Tender For Special Repair To Bldg No. P-106 (05 Or Md Accn) At Mm Line And P-530 (04 X Jcos Md Accn) At Krishna Enclave Under Ge (P) No.1 Jabalpur
Tender Value
55.48 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
14 days left
EMD
1.11 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No. P-106 (05 Or Md Accn) At Mm Line And P-530 (04 X Jcos Md Accn) At Krishna Enclave Under Ge (P) No.1 Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | M&L taking up or down, 20mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed |
| 2 | M&L taking up or down, 25 mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed |
| 3 | Dismantling water tanks and removing to store capicity exc 250 ltrs and n exc 500 ltrs complete all as specified and directed |
| 4 | Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site. |
| 5 | Taking down chowkats and frame n.exc 1.5 Sqm each (Door/window/Ventilator ) including shutters without taking off shutters from the frame and removing from site. |
| 6 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site. |
| 7 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed by engr-in-charge. |
| 8 | M & L for taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles |
| 10 | Dismantling of Stone slabs and kota stone, Granite, Chequered tiles, Paver block, etc of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed. |
| 11 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises |
| 12 | Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) |
| 13 | M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6,complete all as specified and directed |
| 14 | Material and labour for 15mm thick (in two layers 10mm+5mm) cemet plalster in CM 1:4 over brick wall / concrete surfaces using WPC, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note-WPC will be measurd and paid seprately) |
| 15 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed. |
| 16 | Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 17 | Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 18 | M&L for cement concrete type B1 1:2:4 (20mm graded aggregate)as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,Hold fast and similar works water troughs and the like including weathering, slightly rouinded for chamfered angles and necessary formwork all as specified and as directed |
| 19 | S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with double rebates including necessary fixing lugs, hinges, lock strike plate etc, M & L for providing PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge. |
| 20 | S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, with single rebates including necessary fixing lugs, hinges, lock strike plate etc, M & L for providing PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge. |
| 21 | S&F 35 mm factory made shutters of second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and directed |
| 22 | M&L for 35 mm thick 2nd class hard wood glazed/gaused and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified. |
| 23 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match as in shutters including 1 mm thick mica fixed with adhesive of colour approved by engr in charge complete all as specified and directed. |
| 24 | S & F Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S & F Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT Station : Jabalpur NAME OF WORK: COMPREHENSIVE B/R WORKS IN OFFRS MD ACCN AND OTM ACCN IN THE AOR OF AGE B&R-I UNDER GE (W) JABALPUR. Sl No Brief Description A/U Qty Rate Amount Remarks |
| 26 | S & F Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT Station : Jabalpur NAME OF WORK: COMPREHENSIVE B/R WORKS IN OFFRS MD ACCN AND OTM ACCN IN THE AOR OF AGE B&R-I UNDER GE (W) JABALPUR. Sl No Brief Description A/U Qty Rate Amount Remarks |
| 27 | Old 20 mm dia GI tubing |
| 28 | Old 25 mm dia GI tubing |
| 29 | Old unserviceable PVC water tanks 500 ltr capacity including ball valves . |
| 30 | Old Unserviceable chowkhats with shutter exc 1.5 sqm non exc 4 sqm each including all fittings |
| 31 | Old Unserviceable wooden/ steel chowkhats with shutter of door/ window/ ventilator n. exc 1.5 sqm including all fittings |
| 32 | Old U/S Door Shutter/cuboard shutter exc.1.0sqm n.exc. 2 sqm of any description including all fittings |
| 33 | Old brick bats of Any Description |
| 34 | Scrap Iron |
| 35 | Old unserviceable AC sheet/Fibre sheet |
| 36 | Old u/s Flushing cistern Low level/High level |
| 37 | Old U/s Kitchen Sink SS of any size any description. |
| 38 | Old U/s stop cock, angle cock, shower rose of any size any description. |
| 39 | Old u/s PVC connection of any description. |
| 40 | Old Unserviceable CP Bib tap, pillar tap of any size any description |
| 41 | Old Unserviceable CP Mixer of any size any description |
| 42 | Old Unserviceable Gully trap of any size any description |
| 43 | Old U/s floor Trap of any description. |
| 44 | Old Unserviceable Towel rail |
| 45 | Old Unserviceable Plate Rack |
| 46 | Old 75/100 mm PVC (SWR) Pipe of any dia any desription |
| 47 | Old u/s curtain rod, knob, bracket of any description |
| 48 | Old u/s curtain Mirror of any description |
| 49 | Old u/s PVC cabinet mirror of any description |
| 50 | Old U/s Glass Shelf of any size and any description |
| 51 | Old U/s Towel Ring of any size and any description |
| 52 | Old U/s Inter locking paver block of any size and any description |
| 53 | Old U/s wooden scantling |
| 54 | Old U/s false ceiling |
| 55 | Old U/s Copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings. |
| 56 | Old u/s Copper/Aluminium sub main wiring any size with conduits and all accessories. |
| 57 | Old u/s DBs/sheet metal enclosure any type/capacity/size. |
| 58 | Old u/s MCBs/MCCB any type/capacity/size. |
| 59 | Old u/s Socket any type. |
| 60 | Old u/s switch any type/Any size . |
| 61 | Old u/s Bell any type/Any size . |
| 62 | Old u/s Frame Plate any type/Any size . |
| 63 | Old u/s Housing Box any type/Any size . |
| 64 | Old u/s Ceiling Rose. |
| 65 | Old unsv Light fittings any type. |
| 66 | Old fan regulator. |
| 67 | Old earthing materials any type. |
| 68 | Old unsv cable any type/Any size |
| 69 | Old unsv DWCPE pipe any type/Any size |
| 70 | Old unsv brick Bat |
| 71 | Old unsv GI pipe any type/Any size 92624.0 |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender