Tender For Renovation Of Rbi Officers Flats At Sector 30A, Chandigarh
Tender Value
62.52 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
3 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Rbi Officers Flats At Sector 30A, Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | DISMANTLING WORKS:(Each Flat have two bedroom with attached toilets and WC, one servant room with attached toilet and WC,Kitchen, Drawing Room, dining hall, Front and Back Courtyard and Common handwash area in Back Courtyard. Bidder is strictly advised to visit the flat under consideration for scope and quantum of dismantling and quote his rates accordingly. The debris shall be disposed off at the authorised dumping yard of the Chandigarh Administration and stacking of serviceable material/Scrap having Salvage value and it shall be removed from premises and pay the Bank under Item of Rebate).DISMANTLING OF PLUMBING AND SANITARY FITTINGS:- Carefully Dismantling all plumbing and sanitary fittings in the flat (bath,WC,Toilet, kitchen and common handwash Area) including G.I. and C.I. pipes along with Fittings, medicine chest, soap dish, sink, wash basins, taps, high level/low level flush tank with bracket, floor traps, Jali, Rods,cloth drying batten, including stacking the salvage items at place directed and disposing off the debris out of the premises at local administration authorised dumping yard, etc complete as directed by Bank's Engineer. DISMANTLING OF BATH, WC, COMMON AREAS:- Carefully dismantling the flooring, skirting and wall dado of Vitried or Ceramic Tiles/ mosaic/any stone/ tiles/ IPS/Kota Stone along with backing, bedding upto required depth, cleaning with chisel,removing window / ventilator shutters only for Refixing /repair/replacement after painting and fixing of hardware fittings and/or glass, removing the MS grill of the window/ventilator/fixed window for repainting and refixing the MS grill including making good the damages, stacking the salvage items at place directed and disposing off the debris out of the Bank's premises at local administration authorised dumping yard, making good the damages to the walls, floors,etc., with cement mortar(1 cement : 4 sand) or plain cement concrete (1 cement : 2 sand : 4 aggregate) as directed by the Bank's Engineer-in-Charge. Dismantling of Doors along with frame for Toilet/WC area shall be done by carefully cutting the MS Frame without damaging the masonry. The holdfast shall not be removed from the wall and shall be cut to dismantle the frame)DISMANTLING OF KITCHEN:- Carefully dismantling the portion of existing kitchen platform after carefull removing the Shutter, dismantling the Kitchen sink,dismantling the floor tile wall dado with backing, stone/kadapa slab with concrete slab surface,,removing window / door / ventilator shutters only for Refixing /repair/replacement after painting and fixing of hardware fittings and/or glass, removing the MS grill of the window/ventilator/fixed window for repainting and refixing the MS grill including stacking the salvage items at place directed and disposing of the debris out of the Bank's premises at local administration authorised dumping yard, making good the damages to the walls, floors,etc., with cement mortar(1 cement : 4 sand) or plain cement concrete (1 cement : 2 sand : 4 aggregate) as directed by the Bank's Engineer-in-Charge. WORK IN OF ROOMS AND BALCONIES (DRAWING ROOM, DINING ROOM, BEDROOMS and STORE ROOM ETC.):-Carefully dismantling the flooring and skirting of vitrified tiles/mosaic/any stone/ tiles/ IPS along with backing, bedding upto required height, cleaning with chisel to expose base surface of floor slab plaster, dismantling POP Moulding at ceiling, ,removing window / door / ventilator shutters only for Refixing /repair/replacement after painting and fixing of hardware fittings and/or glass, removing the MS grill of the window/ventilator/fixed window for repainting and refixing the MS grill including making good the damages, stacking the salvage items at place directed and disposing off the debris out of the Bank's premises at local administration authorised dumping yard, making good the damages to the walls, floors,etc., with cement mortar(1 cement : 4 sand) or plain cement concrete (1 cement : 2 sand : 4 aggregate) as directed by the Bank's Engineer-in-Charge. Note:- Please refer the enclosed drawing for quantity pupose .(Unit of Measurement is Each Flat) |
| 2 | DISMANTLING Half/Full BRICKWORK Including PLASTER of the both the surface :Demolishing brick work in partition wall/supporting wall manually/ by mechanical means and disposal of debris out of the Bank's premises at local administration authorised dumping yard, etc. complete as directed. |
| 3 | WATERPROOFING WORK :- Water proofing treatment in Bath, WC, wash basin and sink area Providing and laying water proofing treatment in sunken portion slab of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.75 kg/sqm mixed with SBR based water proofing compound @ 0.5 kg/sqm i.e. for each sqmt of surface for the mix of 0.5 kg of SBR and 0.75 kg of cement. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.75 kg/sqm mixed with SBR based water proofing compound @ 0.5 kg/sqm i.e. for each sqmt of surface for the mix of 0.5 kg of SBR and 0.75 kg of cement. This layer will be allowed to air cure for 48 hours.(c) Third layer of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with SBR based water proofing compound in recommended proportion (7.5 kg of SBR foe each bag of cement) including making slope, rounding off junction of vertical and horizontal surface.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.Ponding test with water depth of 50 mm for 48 hours for the work, is to be carried out by flooding the area after blocking all the draining point. Contractor shall submit the gurantee certificate for at least 5 years from the date of vitual completion of work in the prescribed format. |
| 4 | Brick bat coba: Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand) admixed with water proofing compund conforming to IS: 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls including rounding of junctions of walls and slabs. |
| 5 | PLASTERING : Average 15 mm average thick cement plaster on walls of sunken portion in cement mortar 1: 4 (1 cement : 4 medium sand), mixing integral water proofing compound in cement plaster work in proportion recommended by the manufactures, curing of new plaster etc., complete as directed. |
| 6 | PCC:-Providing and laying cement concrete 1:1.5:3 (1 Cement :1.5 Coarse Sand : 3 graded stone aggregate 20 mm nominal size ) for any kind of work at any level including mixing, laying, compacing, and shuttering curing etc complete. |
| 7 | BRICK WALL:Providing & constructing half brick wall in cement mortar 1:4 (1 Cement : 4 coarse Sand) at all levels, using best quality locally available bricks including providing band using 2 nos. 8 mm dia tor steel reinforcement at every fifth layer , making key with adjoining stone/brick masonry wall, as per site requirement including racking out joints,curing etc., all complete as directed by Bank's Engineer. |
| 8 | PLASTERING:- Average 12 mm thick (or match the adjacent plaster) cement plaster in CM 1:4 (1 Cement : 4 fine Sand) to walls,columns, ceiling, beams, etc., in line and level , curing of new plaster,etc., complete as directed. |
| 9 | Repair of Plaster for Shovel and Plumb: Cement Plaste with cement mortar 1:3 ratio (1 cement : 3 coarse sand) for making wall surface in true plumb and at right angle to adjacent wall with average required thickness of 15 mm asper site requirement to match the level so that wall tile to be fixed on the wall in the relevant items of work, can be fixed in true line, level , plumb and at right angle to adjecent wall or the surface to be finished for receiving putty etc. in true line, level , plumb. The work also includes chipping the excess wall if require plaster so that new plaster with minimum thickness can to be laid on the wall all complete as direction of Bank's Engineer. |
| 10 | WATER SUPPLY :- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 15 mm nomial dia with fittings in Concealed work, including cutting chases and making good the walls etc, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge |
| 11 | WASTE WATER :- Providing, jointing, testing and fixing 75 mm diameter UPVC Soil, Waste & Vent system conforming to IS : 13592 - Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offSet and other specials. Jointing shall be done with pushfit EPDM ring jointing technique in general. Solvent cement joints may be provided for fittings and specials which are not manufactured with pushfit rubber joints. Pipes may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased with 75 mm thick cement concrete (1:2:4) all around. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. |
| 12 | WASTE WATER :- Providing, jointing, testing and fixing 100 mm diameter UPVC Soil, Waste & Vent system conforming to IS : 13592 - Type B and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offSet and other specials. Jointing shall be done with pushfit EPDM ring jointing technique in general. Solvent cement joints may be provided for fittings and specials which are not manufactured with pushfit rubber joints. Pipes may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased with 75 mm thick cement concrete (1:2:4) all around. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. |
| 13 | Providing and fixing PVC floor trap of size 100 mm inlet and 75 mm outlet and minimum 50 mm water seal of approved make including cost of cutting and making good the walls and floors. |
| 14 | VITRIFIED TILE FLOORING :- VITRIFIED TILE FLOORING IN HALL , BED ROOM & LOBBY :- Providing and laying vitrified floor tiles in 800 X 800 mm size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make & shade , laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of tile - 800 X 800 mm. (Basic rate of Tile = Rs. 650/- per sqm Excluding CP & GST) |
| 15 | VITRIFIED TILE FLOORING IN BATH,WC, TOILET AND IN COVERED AREA IN BACKYARD AND FRONTYARD:-Providing and laying Anti Skid vitrified tiles of size 600x600 mm (thickness to be specified by the manufacturer), of premium quality conforming to IS : 15622, of approved make & shade laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand),including pointing the joints with white cement and matching pigment etc., complete. (Basic rate of Tile = Rs. 600/- per sqm Excluding CP & GST) |
| 16 | VITRIFIED TILE FLOORING IN KITCHEN :-Providing and laying vitrified tiles of size 600x600 mm or other approved size (thickness to be specified by the manufacturer), of premium quality conforming to IS : 15622, of approved make & shade laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand),including pointing the joints with white cement and matching pigment etc., complete. (Basic rate of Tile = Rs. 600/- per sqm Excluding CP & GST) |
| 17 | VITRIFIED TILE FLOORING IN OTS(OPEN TO SKY) AREA IN BACKYARD AND FRONTYARD:-Providing and laying ATLEAST 20 MM THICK HEAVY DUTY Anti Skid vitrified tiles of size 600x600 mm of premium quality of approved make and shade laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand),including pointing the joints with white cement and matching pigment etc., complete. (Basic rate of Tile = Rs. 800/- per sqm Excluding CP &GST) |
| 18 | VITRIFIED TILE IN DADO / SKIRTING :- Providing and fixing premium quality glazed vitified tiles of size 600x1200 mm conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved size , shade and thickness by Engineer-in-Charge, in dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Bank may approve different Shades, Colour and pattern of tile for Each of the location/ Area. Bidder is strictly advsed to consider the while quoting the rates.(Basic rate of Tile = Rs. 700/- per sqm Excluding CP & GST) |
| 19 | VITRIFIED TILE SKIRTING IN HALLS , BED ROOMS & CORRIDOR:- Providing and laying Vitrified tiles in 800 mm X 800 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved size , shade and thickness in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of tile - 800 X 800 mm. (Basic rate of Tile = Rs. 650/- per sqm Excluding CP & GST) |
| 20 | VITRIFIED TILE SKIRTING IN COVERED AND OTS AREA IN BACKYARD AND FRONTYARD:- Providing and laying Vitrified tiles in 600 mm X 600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved size , shade and thickness, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of tile - 600 X 600 mm. (Basic rate of Tile = Rs. 600/- per sqm Excluding CP & GST) |
| 21 | KITCHEN AND WASH BASIN COUNTERTOP :- Kota Stone Support for kitchen platform: Providing and fixing 20 mm thick Kota stone of required length and width gang saw cut,semi- polished, machine cut for base of kitchen platforms below the granite counter slab and for bearing with adjucent wall,vertical supports for platform & shelves, basin counters, window sills, facias and similar locations, of required size, approved shade, texture, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and semi-polishing to edges etc. complete at all levels. (The rate should include for making necessary cutout to fit wash basin, sink, plumbing faucets, LPG hose pipe etc. |
| 22 | Providing and fixing 15-16 mm thick (with maximum available length in market) mirror polished jet black or any other approved colour granite stone slabs on kitchen platform including facia of platform, shelves etc. on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding, grouting, joints with polymer cement grout or white cement slurry mixed with polymer and matching pigment, cleaning, curing. The rate shall include for hacking existing surfaces, making hole for gas pipe in platform area, making full round mirror polished moulding on all free / exposed edges including wastage etc. all complete as directed by Bank's Engineer. (Basic Rate of Granite = Rs 2500/- per sqmt excluding CP &GST) |
| 23 | Providing and fixing 15 mm full body tiles of size 800mm X 2600mm (the width of platform will be approximately 600 mm. Only plan area of platform will be measured for payment, Bidder is strictly advied to consider the wastage while quoting the rates)) for wash basin counters, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, The rate shall include for hacking existing surfaces, making hole for facucets in platform area, making full round mirror polished moulding on all free / exposed edges including wastage etc. all complete as directed by Bank's Engineer. (Basic Rate of full body tile = Rs 2800/- per sqmt excluding CP & GST) |
| 24 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work/Full Body tile, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 25 | Providing and fixing kitchen sink with drain board including Joint filling, fixing and making good the adjacenet masonry wherever required all complete as directed. (Basic rate of Kitchen sink with drain board = Rs. 8000/- each excluding CP & GST) |
| 26 | SANITARY & PLUMBING WORK :- Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.(Basic Rate of Indian WC with P.V.C. flushing cistern and pipe = Rs. 2700/- each exluding CP & GST) |
| 27 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.(Basic Rate of Single piece WC including seat cover = Rs. 8200/- each exluding CP &GST) |
| 28 | Providing and fixing Premium quality white vitreous chinaware of rectangular/oval/circular shaped counter top Wash Basin fixed over the counter using silicon adhesive or epoxy glue. The work includes installation of 32mm and 300mm long C.P. Bottle Trap, 32 mm brass waste coupling/grid drain, Single control basin faucet in polished chrome, 2 nos angle valve (will be paid extra), braided pipe (will be paid extra) for each angle valve and other ancillary fittings, cutting and making good the walls wherever required including connecting the same with the drain pipes to discharge the water from the floor as per direction of engineer.(Basic Rate of Over the counter washbasin = Rs. 4300/- each exluding CP &GST)(Basic Rate of basin faucets = Rs. 3900/- each exluding CP &GST)(Basic Rate of Bottle Trap = Rs. 1300/- each exluding CP &GST)(Basic Rate of Grid drain/ Waste coupling = Rs. 430/- each exluding CP &GST) |
| 29 | Providing and fixing vitreous chinaware wash basin with pedestal (completely recessed at the back for the reception of pipes and fittings.) of approved quality and make,including necessary fixing arrangement, providing and fixing semi rigid PVC waste pipe of 32 mm dia, cutting and making good the walls wherever required.(Basic Rate of washbasin with Pedestal = Rs. 2400/- each exluding CP &GST)(Basic Rate of basin faucets = Rs. 2200/- each exluding CP &GST)(Basic Rate of Grid drain/ Waste coupling = Rs. 430/- each exluding CP &GST) |
| 30 | Providing and fixing wall mixer with hand held shower assembly( hand shower with bracket and flexible tube) and wall mounted overhead shower rose and shower arm all complete with ancillary fittings as per the directions of the Bank's engineer. (Basic price of wall mixer=Rs. 4900/- each excluding CP &GST)(Basic price of Hand shower with bracket and flexible tube=Rs. 2600/- each excluding CP &GST)(Basic price of overhead shower rose with arm = Rs. 2750/- each excluding CP &GST) |
| 31 | Providing and fixing 100 mm size square/circular floor drain /SS jali of approved make as per manufacturer's specifications and directions of the Bank's engineer. (Basic Rate of Floor drain = Rs. 165/- each excluding CP &GST) |
| 32 | Providing and fixing C.P. brass Soap Dish Heavy quality of approved make as per manufacturer's specifications and directions of the Bank's engineer.(Basic Rate of Soap Dish = Rs. 750/- each excluding CP &GST) |
| 33 | Providing and fixing C.P. brass Tooth brush holder of approved quality.(Basic Rate of tooth brush holder = Rs. 500/- each excluding CP &GST) |
| 34 | Providing and fixing C.P. Toilet Paper holder of approved quality.(Basic Rate of Toilet Paper holder = Rs. 450/- each excluding CP &GST) |
| 35 | Providing and fixing C.P. brass Towel ring of approved quality. (Basic Rate of towel ring = Rs. 750/- each excluding CP &GST) |
| 36 | Providing and fixing C.P. brass Towel Rail/Rod of approved quality. (Basic Rate of towel Rail/Road = Rs. 950/- each excluding CP &GST) |
| 37 | Providing and fixing Set of of Corner glass shelf and centre glass with edges round off supported with C.P. brass brackets fixed with screws, rawl plugs etc., complete.(Basic Rate of Glass Shelf set = Rs. 2000/- each set excluding CP &GST) |
| 38 | Providing and fixing two way bib cock with health faucet of approved make and model.(Basic rate of set of Two way bib cock with health faucet=Rs.2800/- each set excluding CP &GST) |
| 39 | Providing and fixing 15mm nominal bore C.P. brass stop cock (both concealed and exposed part ) of standard design and of approved make.(Basic rate of stop cock both concealed and exposed part = Rs. 1260/- for both exposed and conceled part excluding CP &GST). |
| 40 | Providing and fixing 15mm nominal bore C.P. brass angle valve of standard design and of approved make.(Basic rate of angle valve = Rs.1000/- each excluding CP & GST). |
| 41 | Providing and fixing Kitchen Sink mixer tap of 15mm nominal bore with swinging casted spout wall mounted concealed type of approved make for Kitchen sink.(Basic rate of Sink mixer with connecting legs and flanges = Rs. 3350/- each excluding CP &GST). |
| 42 | WPC DOOR FRAME FOR TOILET AND WC AREA : - Providing and fixing factory made single extruded WPC (Wood Polymer Composite) Frames/Chowkhat of size 50x125mm for solid door/ window/Celesetory windows & other comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, adequate screw withdrawal strength, and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge. |
| 43 | WPC DOOR SHUTTER FOR TOILET AND WC AREA : - Providing and fixing factory made single extruded 30 mm thick WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer, calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives having minimum density of 650 kg/cum and adequate screw withdrawal strength and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In Charge. |
| 44 | FLUSH DOOR SHUTTER FOR BEDROMS, HALLS ETC : -Providing and fixing ISI marked 30 mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters fixing with brass heavu duty standerd aprroved ball bearing hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge. |
| 45 | Extra for providing lipping with 2nd class teak wood battens 12 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 46 | VENEER PLAIN LINING FOR MAIN DOOR SHUTTER: -Providing and fixing teakply (plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1)) for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture. (Basic rate of 3-4 mm thick teak veneer Rs 900/- Per Sqm excluding CP &GST). |
| 47 | Providing & Fixing 1.00 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality on outer side of existing cupboard shutter.(Basic rate of Laminate=Rs.500/- per sqmt set excluding CP & GST). |
| 48 | Providing Second class teak woodwork in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length all as per direction of Bank's Engineer |
| 49 | Providing and fixing 30 mm thick second class teak wood panelled or panelled and glazed shutters for windows and clerestory windows, fixing with ball bearing hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Ball bearing hinges and necessary screws shall be paid separately) |
| 50 | Providing and fixing 5.0 mm thick glass panes for glazing in glazed shutters of 25 mm to 40 mm thick for windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). The glass panes shall be fixed with the shutter with 2nd class teakwood wooden moulded beading of suitable size. |
| 51 | Providing and fixing S.S 304 grade mosquito mesh of 12 Number (144 apertures per square inch), 24 SWG to the shutter of the existing/new window shutter with suitable size of 2nd class teak wood beading. |
| 52 | Providing and fixing Rim Lock set ((Godrej make Tribolt Ultra XL+ 2C Deadbolt+ with necessary locking arrangement or approved equivalent) of approved make and model to the main door etc. complete as dirceted by Bank's engg.(Basic price of complete lock and fittings = Rs. 2330/- each excluding CP & GST). |
| 53 | Providing and fixing mortise handle with lock body and cylindrical locks of approved make and model (Godrej make NEH 07 200 mm Door Handle Set 1C+Europrofile Cylinder or approved equivalent) to the doors of Bedroom, Dining room, Kitchen etc. complete as dirceted by Bank's engg.(Basic price of complete lock and fittings = Rs. 2760/- each excluding CP & GST). |
| 54 | Providing and fixing mortise cylindrical locks( keyless) of approved make and model (Godrej make Classic Cylindrical Lock Pin Cylinder - Keyles or approved equivalent) to the doors of toilet etc. complete as dirceted by Bank's engg.(Basic price of complete lock and fittings = Rs.585/- each excluding CP & GST). |
| 55 | Providing and fixing brass handle with lacquer polish finish of size minimum 125 mm with brass screws of approved make all complete as directed . (Basic price of handle = Rs. 140/- each excluding GST) |
| 56 | Providing and fixing brass with lacquer polish / lacquer finish tower bolt of approved quality with necessary brass screws for shutter of window complete : 100 mm . (Basic price of tower bolt = Rs. 100/- each excluding CP & GST). |
| 57 | Providing and fixing brass with lacquer polish tower bolt with of approved quality with necessary brass screws for door shutter of toilet complete : 250 mm . (Basic price of tower bolt = Rs. 200/- each excluding CP & GST). |
| 58 | Providing and fixing of brass with lacquer polish / lacquer finish tower bolt of approved quality with necessary brass screws for door shutter of Bedroom,Dining room complete : 300 mm (Basic price of tower bolt = Rs. 250/- each excluding CP & GST). |
| 59 | Providing and fixing of brass with lacquer polish tower bolt of approved quality with necessary brass screws for door shutter of Bedroom,Dining room complete : 300 mm (Basic price of tower bolt = Rs. 250/- each excluding GST) |
| 60 | Providing and fixing S.S. Ball Bearing Hinges of size 75 mm of approved make with nuts and screws etc. complete |
| 61 | Providing and fixing S.S. Ball Bearing Hinges of size 100 mm of approved make with nuts and screws etc. complete |
| 62 | Providing and fixing brass with lacquer polish finish approved make and quality Aldrop of size 250x16 mm with required brass fittings etc. complete (Basic price of brass Aldrop complete set = Rs.540/- each excluding CP & GST). |
| 63 | Providing and fixing approved quality S.S. Safety chain with necessary fixtures for doors.(Basic price of brass Aldrop complete set = Rs. 100/- each excluding CP & GST). |
| 64 | Providing and fixing hanging type door stopper with necessary screws,etc.complete. |
| 65 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated heavy duty brass brackets fixed with screws and PVC sleeves etc., wherever necessary complete 25 mm dia with finials, wall brackets, rod holder, connector, end caps, SS screws and plugs, etc.,wherever necessary complete and as per the sample as approved by the Engineeer-in-Charge. |
| 66 | Providing and applying Wall painting with minimum Two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour over one coat of approved cement primer. |
| 67 | Providing and applying Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on wood & steel work and including priming coat of approved primer (wood or metal primer) including preparation of surface. |
| 68 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge.(Final coat to be done in 1 or 2 layers without gap of time.) |
| 69 | Rebate for taking away the scrap/salvage materials viz. plumbing and sanitary items,carpentary/hardware items,pelmets, tiles or any other scrap items stacked/available out of dismantled works specified in item no. 1 to 3 above except electrical fittings with the approval of the Engineer- in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender