Tender For Improvements Of Multi Purpose Evacuation Centre With Community Hall At Kuttam Government Higher Secondary School In Kuttam Village In Kuttam Panchayat In Radhapuram Panchyat Union
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Oct 2026
6 days left
EMD
9000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvements Of Multi Purpose Evacuation Centre With Community Hall At Kuttam Government Higher Secondary School In Kuttam Village In Kuttam Panchayat In Radhapuram Panchyat Union
BOQ
| Sl. No. | Item Description |
| 1 | Improvements of Multi Purpose Evacuation Centre with Community Hall at Kuttam Government higher secondary School in Kuttam village in Kuttam Panchayat in Radhapuram Panchyat Union |
| 2 | Dismantling of Pressed Tiles & Weathering Course including all cost etc complete (PWD SOR 25-26 W-0037) |
| 3 | Damp proof course in cement mortor CM1:3 - 12mm thick with water proofing compound at 2 % by wt of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 5 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 6 | Supply and fixing of 1.0 HP Monoblock pumpset including all cost etc complete (PWD SOR M-1064) |
| 7 | European Water Closet with P or S Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fitting (PWD SOR M0532) |
| 8 | Supplying and fixing solid core flush shutter of following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202 1(1999) including cost of wind appliances and furniture fittings such as 3 Nos SS 304 Grade Butt Hinges of size (125mm x 30mm) , 2 Nos .300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Single leaf. |
| 9 | Single Leaf |
| 10 | Labour Charges for replacing Fibre glass sheet in Excisting MS window The rate includes cost of fibre Glass Labour Charges etc. Comp |
| 11 | Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete. |
| 12 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 13 | Supplying and fixing Pin Headed Glass Pans 3mm thick : |
| 14 | Water supply arrangement |
| 15 | Drilling of 150mm dia deep borewell in overburden soil including labour charges and transportation charges |
| 16 | Supply and delivery of 150mm dia CS casing pipe(TWAD SOR M-1605) |
| 17 | Supply and delivery of 50mm UPVC Column pipe. |
| 18 | Supply and delivery of 3 phase 2HP submersible motor of duty condition 50Lpm x 40m head (TWAD SOR M-1604) |
| 19 | Supply and delivery of 2HP 3 phase panel board (TWAD SOR M-1909) |
| 20 | Supply and delivery of 75mm 4KSC PVC Pipe |
| 21 | Supply and delivery of 40mm PVC Pipe (PWD SOR M-0878) |
| 22 | Supply and delivery of 32mm PVC Pipe |
| 23 | Supply and delivery of 25mm PVC Pipe |
| 24 | Earthwork excavation and depositing on bank with initial lead and lift of 10m including all cost etc complete. |
| 25 | Refilling with excavated soil other than sand including all cost and all labour charges etc complete |
| 26 | Laying and jointing of 40mm, 32mm & 25mm PVC Pipes and specials etc complete. |
| 27 | Supply and delivery of 4sq.mm 3 core copper cable |
| 28 | Labour charges for erection of new 5HP submersible pump set in the borewell and commissioning |
| 29 | Supply and delivery of Nylon rope. For bore well |
| 30 | Electrical Arrangements |
| 31 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 18 |
| 32 | Light Point |
| 33 | Fan Point |
| 34 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36 |
| 35 | Supply and fixing of WT bulk head fitting suitable with guard and 15 W (100W) LED bulb SD 85 |
| 36 | Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube SD88 |
| 37 | Supply and fixing of 1200 mm ( 48\\") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender