Tender For Installation Of Open Gym, Jhulas And Other Maintenance Work In Devilal Park, Ward No 02, Mc Barwala.
Tender Value
5.89 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
10 days left
EMD
11800
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Open Gym, Jhulas And Other Maintenance Work In Devilal Park, Ward No 02, Mc Barwala.
BOQ
| Sl. No. | Item Description |
| 1 | Multiplay Station jhula with size 27*15*13ft with 1 Nos climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 ft long Spiral Slider of 6mm thick, 10 ft long Wave Slider of 6mm thick, Tunnel 5 ft long of 4mm thick Etc. with 3” sq. pipe, 1.6” sq. pipe, 3”*1” sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom. |
| 2 | Basic cost of Supply and Erection of 3Mtr. Decorative Pole with Post Top LED light of 30 watts complete in all respect as per drawing new |
| 3 | Supply, erection, testing and commissioning of 3 phase Automatic timer AMSons/LandT/Indoasian/CandD make to ON/OFF the street light on different fixed timing maintainable on street light pedestal, pillar, wall M.S. pedestal where ON/OFF point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection ON/OFF from bottom of the cabinet, 3 contractors 25 Amp, 24 volts D.C. each 2 transformers, rectifier system, switching system, Bakelite contractor, 32 Amp, MCB, 32 amp Havells digital timer Auto/Manual system, time setter, fiber sheet, rubber, and plastic component, wiring and component fitting, chemical (Epoxy) the job includes allied material, labour, erection, testing and commission at site including cost of material complete in all respect up to the entire satisfaction of Engineer-in-Charge. |
| 4 | Supply of PVC sheathed aluminium flexible cable in existing pipe/trench etc. of size 1.5 sq mm 2 core for working voltage up to 1100 volts conforming to IS1554 (Part-1) 1988/7098 (Part-1) with aluminium conductor ISI marked complete in all respect as per standard specification up to the entire satisfaction of Engineer-in-charge (Make: - Grandlay| Havells| KEI or its equivalent)- |
| 5 | Providing and fixing of Leg Press Dual equipment made up of 4inch B class GI pipe: Prime Stand duly bend, Foundation center pipe.60mm seamless pipe bushes.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality. High quality rubber grip are also used for firm handling.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm. Allen Bolts are also used to tighten the closing cap. Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness. |
| 6 | Providing and fixing of Double Twister/Standing Twister equipment made up of3inch B class GI pipe: Prime Stand duly,Foundation center pipe.60mm seamlesspipe bushes.Permanent lubricated Ballbearings 6205zz/6205-2rs.All weldedjoint are of good quality.High tensile steelwith galvanized nut and bolts to beused.The Circlips to be used are of25mm.Allen Bolts are also used to tighten theclosing cap.Closing cap of HDPE / PPCP Plastic isused.The powder coating done with Purepolyester powder with 60 to 70 micronthickness. |
| 7 | Providing and fixing of Seated Rowing equipment made up of 3inch Bclass GI pipe: Prime Stand duly bend, Foundation center pipe.The pins used are made up of 25mm hardened bright bar.Permanent lubricated Ball bearings 6205zz/6205-2rs.All welded joint are of good quality.High quality rubber grip are also used for firm handling.The bushes (Stopper) used to avoid the collision.High tensile steel with galvanized nut and bolts to be used.The Circlips to be used are of 25mm.Allen Bolts are also used to tighten the closing cap.Closing cap of HDPE / PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness |
| 8 | Installation of Open Gym, Jhulas and other maintenance work in Devilal Park, ward no 02, MC Barwala. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender