Tender For Providing Infrastructural Facility To Fish Landing Centre At Trombay In Maharashtra.
Tender Value
43.90 Crore
Estimated cost
Bid Submission
15 Oct 2026
0 days left
EMD
21.95 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Infrastructural Facility To Fish Landing Centre At Trombay In Maharashtra.
BOQ
| Sl. No. | Item Description |
| 1 | Providing Infrastructural Facility to Fish Landing Centre at Trombay in Maharashtra. |
| 2 | Item No. 1 Excavation/ Dredging in soft strata such as we soils, slush, sand or silt by mechanical means including use of centrifugal pump for removal of water or by any other approved method, stacking / dispossing off the removed stuff as directed with a lead of 1.00km lead and all lifts etc. complete.(in tidal condition) |
| 3 | Item No. 02:- Bathymetry Survey (Pre-dredging &Post-dredging) by Multibeam Carrying out the underwater bathymetry survey by using multibeam USV (Underwater survey vehicle) along the sea shoreline and in creek to identified the bed profile of sea as specified area in this tender. The point cloud density should be minimum 20 point per square meter, Digital elevation model from the point cloud should be generated for the tidal data |
| 4 | Item No. 3:- Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia over burden ( by diamond drilling machine ) such as soil of all sorts, soft murum,hard murum and boulders and in soft rock including all materials such as casing pipes and accessories oil, grease, steel, rods, and such other materials as required (including conveying the material to site of work) . Preserving the loose sample in glass jar and core sample serially on site of work and conveying the same to HQ of concernring office as directed.a) over burden 0 to 50 meter. |
| 5 | Item No. 4:- Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia in rocks as specified below including all necessary materials such as oil,grease,steel boostan and such other materials as required (including conveying the material to site of work) and Preserving the core sample serially on site of work and conveying the same to HQ of concernring office as directed. Quartzite with diamond drill with Nx Bit 0 to 50 metre |
| 6 | Item No. 5:- Providing and maintaining temparory platform for erecting boring machined in river bed to the depth of standing water 2 m and above and of size 3.50 x 4.00 M by using 20 Nos. of M.S. empty barrels in M.S. frame made of M.S. angle size 50 x 50 x 5 mm with fabrication and over it a jungle wood planks platform of size 3.50 x 4.00 x 0.03 M size including supplying of nylon rope 24 mm dia. for anchoring platform include passage platform and enganging a labour etc. complete. 2 m and Above. |
| 7 | Item No. 6:- Shifting boring plant with all its components and reinstalling the same at the directed place including all its charges etc. complete. |
| 8 | Item No. 7:- Providing tun tappa core boxes of jungle wood of size1.25mx 0.35x 0.15m for preserving core sample with all fixtures and fastening handles including locking arrangment etc . complete. |
| 9 | Item No. 8:- Providing detailed reports of the inspection logging of drilled hole by observing visual description of data as per depth, thickness of layer, type of sample, wash sample, bore recovery type of drill etc. complete. |
| 10 | Item No. 9:- Providing detailed geological reports of proposed site by maintaining geotechnical investigation of structure stratification collecting soil, rock and ground water samples for laboratory tests to arrive the foundation design parameters . Rock properties such as type of rock, jointing fractures, etc. complete with suggestion about the site foundation and remedies. |
| 11 | Item No. 10:- Providing and laying cast in situ / ready mix M40 RCC for 1000 mm diameter bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except hard rock, excluding provision of reinforcement including placing concrete by tremie arrangement, compaction of concrete and withdrawal of steel shell with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete.with natural sand /VSI quality artifical sandi) Add 30% extra for depth 5 to 10 mii) Add 40% extra for depth 10 to 15 miii) Add 60% extra for depth 15 to 20 miv) Add 100% extra for depth above 20 m |
| 12 | For 0m to 5m Depth |
| 13 | For 5m to 10m Depth |
| 14 | For 10m to 15m Depth |
| 15 | For 15m to20m Depth |
| 16 | For above 20m Depth |
| 17 | Item No.11:- Extra for Chiselling in hard rocks including removing and stacking the loose material and disposing the unserviceable materials as directed etc. complete. 900mm dia |
| 18 | Item No. 12:- Chipping and dressing of the R.C.C. piles upto 0.60 meter including cleaning reinforcement and removal of dismantled materials upto a distance of 50 meter beyond the building area etc. for providing pile caps. |
| 19 | Item No. 13:- Providing, placing and driving in position 6mm thick permanent MS liner up to required depth with 12 mm thick MS cutting edge of 0.50 meter length of bottom including fabricating, cutting the MS sheet to required diameter and shape, welding the joints and driving with the help of required machineries, all materials, labour and lift etc. complete. |
| 20 | Item No. 14:- Providing and laying in situ / ready mix controlled M-40 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete pile caps, caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with Natural / VSI standard Artificial Sand |
| 21 | Item No. 15:- Providing,transporting and placing in position precast pretensioned concrete girders as per drawings and technical specifications etc. complete. |
| 22 | Item No. 16:- Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap /quartzite/granite/gneissmetalforR.C.C.Waist slab,and steps of staircase as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surfacewithC.M. 1:3 of sufficient minimum thickness to give as mooth and even surface or roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag,plastic, tarpaulinetc.) with fully automatic micro processor based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 23 | Item No. 17:- Providing and laying in situ / ready mix M-40 controlled cement concrete of trap/ granite/quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSIsand finely washed etc ) i) Height up to 5 m, normal rate.ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.iii) Height 7.50 to 10 m, 7.50 percent extra.iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. |
| 24 | Item No. 18:- Providing and fixing in position HCRM/ CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. Pile,pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (In Tidal Conditions) |
| 25 | Item No. 19:- Providing expansion joints in R.C.C. framed structure (at floor level) with premoulded filler 25 mm thick & 3 mm thick alluminium plate as required, bitumen poured filler & fixing T.W. battens on rear faces etc. complete as directed. |
| 26 | Item No. 20 :-Providing vent holes 100 mm dia G.I. pipe in slab & wearing course with iron grill at top & G.I. pipe at bottom. |
| 27 | Item No. 21:- Providing & fixing S.S. bollard of steel pipe 1.00 m long of 250 mm inner dia & circular top plate of 350 mm dia with 5 mm thickness on deck of jetty in C.C. including necessary fixtures & fastening, etc. complete. (Stainless steel of grade S-304) |
| 28 | Item No. 22:- Providing & fixing S.S. mooring ring in C.C. on deck of jetty consist of 32 mm thick steel bar, 225 mm inner dia, steel ring with 75 mm inner dia steel hook of 32 mm dia as per approved drawing, etc. complete. (Stainless steel of grade S-304). |
| 29 | Item No. 23:- Providing Temporary structural steel Gantry platform to be constructed with structural steel work including trasnporation, fabricting all materials, labour and equipment with gantry frame of driving and casting of reinforcement cement concrete piles including dismanatling platform after completion of work and including demobilization from site with all materials etc complete.Payment Terms1. 20% on eraction of grantry2. 40% on completion on 50% of scope (Pile)3. 30% on another 50% completion of complete scope of piling4. 10% demolition & demobilization of grantry |
| 30 | Item No. 24:- Providing and fixing D Type Fenders of Size: 250mm x 250mm x125mm x 125mm D hollow, Length: 3 meters long each piece, along with fixing accessories which includes: flat bars (HDG) and bolt with nuts & washer (SS316) |
| 31 | Item No. 25:- Carrying out load test for 1.5 times the proposed safe working load on the pile in driven position above 550 milimetre and upto 650 milimetre diameter including construction of test cap, use of accessories and instruments including providing graphs as per Indian Standard code or standard specifications and dismantling the test cap after testing and cleaning the site complete. |
| 32 | Item No. 26:- Carrying out integrity test on piles of various diameters as per standard procedure and submitting reports. |
| 33 | Item No. 27:- Providing Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with R.C.C. M 30 Grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified etc. complete. Spec: MORT and H 2013 Cl 811 Page No 360 |
| 34 | Item No. 28:- BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 35 | Item No. 29:- Providing and laying 12 mm thick mastic asphalt wearing course on top of deck slab excluding prime coat with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 4.75 mm nominal size at the rate of 0.005 cum per 10 One Square Metre and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces not less than 100 deg C, protruding 1 mm to 4mm over mastic surface as per clause 515 etc. complete. |
| 36 | Item No. 30:- Providing and laying in situ M-40 grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (V.S.I. grade finely washed crushed sand) conforming to Indian Standard : 383, using fine and coarse aggregates combined gradation as per Table 600-3 of Ministry of Road Transport and Highways specification 2013, mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer in-charge and curing by curing compound / by providing cement vata in cement mortar 1:8 at 0.6 metre X 0.6 metre center to centre, admeasuring 80 milimetre at bottom and 40 milimetre at top with depth of 75 milimetre and maintaining the same throughout curing period or by any other method approved by Engineer in-charge, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. (In Tidal Condition) |
| 37 | Item No. 31:- Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By Mechanical Means )a) Upto 1.50m lift Normal Rate |
| 38 | Item No.32:- Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By Mechanical Means )b) 1.50m to 3.00m lift, Add 10% |
| 39 | Item No. 33:- Supplying & spreading geofabric filter layer of Geotextile of Polypropylene multifilament woven to line, level & grade with pore size less than 0.075 mm & permeability greater than 9.0 lit / sqm / IInd confirming specification IS:1969 & ASTM standard including conveying to site, joining & stitching with proper overlap & laying at excavated surface in tidal condition as directed by Engineer- in- Charge, etc. complete |
| 40 | Item No. 34:- Providing and laying filter layer of polythene bags, filled with sand obtained from excavation of foundationincluding conveying and placing in proper line, level as per drawing in tidal condition as directed by Engineer - n- Charge. |
| 41 | Item No. 35:- Supplying & laying trap stones upto 20 kg for Filter / Core layer including conveying with all leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments & machinery as directed by, etc. complete in tidal conditions. |
| 42 | Item No.36:- Providing and laying trap stones weighing 100 to 200 kilogram for Core / Sub armour / Armour layer including conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by etc. complete in tidal conditions. |
| 43 | Item No. 37:- Providing and laying trap stones weighing 500 to 1000 kilogram for Apron / Armour layer including, conveying with all the leads, lifts, laying in required lines, level, slope as per drawing including necessary equipments and machinery as directed by etc. complete in tidal conditions. |
| 44 | Item No. 38 :- Providing and laying in situ M-30 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. complete. |
| 45 | Item No. 39 :- Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers withmotor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401--Plant Mix Method and Grading - I Material |
| 46 | Item No. 40 :- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete |
| 47 | Item No. 41:- Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS:383, the size of coarse aggregate not exceeding 25mm, cement content not to be less than 150kg/cum,optimum moisture content to be determined during trial length construction, concrete strength not to be less than10Mpa at 7days,mixed in a batching plant/Weigh batch mixer, transported to site with all lead sand lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub grade surface if required etc.complete. with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mixplant (Panmixer) etc. complete. |
| 48 | Item No. 42 :- Providing and fixing in position TMT FE500, tie bars precoated with anticorrosive epoxy paint of 12mm dia.70cms. long and at 30.00cm.C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete. |
| 49 | Item No. 43:- Providing and laying 125micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete. |
| 50 | Item No. 44:- Providing and fixing in position TMT FE 500, 32mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. |
| 51 | Item No. 45 :- Cutting transverse contraction joints 3to4mm wide and depth 60mm. in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay/slab etc. complete including subsequent widening of the groove 8 to 10mm. wide at top having depth of 15 mm. as directed by Engineer incharge. |
| 52 | Item No. 46 :- Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5mm thick including 1.5 Refractive index reflectorizing glass beads @250gm/sqm. Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be >250mcd/sqm/lux measured in the initial 7days and sustained reflectivity RL of 100mcd/sqm/lux and Qd of 100mcd/sqm/lux measured at the end of 2 years by means of a Standard Reflecto meter of Zehntner,Easy lux,Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5.The finished surface to be level,uniform,and free from streak sand holes complete as per direction of Engineer-in-charge and in ccordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). |
| 53 | Item No. 47 :- Providing and applying epoxy bonding agent for bonding old to new concrete for structural members prior applying the epoxy mortar to the concrete surfaces etc complete. |
| 54 | Item No. 48 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 55 | Item No. 49 : Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 56 | Item No.50 : Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5-3.00 m.) |
| 57 | Item No. 51:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete |
| 58 | Item No. 52:- Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. |
| 59 | Item No. 53: Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand . |
| 60 | Item No. 54 : Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 61 | Item No. 55 : Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 62 | Item No. 56 : Providing and laying Cast insitu/Ready Mix cement concretein M-30 of trap /granite /quartzite /gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enable dreversible Drum Type mixer/concrete Batch mix plant(Panmixer)etc.complete.With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) |
| 63 | Item No. 57 : Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. |
| 64 | Item No.58 : Providing and laying Cast in situ/Ready Mixcement concrete M25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 65 | Item No. 59 : Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 66 | Item No. 60: Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.Complete |
| 67 | Item No. 61: Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. |
| 68 | Item No. 62: Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 69 | Item No. 63: Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 70 | Item No. 64: 'Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 71 | Item No. 65: Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 72 | Item No. 66: Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. |
| 73 | Item No. 67: Providing and laying vitrified stone effect finish tiles having size 590 to 605mm x 590 to 605mm of 8 to10mm thickness and confirming to IS. 15622-2006 (GroupBla) of approved make, shade and pattern for flooring in required position laid on a bedof1:4 cement mortar including required position laid on a bedof1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete |
| 74 | Item No. 68: Providing and laying vitrified rustic matt stone finish tiles having size 590mm to 605mm x 590mm to 605 mm to 8 to 10mm thickness and confirming to IS.15622-2006 (Group Bla)of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cementmortar including neat cement float, filling joints, curing and cleaning. etc. complete. |
| 75 | Item No. 69: Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite/Amba White/Catbarybrown/RBIred/OceanBrown granite stone partition with full moulding the edges etc. complete . Both side polish |
| 76 | Item No. 70: Providing and laying telephone black / Amba White /Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. |
| 77 | Item No. 71: Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 78 | Item No. 72: Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 79 | Item No. 73: Providing and fixing inposition (asper1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram / One Running Metre.with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram/One Running Metre..Top and side track section 92 x 31.75 x1.30mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom40 x 18 x 1.25mmatweight0.417Kilogram/OneRunningMetre. Inter lockingsection 40 x18 x1.10mmat weight 0.469 Kilogram/Running metre and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminiummosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box |
| 80 | Item No. 74: Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25mm thick panels with openable fan light as per detailed drawings.Excluding the door frame 60mm x100mm stainless steel fixtures and fastening and finishing the wood work with oil painting3coats. (Excluding the door frame) |
| 81 | Item No. 75: Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. |
| 82 | Item No. 76: Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. |
| 83 | Item No. 77: Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. |
| 84 | Item No. 78: Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 85 | Item No. 79: Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 86 | Item No. 80: Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 87 | Item No. 81: Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 110 mm dia. in any position including all fittings and accessories,making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories). |
| 88 | Item No.82: Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 89 | Item No. 83: Providing and fixing White glazed with bottle trap earthen ware Wash Hand Basin of 63 x 45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap up to the outside face of the wall, making good the damaged surface, testing etc. complete. |
| 90 | Item No. 84: Providing and fixing15mm diameter PVC aqua craft type supreme makeor equivalent makesuper jet spray with flange 2 in 1 faucet 1.50m long incl. all accessories etc. complete. |
| 91 | Item No. 85: Providing and fixing white glazed urinal of size 710 x 460 x 300 mm with sensotronic concealed type flushing valve for urinal with complete kit having fitings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete. |
| 92 | Item No. 86: Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 93 | Item No. 87: Providing and laying 100 mm dia. half round white glazed earthenware pipes in 1:5:10 cement concrete bedding including bends, etc. complete. |
| 94 | Item No. 88: Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 95 | Item No. 89: Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. |
| 96 | Item No. 90: Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. |
| 97 | Item No. 91: Providing and applying two coats of exterior acrylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 98 | Item No. 92: Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). |
| 99 | Item No. 93: Providing and fixing machine cut mirror polished 18mm to 20mm thick telephone black/Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. One side polish |
| 100 | Item No. 94: Providing and fixing Mangalore tiled roofing with class 'AA' tiles including securing the last course of tiles near theeaves with steel flat 40mm x 3mm and 1.22mm wire fixing 50mm x 25 mm horizontal teak wood battens and iron works and oiling the battens etc. complete. (Excluding ridge and hip tiles). |
| 101 | Item No. 95: Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete. |
| 102 | Item No. 96:- Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. |
| 103 | Item No.97:- Designing (aesthetically) and constructing RCC elevated service reservoirs of capacity 1,50,000 liters with reinforced cement concrete 12metre staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to cetre for ESR having capacity upto 500 cubic metre and not more than 6 metre centre to centre for ESRs having capacity above 500 cubic metre including excavation in all types of strata, foundation cancrete cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 metre, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as mild steel ladder, cast iron manhole conductor, galvanised iron pipe railing around walk way and top slab level, mild steel grill gate of 2 Metres height with locking arrangement of approved design, burnt brick masonary chambers for all valves, ventilating shafts, providing and applying htree coats of cement paint to the structure including roof slab epoxy painting to internal surface and anti termite treatment for underground parts of the structure, and giving satisfactory water tightness test as per Indian Standard (I.S.) code the job to include painting the name of the scheme and other detaills on the reservoir as per the directions of engineer in charge.MJP Section - 1 RCC ESR I/P - K2- 20) / 279, S.R -2023-24 |
| 104 | Item No.98:- HDPE Pipes (8.0 kg/sqcm); 160 mm dia. Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.As per IS:4984-2016, the pipes upto 110 mm dia.should be supplied in coil form only. |
| 105 | Item No.99:- Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. HDPE Pipes (8.0 kg/sqcm); 160 mm dia. |
| 106 | Item No.100:- Distribution System: HDPE Pipes (8.0 kg/sqcm); 110 mm dia. Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.As per IS:4984-2016, the pipes upto 110 mm dia.should be supplied in coil form only. |
| 107 | Item No.101:- Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. HDPE Pipes (8.0 kg/sqcm); 110 mm dia. |
| 108 | Item No.102:- Distribution System: HDPE Pipes (8.0 kg/sqcm); 75 mm dia. Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.As per IS:4984-2016, the pipes upto 75 mm dia.should be supplied in coil form only. |
| 109 | Item No.103:- Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/ butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. HDPE Pipes (8.0 kg/sqcm); 75 mm dia. |
| 110 | Item No.104:- Supplying and erecting minimum Three & above star rated submersible pump set of 3.75 KW/5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 440 to 900 LPM discharge at 37 to 10 m head & discharge & delivery pipe of Size-75 mm diameter with a necessary H type clamps as per specification No. WP-SMP |
| 111 | Item No.105:- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position..160 mm dia. |
| 112 | Item No.106:- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 110 mm dia. |
| 113 | Item No.107:- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 75 mm dia. |
| 114 | Item No.108:- Supplying and erecting PVC trunking (PVC casing-n- capping) of size 25 mm with accessories on wall/ceiling. |
| 115 | Item No.109:- Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. |
| 116 | Item No.110:- Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. |
| 117 | Item No.111:- Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 118 | Item No.112:- Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories. |
| 119 | Item No.113:- Point wiring for ceiling fan in PVC trunking (casing- capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories. |
| 120 | Item No.114:- Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories. |
| 121 | Item No.115:- Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. |
| 122 | Item No.116:- Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position. |
| 123 | Item No.117:- Supplying and fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. |
| 124 | Item No.118:- Supplying, erecting and marking SPMCB 6A to 32A, B- series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board. |
| 125 | Item No.119:- Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame. |
| 126 | Item No.120:- Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe. |
| 127 | Item No.121:- Supplying and laying (including excavation) of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 128 | Item No.122:- Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results. |
| 129 | Item No.123:- Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. |
| 130 | Item No.124:- Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected. |
| 131 | Item No.125:- Supplying, installing, testing and commissioning of 10 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 30 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB, MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract. |
| 132 | Item No.126:- MSEDCL Electrical billing meter liasoning charges with load extension. Complete procurement and installation at the provided meter board/panel with incoming and outgoing connection (Including firm quotation charges of MSEDCL Inspection & Testing). |
| 133 | Item No.127:- Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. |
| 134 | Item No.128:- Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 135 | Item No.129:- Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiringconnections complete. |
| 136 | Item No.130:- Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 137 | Item No.131:- Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 138 | Item No.132:- Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected. |
| 139 | Item No.133:- Supplying and erecting PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected. |
| 140 | Item No.134:- Supplying and erecting LED square / circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 141 | Item No.135:- Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. |
| 142 | Item No.136:- Supplying and erecting storage type water heater 50 litres capacity having standing loss <0.675 kWh/24hour/45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal cut-out, function valve) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. |
| 143 | Item No.137:- Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia). |
| 144 | Item No.138:- Providing fiber reinforced PVC flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1 set of 2 nos.) complete. |
| 145 | Item No.139:- Supplying, erecting and marking SPMCB 6A to 32A, C- series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board. |
| 146 | Item No.140:- Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame. |
| 147 | Item No.141:- Supplying & erecting Minimum three & above star rated Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 1.125 kW/1.5HP with discharge 198/50 Litres per Minute (LPM)) for head of 15/37.5 m & 40 mm suction/ 32 mm delivery pipe on provided C.C. foundation. |
| 148 | Item No.142:- Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. |
| 149 | Item No.143:- Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board. |
| 150 | Item No.144:- Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty. |
| 151 | Item No.145:- Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe. |
| 152 | Item No.146:- Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete. (excluding luminaries) |
| 153 | Item No.147:- Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete. |
| 154 | Item No.148:- Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results. |
| 155 | Item No.149:- Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast). |
| 156 | Item No.150:- Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe. |
| 157 | Item No.151:- Supplying and erecting integrated LED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty. |
| 158 | Item No.152:- Supplying & erecting three phase, 415V, street light control panel up to the max load of 12kW, TPN MCB 63A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 159 | Item No.153:- Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe. |
| 160 | Item No.154:- Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results. |
| 161 | Item No.155:- Supplying and erecting FRP box of size 250mm x 200mm x 100 mm, 2.7 mm thick complete on pole/wall. |
| 162 | Item No.156:- Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation. |
| 163 | Item No.157:- Supplying, erecting and marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board. |
| 164 | Item No.158:- Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball. |
| 165 | Item No.159:- Supplying & erecting crimping type copper lugs for cable up to 16 sq mm complete. |
| 166 | Item No.160:- Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads. |
| 167 | Item No.161:- Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. |
| 168 | Item No.162:- Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). |
| 169 | Item No.163:- Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. |
| 170 | TOTAL AMOUNT OF PART A |
| 171 | PART-B: CHARGES |
| 172 | Item No 164:-. Calculate Quality Control Tests |
| 173 | CONCRETE |
| 174 | Compressive Strength OF C.C. Cube(Set of 3 cubes). |
| 175 | Concrete Mix Design For M25, M30 & M40 (With all Tests on basic materials) |
| 176 | REINFORCEMENT STEEL BARS |
| 177 | Upto 16mm (set of 3 bars)(Tensile strength, % Elongation, Yield stress, Weight-Per Meter, Bend / Rebend Test, Proof Stress.) |
| 178 | Above 16mm (set of 3 bars) (Tensile strength, % Elongation, Yield stress, Weight-Per Meter, Bend / Rebend Test, Proof Stress.) |
| 179 | RUBBLE |
| 180 | Crushing value/Compressive strength, Water Absorption & Specific Gravity. |
| 181 | AGGREGATES |
| 182 | Water Absorption, Specific Gravity, Impact value/ Crushing Value. |
| 183 | GSB Mix Design./Cement Treated Sub Base ( CTSB) |
| 184 | BRICKS |
| 185 | Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). |
| 186 | MANGALORE TILES |
| 187 | Water Absorption (Set of 6 Tiles), Flexural test (Set of 6 Tiles). |
| 188 | Permeability |
| 189 | BITUMEN |
| 190 | Penetration, Softening Point, Flash & Fire Point, Specific Gravity |
| 191 | Viscosity |
| 192 | Ducility / Elastic Recovery |
| 193 | B. M. Mix Design with all Tests on aggregate (Excluding bitumen ) ( Testing of Bitumen shall be seperately Charged) |
| 194 | CERAMIC/VITRIFIED TILES |
| 195 | Water Absorption, Modulus of Rupture (Set of 6 Tiles) |
| 196 | Item No 165:- . Royalty Charges for Rubble/Murrum Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender