Tender For Provn Of Jaffery Wall And Certain Other B&R Work At Certain Location In Domestic Area At Af Stn Darbhanga Under Ge Af Bihta
Tender Value
44.90 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
5 days left
EMD
89800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darbhanga → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Jaffery Wall And Certain Other B&R Work At Certain Location In Domestic Area At Af Stn Darbhanga Under Ge Af Bihta
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Oct-2026 | BoQ | BOQ | 21-Oct-2026 |
| 2 | 21-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Site clearance in soft/loose soil by removing all kind of vegetation / shrub complete, all as specified. |
| 2 | Excavation in trenches n. exc 1.5 m wide for foundations, laying cables/ pipes etc. not exceeding 1.5 m deep and getting out in SOFT/LOOSE soil complete, all as specified |
| 3 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete, all as specified. |
| 4 | Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified. |
| 5 | Broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete, all as specified. |
| 6 | PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in foundation filling & mass concrete, complete all as specified. |
| 7 | Reinforced cement concrete, type B-1 (1:2:4), using 20 mm graded stone aggregates as in beams, cantilevers, bressumers, lintels over 1.5 metre clear span and the like complete all as specified. |
| 8 | Reinforced cement concrete, type B-1 (1:2:4), using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. |
| 9 | Reinforced cement concrete, type B-1 (1:2:4), using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts complete all as specified. |
| 10 | Providing pre-cast cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in louvres and jallies, 25mm thick ( measured solid) including all mouldings but excluding frame set in cement mortar (1:4) complete all as specified. |
| 11 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with fair finished surfaces of concrete, complete all as specified. |
| 12 | Use & waste of formwork to square or rectangular, sides of pillars, posts, struts, piers, columns and stanchions with fair finished surfaces of concrete, complete all as specified. |
| 13 | Formwork flat to edge of conrete flats, breaks in floors, opening in concrete wall floors and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exceeding 20cm wide complete all as specified. |
| 14 | Brick work using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified. |
| 15 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 16 | Mild steel TMT bars 5 mm and over up to and including 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers and binders complete all as specified. |
| 17 | Mild steel framed work as in doors or wicket gates of angle or other section (hollow section any type, fancy type cast iron ornaments etc) with gusset plates, rails, brace etc complete drilled for fixing of steel sheeting or other covering door to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings ( inclusice of steel sheeting or other covering running rails and guide) and hanging also fastening, confirming to grade Fe-410-W Gde E-250, quality- A complete all as specified. |
| 18 | Glass dividing strips 3mm thick having width size 38mm embedded into PCC complete all as specified. |
| 19 | 100 mm thick PCC type B-1 (1:2:4), using 20 mm graded stone aggregates as in floor and paving & finished cement concrete surface even and smooth without using extra cement complete all as specified. |
| 20 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified. |
| 21 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6), complete all as specified. |
| 22 | Two coats of exterior acrylic emulson over and including a coat of water based exterior primer, including preparation of surfaces, complete all as specified. |
| 23 | Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 28, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender