Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #57821755

Tender For Repairs To Approach Path, Steps, Chequered Tiles, Paver Block , Plain Cement Concrete Hard Standing Etc At Dssc Wellington

Issued by Statutory Bodies & Commissions/Committees · Nilgiris, Tamil Nadu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Oct 2026
20 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs To Approach Path, Steps, Chequered Tiles, Paver Block , Plain Cement Concrete Hard Standing Etc At Dssc Wellington

BOQ

Name of Work:- REPAIRS TO APPROACH PATH, STEPS, CHEQUERED TILES, PAVER BLOCK , PCC HARD STANDING ETC AT DSSC WELLINGTON
Sl. No. Item Description
1Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris off the site complete all as specified and as directed.
2Demolition of stone slab, floor hearth or wall tiling laid bedded and pointed in any mortar (but not backing) complete all as specified and directed.
3M&L hardcore of gauge n.exc 63 mm deposited, spread and levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.
4M&L 75mm thick PCC 1:3:6 type C2 (40 mm graded aggregate) as in Sub base floor finished even and fair to receive top layer of floor etc all as specified and as directed.
5M&L for Sand cushioning under concrete interlocking paver block and consolidation complete as specified and as directed.
6M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade jointed with grey cement and no pigment complete all as specified.
7M&L heavy duty vitrified unporcelain floor tiles of size 300x300 mm , 10 mm thick suitable for heavy vehicles movement, laid in floors/skirting of pattern as approved set and jointed with Epoxy grout with spacers to match over 20 mm thick cement mortar (1:6) complete all as specified and as directed.Make: Neo Deccan Natural of Somany , Endura of Johnson, Orient Bell or equivalent.
8M&L Chequered cement concrete tiles of size 30cmx30cmx 25mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and no pigments of required colour over 20 mm thick cement mortar (1:6) complete all as specified and directed.
9Demolition of brick work built in cement mortar including all quoins arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete as specified and as directed.
10M&L Precast cement concrete solid block masonry with solid blocks exceeding 10 cm in width 1:3:6 type C1 (using 20mm graded aggregate) and set in cement mortar 1:6 all complete all as specified and directed.
11S&F for stainless steel (grade 304) railing made of hollow tubes, channels, plates etc, including embedded in cement concrete 1:3:6 to floors and welding, grinding ,buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories like SS ball caps ,floor caps etc complete including taking down old UNSV rail etc complete all as specified and as directed.
12S&F for taking down old loosen stainless steel (grade 304) railing,balusters made of hollow tubes, channels, plates etc, including embedded in cement concrete 1:3:6 to floors and ,buffing, polishing and refixing the same with necessary stainless steel nuts , bolts and ols stainless steel chain etc. complete all as specified and as directed.
13S&F for stainless steel (grade 304) SS ball caps fixing in the railing with necessary welding including taking down old UNSV caps etc all as specified and as directed.
14S&F for stainless steel (grade 304) SS floor caps fixing in the railing with necessary welding including taking down old UNSV caps etc all as specified and as directed.
15S&F for stainless steel (grade 304) chain 4 mm size including necessary welding at joints, grinding to SS railing etc including taking down old UNSV SS chain etc all as specified and as directed.
16Excavating in Post holes (or similar holes) (soft/loose soil) each n exc 0.50 cum, getting out, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, watering and removing surplus soil to a distance not exc. 50 m and making good surfaces in soft/loose soil, complete all as specified and as directed.
17M&L for Plain Cement Concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, etc., complete all as specified and as directed.
18Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m depth for pipes, manholes, etc not exceeding 10 sqm on plain and not exceeding 1.5 meter in depth and getting out in soft/loose soil complete as specified and as directed.
19Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level n.exc 1.5m above the starting point complete as specified and as directed.
20Returning, filling in foundation including spreading leveling, watering and well ramming in layers not exceeding 25 cm depth complete as specified and as directed.
21Material and labour for Rendering in Cement Mortar ( 1:4), 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
22M& L for applying two coats of white wash on walls including preparation of newly plastered surfaces of walls of any description complete all as specified and as directed.
23M & L for preparing old surfaces applying one coat of floor tile guard paint(ready mixed paint for use on floors) as approved complete all as specified and as directed.
24M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate steps, seismic and other similar bands, plinth courses string courses, lacingcourses,parapets and railing upto60cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slighty rounded or chamfered angles and throating, complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57821755
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 22-10-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repairs To Approach Path, Steps, Chequered Tiles, Paver Block , Plain Cement Concrete Hard Standing Etc At Dssc Wellington
Basic Detail
Tender No 8706/E8
Bidding Type Tender
Location
City Nilgiris
State Tamil Nadu
Key Dates
Publish Date 01 Oct 2026
Submission Date 22 Oct 2026
Open Date 29 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 60000
Exemption Available
Document List
8706Tender.pdf
99edf98a-846f-4ff1-9f01-fed0724b9231.html
BOQ_888070.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 01, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 22, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Oct 29, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 27 days

Tender Documents

Download All (ZIP) ↓
pdf

8706Tender.pdf

html

99edf98a-846f-4ff1-9f01-fed0724b9231.html

xls

BOQ_888070.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders