Tender For Construction Of Bondariwal In Ward No 2 Veterinary Hospital In Nagar Panchayat Barauli.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Oct 2026
13 days left
EMD
1.99 Lakhs
Bank guarantee accepted
Document Fee
2400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Bondariwal In Ward No 2 Veterinary Hospital In Nagar Panchayat Barauli.
BOQ
| Sl. No. | Item Description |
| 1 | 2.8 Earth work in exoavation by mechanicalmeans (Hydraulic excavator)/ manual meansin foundation trenches or drains (not exceeding 1.5 m in width or 10 sgm on plan), including dressing of sides and ramming of bottoms, for all in, including getting out Mthe excavated soil and disposal ol surplus excavaled soil as (direcled, within a lead of 50 m. 2.8.1 All kinds of soll. |
| 2 | Providing and laying granular sub base aggregate layer in uniform th. Complete with compaction with road roller coniplete item(analysis enclosed) |
| 3 | cement concrele 1:2:4, c. sand & ston ballast complete ilem. |
| 4 | Providing and laying in position cement concrele of specificd gradc cxcluding the cost of ceniering and shutiering - All work up to plinth level : dsr no. 4.1.8@6812 1:4:8 (1 Cement :4 coarse sand (zone-III) erivcd from atural sources : 8 gradod stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Centering and shuttering inchuding strutting,propping etc.and removal of form for Foundations, footings, bases of columns, etc.for mass concrete DSR No.5.9.1 Rate 392.15 |
| 6 | Centering and shuttering including strutting, propping etc.and removal of fom for DSR no 5.9.2 Walls (any thickness)including attached pilasters, butteresses, plinth and string courses etc. Rate 842.50 |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | RCC Work for Beam & Column DSR no. 5.2 R.C.C work in walls etc.: 5.2.21:1. 5:3 (I cement : 1.5 coarse sand derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Sieel reinforcemenl for R.C.C. work includingstraightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500Dormore. |
| 10 | Brick work with common bumt clay F. P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 11 | Brick work 1:4 with cement and courscsand super struture |
| 12 | Plaster 12 mm thick |
| 13 | 13.80 Providing and applying white cement based putty of average thickness I mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.sqm 156.05 |
| 14 | Finishing walls with textured exterior paint of required shade :13.45.1 New work (Two or more coats applied 3.281tr/10 sgm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 15 | 10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting thesame with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts ctc., of rcquired sizc, on thc top of thc floor or thc sidc of waist slab with suitable arrangement as per approval of Enginecr-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing acccssorics such as nuts, bolts, fasteners etc.). |
| 16 | 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade.laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slury Double charge vitrified tile polished finish of size 11.41A.1.1 Size of Tile 600 x 600 mm. |
| 17 | Providing and fixing angle iron frames for doors,windows and ventilator of mild steel Angle sectionsof size 35 * 35 * 5 mm, joints mitred and welded by angle iron 35 * 35 * 5 mm or 35 * 5 mm flat pieces tothe existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 18 | earth work in filling. |
| 19 | Adding 18% GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender