Tender For Construction Of For The Technical Dissemination/ Training Hall For Farmers , Storage Facillity For The Seed & Machinary Internal Path 3.0 Feet Wide In 10 Kanal Area With Conc & Tille ,Approach Road With Tille Work 500 Feet & Construction O
Tender Value
84 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
1.68 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of For The Technical Dissemination/ Training Hall For Farmers , Storage Facillity For The Seed & Machinary Internal Path 3.0 Feet Wide In 10 Kanal Area With Conc & Tille ,Approach Road With Tille Work 500 Feet & Construction Of Main Gate With Main Board At Govt Fruit Plant Nurssary At Siot Panchayat Siot Block Siot Distt Rajouri Under Scheme Capax-Sacs Year 2026-27 E.Cost 84.00 Lac
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means over area exceeding 30cm in depth 1.5m in width as well as 10sqm on plan including disposal of excavated earth. AKOS. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: A.K.O.S |
| 3 | P/L stone solling hand packed including supply of stone. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Supply and placing of stone in plumb conc |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more (To be paid as per actual). |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 11 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 13 | Columns, pillars, piers, abutments, posts and struts. |
| 14 | Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 15 | Suspended floor |
| 16 | edges of slab |
| 17 | Providing and laying 12 mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 18 | Providing and laying 6 mm Cement plaster on the rough side of single or half brick wall of mix:1 : 3 ( 1 cement : 3 fine sand) |
| 19 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.Size of tile 300x300mm |
| 20 | Providing and laying Ceramic glazed floor tiles 600x600 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown |
| 21 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarsesand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. |
| 22 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 23 | Providing and laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 24 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick. |
| 25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 26 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 27 | Fininhing walls with acrylic smooth wxterior paint of required shade on new work including priming coat of exterior primer |
| 28 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 29 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade.Two or more coats on new work |
| 30 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood |
| 31 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm thick. |
| 32 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood |
| 33 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood |
| 34 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angles 40x40x6mm for diagonal braces |
| 35 | Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc. |
| 36 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 38 | Providing and fixing white vitreous china padestrial type water closet (eurpian type ) including all necessary fitting |
| 39 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm |
| 40 | providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap |
| 41 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size600x450x250 mm |
| 42 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plasticnmoulded frame of approved make and shade with 6 mmthick hard board backing Rectangular shape 453x357 mm |
| 43 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. Complete |
| 44 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms |
| 45 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 46 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4graded stone aggregate 20 mmnominal size) finished with a floatingcoat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 47 | Providing and fixing soil, waste and vent pipes : 18.35.1 100 mm dia. |
| 48 | P/Fixing floor trap |
| 49 | Provision for electification including complete wiring for , light point,fan point,exhaust fan point call bell point,with modular switches,modular plates, GI boxes, main board,earthing the point ,celing fans1200mm sweep, led tube light,stablizer 10kvamp, invetor and cctv camers completer job |
| 50 | Providing and laying checquered precast cem conc tille 5 mm thick 22 sqm laid on 20 mmthick bed of cem mortar with 1:4 mix cem /sand |
| 51 | Providing and laying 60 mm thick factory made cem conc inter lock paver blocck of M-30 grade mix made by block macking machine laid on 60 mm thick bed fine sand |
| 52 | Providing and laying 50 mm thick cem conc flooring 1:2:4 mix |
| 53 | Providing and Fixing steel work in buil up tublar round ,squre or rectangular hollow tubes etc & applying priming coat of steel primer |
| 54 | Providing and Fixing pre coated galvinized iron profile sheet (size ,shape & pitch of corrugation as approved by engg incharge )0.50 mm thick total coated thickness with zinc coating 120 gm /sqm as per IS277 In240 MPA Steel grade 5 & 7 microns PPOXY Primer of both side of the sheet & polyester top coat 15 to 18 micron .sheet should have propectiveguard film of 25 micron etc |
| 55 | Providing and Fixing pre coated galvinized steel sheet roofing accessories 0.50 mm thick (Ridges plain 500 to 600 mm thick ) |
| 56 | Providing and Fixing pre coated galvinized steel sheet roofing accessories 0.50 mm thick (Barge board up to 300 mm ) |
| 57 | Supplying and fixing of rolling shutters of approved make ,made of required size of mild steel laths ,inter locked to gether through their entire length & jointed together at the end by end locks ,mounted on specially designed pipe shaphed with brackets guides & arrangements for inside & out side locking with push and pull operation complete ,including the cost of providing & fixing necessary 27 .5 cm long wire springs manufacture from sigh tensile steel wire of adequte strength conforming to IS 4454 Part-1 & MS top cover of required thickness or rolling shutters . |
| 58 | Carrige Of Fine Sand for an avg distt of 50 Km by MT |
| 59 | Carrige Of Fine Sand for avg distance10 Km by MT |
| 60 | Carrige Of Agg for an avg distance of 10 Km by MT |
| 61 | Carrige Of stone for an avg distance of 500 mtr by hl |
| 62 | Carrige Of Brick for an avg distance of 15 Km by MT |
| 63 | Carrige Of Cement for 10 Km by MT |
| 64 | shifting of malva( excavated earth) for an average distance of 1km by MT |
| 65 | P/F main gate/ main board Finshing with granite & electronic main board etc |
| 66 | Add cost of sign board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender