Tender For special Repair To W/S Installations, Filtration Plant Including B/R Works At Alhilal Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Oct 2026
11 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To W/S Installations, Filtration Plant Including B/R Works At Alhilal Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and as directed. |
| 2 | M&L for Plain cement concrete, (1:2:4) Type B-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc, complete all as specified and directed. |
| 3 | M&L for Walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed. |
| 4 | All as per serial item No. 03 above but except stone, complete all as specified and as directed.(Note: Old stone obtained against dismantling/demolition shall be used). |
| 5 | M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6) complete all as specified and directed. |
| 6 | M&L for 15mm thick rendering on other than fair faces of brick work / stone masonry, concrete surface in cm 1:4 to be finished even and smooth with out using extra cement complete all as specified and directed. |
| 7 | M&L for 15mm thick rendering on other than fair faces of brick work / stone masonry, in cm 1:4 to be finished even and smooth with out using extra cement including taking down cement plaster of any description on brick or stone or cement concrete surfaces etc, complete all as spfd and directed, incl mixing of water proofing compound complete all as specified and as directed. (Note - water proofing compound shall be measured and paid seperately) |
| 8 | M&L for complete removal of existing treatment, prepare the surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces of wall, complete all as specified and as directed. |
| 9 | M&L for Preparation of old plasteres wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint upto 15m height, complete all as specified and as directed. |
| 10 | M&L for preparation of old plastered surface of walls and applying two coats of white wash complete all as specified and directed. |
| 11 | M&L for PCC Type B-1 1:2:4 (using 20 mm graded crushed stone aggregates) as in coping, cills, steps, in lintels upto 1.5m clear span and similar other works like bands, plinth courses, lacing courses, bed plates, water troughs and the like incl weathering, slightly rounded or chamfered angles and throating, incl necessary form work, complete all as specified and directed. |
| 12 | Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level) and disposal of debries outside the premises complete all as specified and directed. |
| 13 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and disposal of debries outside the premises complete all as specified and directed. |
| 14 | Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and directed |
| 15 | M&L for 150 mm thick Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 16 | M&L for 75mm PCC, 1:3:6 Type C2 (using 40mm graded crushed stone aggregates) as in sub base of flooring finished even and fair without using extra cemen / finished even and rough, complete all as specified and directed |
| 17 | M&L for for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 18 | M&L for 75 mm thick cement concrete 1:4:8 type D-2 (40 mm graded crushed stone aggregates) as in Sub base etc., complete all as specified and directed |
| 19 | M&L for Cement concrete 1: 1.5: 3 A-1 nominal Mix using (20mm graded aggregate)as in floor of hardstanding over sub base, finished even and smooth with using extra cement complete all as specified and directed |
| 20 | M&L for Forming construction joint 30 mm deep 10mm wide, filled with sealing compound grade 'B' complete all as specified and directed |
| 21 | M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitred/stopped end etc complete all as specified and directed. |
| 22 | M&L for Plain cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed. |
| 23 | Dismanting posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground or lean concrete etc and making good disturbed portion, complete all as specified and directed |
| 24 | M&L for Mild steel work as in posts & struts in fencing using angle, iron or other sections, including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting and reveting etc. and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 25 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 26 | S & F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc: as directed (each line wire to be measured) complete all as specified and directed. |
| 27 | M&L for Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 28 | M&L for preparation of old painted steel surfaces of doors/windows/railings/CGI sheet over roof or any description not otherwise described over 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 29 | M &L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed. |
| 30 | Writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high on walls complete all as specified and directed by Engineer in Charge incl obliterating old writing of any description with paint to match existing work complete all as specified and directed. |
| 31 | Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) Exc 1.5 sqm but n. exc 4 sqm complete all as specified and directed. |
| 32 | S & F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. |
| 33 | S&F Flush shutters 30mm thk, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as spfd and directed. |
| 34 | M&L for Preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, on wood and wooden based surfaces of any description, not other wise described, complete all as specified and directed. |
| 35 | M&L for preparation of new or old plastered surface by cleaning and washing of wall, floor and ceiling by alum and applying two coats of Dr. Fixit (Pidifin 2K) or equivalent complete all as specified and directed. Note- Water Proofing Chemical should be non toxic and fit for drinking purpose complete all as specified and directed. |
| 36 | M&L for repair of Honeycomb, construction joint, cracks repair and injection ground reconditioning of RCC water tank as follow:-(i) Chipping all loose concrete and cement plaster on the surface and desilting if any.(ii) All construction cold joints and cracks cutting 8mm 20mm (U, V shape). Cleaning of joints properly bond coat of SBR based bonding agent slurry coat. Filing of joints, cracks with high strength durable strong structural repair polymer fiber reinforced modified mortar- Shall Fix-FRM & Shalimar DAM-it.(iii) Drilling holes in the concrete surface using electric drill for fixing of PVC Nozzles (4 to 6 inch DISTANCE) at specified joints areas only wherever cracks, construction joints and honey comb area only using 12-14 mm dia. Drilled upto 6 inch deep in the RCC structure placed ans fixed with STP quick setting under water repair mortar. Chemical to be injected by using manual pump at pressure of up to 40 psi injecting STP SHALI GROUT IP or SHALI SBR NON SHRINK FLOWABLE POLYMERISED LIQUID- pressure through injection pump. Checking & sealing removing of nozzles after injection process is over.(iv) After successful surface preparation apply PRIMER + 3 COAT OF SHALICEM EWP Highly Elastic Cementitious Elastomeric coating with reinforcement fiber glass net of 40/50 gsm- food grade coating with sprinkleing of sand. |
| 37 | Dismantling of plain or corrugated steel sheeting, including nanital or similar pattern roof covering, M&L pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Sheet colour approved by GE, complete all as specified and directed. |
| 38 | S&F, Rolled Mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing ( beam, tee, angle, channel, tubular or flat sections) including distance pieces, cleats etc confirming to Fe 410 ( gde E-250) quality 'A' , complete all as specified and as directed. |
| 39 | Dismanting wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 40 | Supply, installation, connecting and testing sluice valve 150 mm bore cast iron body class-PN-1.6 with flanged ends drilled pipes, IS marked (IS 14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old unserviceable sluice valve complete all as specified and as directed. |
| 41 | Supply, installation, connecting and testing sluice valve 200 mm bore cast iron body class-PN-1.6 with flanged ends drilled pipes, IS marked (IS 14846:2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old un-serviceable sluice valve complete all as specified and as directed. |
| 42 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, taking up/down or laying of GI tubing/CI pipe etc for shaft, wells, cesspits, manholes, per holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed. |
| 43 | Returning, filling, in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and as directed. |
| 44 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed. |
| 45 | Cutting the existing hard standing/metal road to facilitate for laying of GI pipe line/LT cables and making good the disturbed portion to bring it to original condition with PCC 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed. |
| 46 | Taking up or cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 150 mm complete all as specified and as directed. |
| 47 | Taking up or down 200 mm bore CI/DI pipes( including all fittings), with spigot and socket ends or flanged ends and lead joints including burning out joints, rubber joints from trenches/walls /floors including cleaning for re-fixing or remove to story yard credited to contractor complete all as specified and directed. |
| 48 | Supply, laying, jointing and testing of DI pipe 150 mm bore with spigot and socket ends, centrifugally cast class-K-9 suitable for tyton joints, in any length, laid in trenches/pillars complete all as specified and directed. |
| 49 | Supply, laying, jointing and testing of DI pipe 200 mm bore with spigot and socket ends, centrifugally cast class-K-9 suitable for tyton joints, in any length, laid in trenches/pillars complete all as specified and directed. |
| 50 | Material and labour for CI/DI Fittings such as bends (any type radius and angle ) tapers any type, bends , tee pieces single branch Y junction double branch cross ( all type socket as spigot and socket etc ),coller cap and plugs suitable for spigot and socket pipe from 200mm bore including rubber gasket complete all as specified and as directed. |
| 51 | Material and labour for CI/DI Fittings such as bends (any type radius and angle ) tapers, bends, tee pieces single branch Y junction double branch, cross (at type socket as spigot and socket etc) ,collar, cap and plugs suitable for spigot and socket pipes upto 150 mm bore including rubber gasket complete all as specified and as directed. |
| 52 | M&L, run lead joint for DI/CI spigot and socket pipe (water main) and fittings for 150 mm bore including taking out old lead from joints complete all as specified & directed. Note:-Excavation and earth work shall be measured and paid separately |
| 53 | M&L, run lead joint for DI/CI spigot and socket pipe (water main) and fittings for 200 mm bore including taking out old lead from joints complete all as specified & directed. Note:-Excavation and earth work shall be measured and paid separately |
| 54 | M&L, rubber gasket joints (tyton joints) for CI/DI pipes of 150mm bore spigot and socket pipes including taking out old unserviceable tyton joint complete all as specified & directed. Note:-Excavation and earth work shall be measured and paid separately |
| 55 | M&L, rubber gasket joints (tyton joints) for CI/DI pipes of 200mm bore spigot and socket pipes including taking out old unserviceable tyton joint complete all as specified & directed. Note:-Excavation and earth work shall be measured and paid separately |
| 56 | Cutting of existing 150mm bore cast iron pipe in position to required length for repairs of blockage or insert new CI fitting such as collars, branches, tee etc or pipe complete all as specified and directed. Note- Excavation and earth work fittings,pipe etc shall be measured and paid separately |
| 57 | Cutting of existing 200mm bore cast iron pipe in position to required length for repairs of blockage or insert new CI fitting such as collars, branches, tee etc or pipe complete all as specified and directed. Note- Excavation and earth work fittings,pipe etc shall be measured and paid separately |
| 58 | S&F in replacement of mechanical joint suitable for 150 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. |
| 59 | S&F in replacement of mechanical joint suitable for 200 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender