manufactures:- IWL India Ltd/ SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/ STP.Note:- The work shall be carried out be authorised applicators of manufactures. |
| 8 | M & L for PCC (1:5:10) (type E-2) as in foundations, filling and mass concrete (using 40mm graded aggregate) complete all as specified and as directed. |
| 9 | Supplying and laying of 40mm outer dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 11 | M & L for 25mm thick PCC (1:2:4) type B-1, (using 20mm graded aggregate), as leveling /sub base for laying tiles as in floors, complete all as specified and as directed. |
| 12 | M & L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 13 | M & L for coloured glazed ceramic tiles as in vertical surface 350 x 250 x 7 mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over 10mm thick rendering in cement mortar 1:4,complete all as specified and as directed. |
| 14 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm complete all as specified and as directed. |
| 15 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and as directed. |
| 16 | S & F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and as directed by Engr-in-Charge. |
| 17 | S & F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk /wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as directed by Engr-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door /window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 18 | S & Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete as directed by Engr-in-Charge.Note:- Stainless Steel butt hinges and necessary SS screws shall be paid separately. |
| 19 | S & F for 100mm butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and as directed. |
| 20 | S & F for 150mm aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed. |
| 21 | S & F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed. |
| 22 | S & F for 125mm in size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed. |
| 23 | Taking up or down 25mm dia bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 24 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laid in floors complete all as specified and as directed. |
| 25 | Supply, fixing and laying 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA), complete all as specified and as directed. |
| 26 | Supply, fixing and laying 25mm outer dia brass Tee/ brass reducer Tee 25 x 20mm complete all as specified and as directed. |
| 27 | Taking up or down 15mm dia bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 28 | Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laid in floors complete all as specified and as directed. |
| 29 | S & F of CPVC brass Tee for 20 mm outer dia pipe, complete all as specified and as directed. |
| 30 | S & F of CPVC brass elbow for 20 mm outer dia pipe, complete all as specified and as directed. |
| 31 | Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10cm girth, complete all as specified and as directed. |
| 32 | S & F in repairs counter wash hand basin, white (with collar) oval ceramic glossy finish, size 22\\" x 16\\" x 8\\", complete all as specified and as directed. |
| 33 | S & F in repairs Vitreous China wash down water closet pan (wall mounted), including inbuilt flushing cistern, seat cover white (including fixing bolts, flushing cistern, flush pipe and seat cover), complete including all fittings, complete all as specified and as directed. |
| 34 | S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and as directed. |
| 35 | S & F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, complete all as specified and as directed. |
| 36 | S & F in repairs 15mm bore pillar taps, swan neck with flange, cast copper alloy chromium plated, fancy type, screwed down screwed for iron pipe, complete all as specified and as directed. |
| 37 | S & F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 38 | S & F in repairs bathroom PVC cabinet mirror of size 350 x 450mm, complete all as specified and as directed. |
| 39 | S & F in reapirs tubular towel rail brass cromium plated, 20mm dia, D type, 60cm long between flanges including screws for fixing, complete all as specified and as directed. |
| 40 | S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 41 | S & F in repairs bib taps, cast copper alloy chromium plated fancy type, crewed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 42 | S & F in repairs for 15mm dia bore angle stop valve/ stop valves, cast copper alloy chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 43 | S & F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and as directed. |
| 44 | S & F PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed. |
| 45 | S & F for grating doom 100mm dia of PTMT (Minimum weight 25gms, complete all as specified and as directed. |
| 46 | S & F in repairs Vitreous China KUF urinal with concealed, sensor, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), complete all as specified and as directed. |
| 47 | Cutting holes n.exc 150 Sqcm (Superficial area) into or through brick walls built in cement mortar, complete all as specified and as directed.. |
| 48 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 49 | M & L for RCC (nominal mix) type (B-1) (1:2:4) ( using 20mm graded crushed stone aggregate) as in slabs/ floor slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. |
| 50 | M & L for use and waste of timber as in form work (rough finished surfaces of concrete) to flat surfaces of soffits and sides of suspended shelves and similar work etc; complete all as specified and as directed. |
| 51 | M & L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 52 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 53 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed. |
| 54 | M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed. |
| 55 | M & L for brickwork with fly ash bricks (old size bricks) in cement mortar (1:6), straight or curved on plan exc 6 m mean radius, complete all as specified and as directed. |
| 56 | S & F for 4mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 57 | S & F for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 58 | S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 59 | M & L for rendering 10mm thick in CM (1:3) on fair faces of brick / concrete surfaces and finished the surfaces even and fair, complete all as specified and as directed. |
| 60 | M & L for preparation of old decorated surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bond distemper, complete all as specified and as directed. |
| 61 | M & L for preparation of old decorated surfaces of ceiling surfaces and applying two coats of oil bond distemper, complete all as specified and as directed. |
| 62 | M & L for preparation of old decorated surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of cement base paint, complete all as specified and as directed. |
| 63 | Taking down eaves gutters and rainwater pipes/ SWR pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 64 | S & F for 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints solvent cement, laid in trenches or in floors, complete all as specified and as directed. |
| 65 | S & F for 110mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints solvent cement, fixed on walls, complete all as specified and as directed. |
| 66 | S & F for 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints solvent cement, laid in trenches or in floors, complete all as specified and as directed. |
| 67 | S & F for 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed on walls, complete all as specified and as directed. |
| 68 | S & F for stack clamp 50mm by 5mm flat iron and 16mm dia round bar stays, including bolts snd nuts and securing ends of stsys to wall or roof for pipe 75/ 110mm, complete all as specified and as directed. |
| 69 | S & F for PVC (SWR) bends 110mm bore setting and jointing to solvent cement complete all as specified and as directed. |
| 70 | S & F for PVC (SWR) Tee equal or unequal for 110mm bore pipe with access door setting and jointed with solvent cement, complete all as specified and as directed. |
| 71 | S & F for PVC (SWR) vent cowl 110mm dia bore setting and jointed with solvent cement, complete all as specified and as directed. |
| 72 | S & F for PVC (SWR) Tee equal or unequal for 75mm bore pipe with access door setting and jointed with solvent cement, complete all as specified and as directed. |
| 73 | S & F PVC (SWR) 75mm dia bore floor trap with grating including jointing to solvent, complete all as specified and as directed. |
| 74 | S & F for PVC (SWR) bends 75mm bore setting and jointing to solvent cement complete all as specified and as directed. |
| 75 | S & F for PVC (SWR) vent cowl 75mm dia bore setting and jointed with solvent cement, complete all as specified and as directed. |
| 76 | S & F for PVC SWR gully trap 125/110 mm setting in cement mortar and jointing with solvent cement, complete all as specified and as directed. |
| 77 | S & F for 10mm thick toughned glass as in urinal partitions, automatic doors and similar work including cutting to shape, drilling holes required and fixing at site properly, complete all as specified and as directed. |
| 78 | S & F for 32mm dia bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms), complete all as specified and as directed. |
| 79 | S & F for stainless steel towel ring 300mm dia complete all as specified and as directed. |
| 80 | S & F for 40mm dia Low Density Poly Ethylene pipes (LDPE) of pressure rating 6 Kgf/ cm2 fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed. |
| 81 | M & L for 75mm thick PCC (1:3:6) type C- 2, (using 40mm graded stone aggregate), as in plinth protection laid in stretches not exc 3mtr each, complete all as specified and as directed. |
| 82 | Dismantling PVC water stroge tanks 1000 ltrs capacity and removing to store all as specified and as directed. |
| 83 | S & F rotational moulded polyethylene water storage tanks of capacity of 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed. |
| 84 | S & F in repairs CP brass peg set of 6 Nos pegs complete all as specified and as directed. |
| 85 | S & F PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium/ G.I./ M.S. as per specification and drawing, complete all as specified and directed. |
| 86 | S & F anodised aluminium snap grid frame work for false ceiling, main tee web 2533, flange 35mm thickness 0.7mm, cross tee web 2533, flange 35mm thickness 0.7mm, wall angle web and flange 25mm each, soffit cleat web 25 flange 37 thickness1.8mm, row plug and suspende form soffit with 3mm dia GI wire @1200mm C/C with cross tee and 600mm with main tee complete all as specified and as directed. |
| 87 | Excavating over areas, n.exc 1.5 m wide and n.exc 1.50 mtr in depth for foundation etc, for manhole/ soak pit getting out in hard/dense soil complete all as specified and directed. |
| 88 | Description all as per Item No 91.00 hereinabove but depth exc 1.50 m deep and n.exc 3.00m complete all as specified and directed. |
| 89 | Description all as per Item No 91.00 hereinabove but depth exc 3.00 m deep and n.exc 4.50m complete all as specified and directed. |
| 90 | Description all as per Item No 91.00 hereinabove but depth exc 4.50 m deep and n.exc 6.00m complete all as specified and directed. |
| 91 | M & L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 92 | M & L for brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in CM (1:4) complete all as specified and directed. |
| 93 | M & L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping complete all as specified and directed |
| 94 | M & L for precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in manhole cover slab, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM (1:4) including necessary form work complete all as specified and as directed |
| 95 | M & L for cement concrete (1:2:4) type B-0 (using12.5 mm graded stone aggregate) as in coping, benching in manhole including necessary form work complete all as specified and directed |
| 96 | M & L for rendering 15mm thick in CM (1:4) on concrete surfaces finished even and smooth without using extra cement on roof slab mixed with liquid water proofing liquid as per manufacturers instructions all as specified and as directed.(Note : Liquid Water proofing shall be measured and paid separately). |
| 97 | M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed. |
| 98 | M & L for preparing newly plastered wall surface and applying two coats of cement base paint over a coat of primer on wall complete all as specified and as directed. |
| 99 | M & L for 150mm dia reinforced concrete pipes NP2, laid and jointed complete with collars complete all as specified and directed. |
| 100 | M & L for concrete bed with cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 150mm bore complete all as specified and directed. |
| 101 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick of soils complete all as specified and as directed. |
| 102 | Removing excavated material (soil) to a distance n.exc 50mtr and depositing where directed complete all as specified and as directed. |
| 103 | M & L for broken stone or boulders loose filling with aggregate of gauge 80 to 150mm in sokage well complete all as specified and directed. |
| 104 | M & L for use and waste of timber as in form work to sofits and sides of suspended slab such as roof slab and floor n.exc 200mm thick complete all as specified and as directed. |
| 105 | S & F 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 106 | S & F 150mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 107 | Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed. |
| 108 | Demolition and breaking up drain pipes 100mm dia (salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and as directed. |
| 109 | Demolition and breaking up drain pipes 150mm dia (salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and as directed. |
| 110 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard and dense soil, complete all as specified and as directed. |
| 111 | M & L for 100mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed. |
| 112 | M & L for plain cement concrete (1:3:6) type C-2, (using 40mm graded stone aggregate) as in bed to drain pipes 100mm dia including packing under and completely surrounding pipes with concrete, complete all as specified and as directed. |
| 113 | M & L for 15mm thick rendering in cement mortar (1:4) and finishing the surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 114 | M & L for preparation of new plastered/ unplastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed. |
| 115 | E/M PORTIONTaking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 116 | M & L for wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductor conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall, making good disturbed surfaces of walls and fixed on ceiling etc with suitable clamps, screws, etc for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly for One light point/ Exhaust fan point controlled by one switch complete all as specified and as directed. |
| 117 | Description all as per Item No.116.00 herein before but wiith 4 Sqmm single core PVC cable for one 3 pin 15 Amps switch socket outlet on independent board complete all as specified and as directed. |
| 118 | Taking down sub main wiring (or) power wiring complete upto 2 runs of 4 Sqmm in PVC conduit or concealed removing to store or taken as credit and making good the disturbed surfaces of wall, etc complete all as specified and as directed. |
| 119 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 4 Sqmm including one run of 4 Sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25mm dia rigid PVC conduit and conduit accessories incl accessories fixed on concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly complete all as specified and as directed. |
| 120 | S & F in repairs ceiling rose surface bakelite 65mm x 50mm two to three terminals complete all as specified and as directed. |
| 121 | S & F in repairs modular switch flush DIRECT TO FIT press type 10 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 122 | S & F in repairs modular switch flush DIRECT TO FIT press type 16/20 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 123 | S & F in repairs modular socket flush DIRECT TO FIT press type 16/ 20 Amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 124 | S & F in repairs modular white cover with plate with frame 3 module including flush box matching with white cement work if necessary complete all as specified and as directed. |
| 125 | S & F in repairs modular white cover with plate with frame 8 module including flush box matching with white cement work if necessary complete all as specified and as directed. |
| 126 | S & F in repairs MCB distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 63 Amps rated busbar with neutral link, 8 ways SPN double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed. |
| 127 | S & F in repairs MCB SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series including taking down old one all as specified and as directed. |
| 128 | S & F in repairs MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series including taking down old one all as specified and as directed. |
| 129 | S & F LED T/L fitting 20 Watts tubelight single side connection with one No LED tube rod with PC body type 4 feet in replacement of tube light fitting, wall mounted LED batten, extructed aluminium heat sink provided for efficient heat dissipation & long lasting LED driver, 0.95 P.F, 240 volts, 6500K, 2000 lumens complete all as specified and as directed. |
| 130 | S & F wall / surface mounting LED fitting (mirror light) 2 feet, LED 10 watt , 240 Volts complete all as specified and as directed. |
| 131 | Taking down old exhaust fan and kept in MES store where as directed. |
| 132 | S & F in replacement of fresh air freshner fan made of plastic body of size 200mm complete all as specified and as directed. |
| 133 | S & F LED luminaire 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 134 | S & F Automatic hand dryer, Stainless steel wall mouted, fast dryer, energy-efficient & rust free proof for washroom complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender