Tender For Repair And Renovation Electrical Work At Block Livestock Development Center Cum Block Animal Health Centre Of Magrahat-I In The District Of South 24 Parganas.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Oct 2026
12 days left
EMD
20463
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas South → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Electrical Work At Block Livestock Development Center Cum Block Animal Health Centre Of Magrahat-I In The District Of South 24 Parganas.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.i) 415V, 160A Bus, 4 Way VTPN DB - 1 no.ii) I/C - 415V, 125A, 25kA/35kA FP MCCB (adjustable thermal and fixed magnetic setting) -1no.iii) O/G - 415V, 40A, 10kA TP MCB ('C' Curve) - 2 nos.iv) O/G - 415V, 63A, 10kA TP MCB ('C' Curve) - 2 nos.[Make - Legrand/Siemens/L&T/ABB][For new constructed OPD building & UPS] |
| 2 | Supplying and fixing 4way double door sheet steel (16SWG), powder coated cable end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment |
| 3 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachmenti) 4 way HTPN DB - 1 no.ii) I/C - 415V, 40A FP Isolator -1 no.iii) O/G - 240V, 16-32A SPMCB-12 nos.[Make - Legrand/Siemens/L&T/ABB][For power supply to SPN] |
| 4 | Supplying and fixing 6way double door sheet steel (16SWG), powder coated cable end box for TPN DB Horizontal enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment |
| 5 | S&F 250V, (6-10)A per way, SPN MCBDB way with SS enclosure double-door(Ivory White with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing,on the surface of the wall with fastners & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS.i) 2+12 way SPN DB - 1 no.ii) I/C - 240V, 40A DP Isolator - 1 no.iii) O/G - 240V, 6-10A SP MCB - 12 nos. [Make - Legrand/Siemens/L&T/ABB] |
| 6 | Supply & Fixing of Lift DB Box in SS double door phospotized powder coated suitable size enclosure with DIN rail with IP 43 protection with electrical accessories and front door locking arrangement, concealed in wall after cutting the wall and mending good the damages to original finish, provision for earthing attachment consisting the following items incl. necy. interconnection by suitable size of 1.1 KV garde standard PVC insulated cu wire. a) double door suitable size enclosure - 1 nos. b) 40A 4 Pole MCB Isolator as incomer c) 4 no. 32 Cu bars -- 0.5 mtrs. d) 1 no. 25/32A, 300 mA FP RCBO 16A 2 Pole MCB as outgoing, e) 1 no 16 A 2 pole MCB as outgoing [Make - Legrand/Schneider/L&T] |
| 7 | DISTRIBUTION WIRING |
| 8 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]Average run 8 mtr |
| 9 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.On Board |
| 10 | Supplying and Drawing 1.1 KV single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required |
| 11 | i) 3 x 22/0.3 (1.5 sqmm) |
| 12 | ii) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [For Computer Board & Power Plug] |
| 13 | iii) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [For AC] |
| 14 | iv) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [TPN to SPN DB ] |
| 15 | 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC [VTPN to 4 way TPN DB] |
| 16 | Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles19 mm dia 3 mm thick polythene pipe without earth continuity wire |
| 17 | Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles25 mm dia 3 mm thick polythene pipe without earth continuity wire |
| 18 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 19 | 2×2.5 + 1×1.5 sqmm |
| 20 | 2×4.0 + 1×2.5 sqmm |
| 21 | 2×6.0 + 1×4.0 sqmm |
| 22 | 4×10 + 2×6.0 sqmm |
| 23 | PLUG & SOCKET |
| 24 | Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (6A Socket) |
| 25 | Supply & Fixing 2 nos. 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 2 nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (6A+6A Socket Board) |
| 26 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Power Socket) |
| 27 | Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 16 Module GI Modular type switch board with 2 row 16 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Computer Board) |
| 28 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board withtop cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wireetc.. (For AC) |
| 29 | Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 30 | Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board |
| 31 | SUPPLY & FIXING OF LIGHTS |
| 32 | Supply and delivery of Single LED Fitting (18Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube, as directed by EIC.105 ≤ Luminious efficacy < 120 Lumen/watt. The LED Luminaries & accessories should have BEE certification. |
| 33 | Supply and delivery of Twin LED Fitting (18Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 2 nos LED Tube, as directed by EIC.105 ≤ Luminious efficacy < 120 Lumen/watt. The LED Luminaries & accessories should have BEE certification. |
| 34 | Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required |
| 35 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length |
| 36 | Extra for suspension exceeding 25 cm with S&F additional 2 nos. 20 mm dia E.I. Conduit(14 SWG) support as per G.S & necy. PVC insulatedcopper wire and painting etc, as per required |
| 37 | Supply, Delivery & Fixing PEARL NIOS - R / or similar Round surface mounted LED panel, with PDC aluminum housing and high translucent frosted plastic diffuserwith longer life and less maintenance. 12 W (>100 Lumen/Watt)(Make -Crompton LCDSPLN-R-12-CDL/ or Similar Philps/Wipro Or As per choice of EIC) |
| 38 | Supply & Delivery LED bulk head light fitting as per GS. (Make - Havells / Philips / CG) [Tarace] |
| 39 | Fixing only bulk head ceilling fitting on wall/ceiling by screws etc. |
| 40 | Supply & Fixing of 220-240 V B22 9 Watt CDL/ 6500K LED Lamp as per EIC (Make-Havells/ Philips/Crmpton) |
| 41 | S & F angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. |
| 42 | SUPPLY & FIXING OF FANS |
| 43 | Supply & delivery of 1200 mm sweep 230 volt AC Ceiling fan incl. Blades, canopy etc. With 18\\" down rod(14SWG), Fork(10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc., as directed by EIC. [Make-Orient - Summer cool (1200 mm Metalic Bronze Copper) or similar spec of Crompton/Usha - Striker 1 Star (Safety Wire & S3/P2 Capacitor)] |
| 44 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. |
| 45 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 46 | Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire.[C-3/21b] |
| 47 | Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) |
| 48 | Supply and delivery of 230V 30cm (12\\") Exhaust fan with all necessary accessories, as directed by EIC.[Make: EPC Heavy Duty, Usha, CG, Bajaj or equivalent Make] |
| 49 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:30 cm (12\\") |
| 50 | Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)For 30 cm (12\\") Exhaust fan |
| 51 | Supply & delivery of wall Fan 400 mm, full metal body , air delivery of 110 CMM.The fan comes with a unique pull cord mechanism for On/Off & speed control. The guard & ring of the wall fan are powder coated for longevity & ease of maintenance.Motor of the wall fan is equipped with a thermal overload protection device with auto reset functionality to protect it from overheating, thereby adding to its safety & durability.(Make Orient /Crompton/Usha/ Bajaj/Havells/EPC) |
| 52 | TIMERS |
| 53 | S&F of 250V double door Timer DB [equivalent of 2+8 way SPNDB] with sheet steel enclosure, pnosphitised powder coated neutral bar, DIN rail with IP-43 potection comprising with 1 no. 25A DPMCB ('C' curve 10KA), 2 no. 16A SPMCB ('C' curve 10KA), 1no. Programmable time switch-24 hrs with minimum switching of 15 minutes and 1 no. 18A/25A 2-Pole power contractor with inner-outer plate & internal wiring by suitable size of cu. wire incl. 1 no. Auto-Manual bypass toggle switch and provision for earthing attachment, incl. LED indication light for running condition with mechanical locking arrangement, as directed by EIC. . (For compound lights & Glow sign Board)[Make - Legrand / ABB / L&T / Crabtree] |
| 54 | Supplying and fixing 4way MCB SS enclosure with IP-20/30 protection, powder coated provision for 250V, 1no Programmable Digital timer switch-24 hrs with minimum switching of 15 minute, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. |
| 55 | COMPOUND LIGHTS |
| 56 | Supply & Delivery of 240V, 5400 Lumens (minimum) LED Street Light Fittings with IP 66/ 67, IK 10 protection including 10 KV SPD with CCT 3000K/5700K & Luminious efficacy 120 Lumen/Watt minimum or better, burning hour 100000 at L70850, LED Balast should with stand 440V for 8 hours. The LED luminaires and accessories shall have BEE Certification & LED should be with lens (Light efficacy will not get depriciated less than equal to 70% of the rated value over the lifetime of the Luminaries) (Make: Havels / Philips(Signify) / WIPRO/ Crompton) (Manufacturer warranty should not less than 3 years) |
| 57 | Fixing only outdoor / street light type LED light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes / providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. |
| 58 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. |
| 59 | GLOW SIGN BOARD |
| 60 | SITC of LED Sign Board of size 15' × 4' with front size 3mm thick A-1 quality ACP blue colour (AD-41) board capable of preventing avoid wind pressure which is also to be attached to MS angle structure (front/back side of board of suitable size MS Angle /MS hollow square/rectangle bar by drilling hole incl. S&F special type steel nuts, bolts and waser. The matter of the LED Sign board should be in English and Bengali alphabets made of laser cutting box type by white colour letter incl. all fixing facility from 3mm thick imported white acrylic sheet including jointing/setting the same part by part and fixing on the board by using cloroform/machine screw etc. is to be fixed on ACP board (on front) incl. S&F SMD module (best quality make) of required quality for illumination of this letters including necessary interconnection & SMPS. The matter as per direction of EIC.( 2Nos) |
| 61 | Making necessary arrangement for fixing the above LED board by making necessary supporting structure to resist storm by S&F of 40mm × 40mm × 5mm M.S. angle incl.making brick foundation at on height of 5ft from roof level incl. all fixing accessories including providing necessary fixing materials. |
| 62 | SUPPLY & LAYING OF CABLES |
| 63 | Supply & Delivery 1.1kV grade Al/Ar./XLPE/SWA/PVC cable as per choice of EIC. (Make - Polycab / Havells / RR Kabel / Gloster )a) 4C × 35 sqmm ( Meter to Panel) |
| 64 | S&Delivery of 1.1 kv grade 2Cx6 sqmm XLPE-armoured AL. cable, as directed by EIC.[Make - Polycab/Havells/RR Kabel/Gloster (for compound Light/Pump ) |
| 65 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 66 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, m |
| 67 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : |
| 68 | a) 4core 35sqmm |
| 69 | b) 2 core 6sqmm |
| 70 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : |
| 71 | a) 4core 35sqmm |
| 72 | b) 2 core 6sqmm |
| 73 | EARTHING |
| 74 | Excavation of soil for installation of Earth Electrode and filling & ramming.For Soft Soil |
| 75 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:ByISI-Medium GI pipe [2 nos. for Panel ] |
| 76 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe |
| 77 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 78 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages Solid GI Wire: No.8 SWG |
| 79 | Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. |
| 80 | MISCELLANEOUS |
| 81 | S&F Hylam (size- 3’x3’x3/4”) fixed on wall by 1”x1”x1/4” M.S angle iron frame to G.S (For WBSEDCL meter), as directed by EIC. |
| 82 | Supplying and fixing 415V, 125A TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S&F 3 nos. DIN type HRC fuse as per rating. (L&T/ABB/Havells) |
| 83 | Supply & Delivery of High-wall Split-type Air-Conditioner having following specification:Cooling Capacity - 5.0 kW (Minimum)Minimum ISEER - 3.8, BEE level - 3-Star(min)[1st July22 to 31st December 2025]IS Compliance - IS-1391(Part-I & Part-II) with all amendmentRefrigerant - R410A/R32Compressor - Rotary/ScrollEvaporator & Condenser Coil - CopperOperating outdoor temperature - 48ºC and aboveAir Flow: 600 CFM (Minimum)Power supply -230V, 50Hz (±tolerance asper applicable standard),as directed by EIC.The scope of work is also includes supply and fixing of the following:(i) Necessary refrigeration copper line with nitrile rubber insulation and wrapping tape - 3 mtr(ii) Necessary 3/4 core copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr and 230V, 25A, 3pin plug top with indicator (Anchor/North West/Legrand/Havells) [Make: General/Daikin/Mitsubishi Electric/Blue Star/Voltas/Carrier] |
| 84 | Installation, Testing & Commissioning of Indoor & Outdoor unit of above Hi wall split AC machine after making hole in wall etc. as per direction of EIC including Supply of required Refrigerant, S&F of necessary fixing arrangement for indoor and 40 x 40 x 5 mm MS angle iron frame for outdoor unit (or arrangement recomended by Manufacturer), duly painted, laying and making connection of refrigeration pipe, power cable, drain pipe etc. as per direction of the EIC. |
| 85 | S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of aboove AC machines.(i) Supply & Fixing of Extra Add-on items- HVAC grade 5/8\\"(for suction) & 1/4\\"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above AC machine as per requirement |
| 86 | S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of aboove AC machines.i) 2.5 sqmm, 3/4 core copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) |
| 87 | Supply & laying Soft Drawn PVC Drain Pipe 19mm dia with proper supports & brackets as per direction EIC. (Make: Suprime/Oriplast) |
| 88 | Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run. |
| 89 | Miscellance |
| 90 | Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender