Tender For special Rep/Replacement Of Control Switch Panels/Lt Panel With Connected Lt Ug Cables And Connected Items At 23 Ed
Tender Value
48.58 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
18 days left
EMD
97500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Rep/Replacement Of Control Switch Panels/Lt Panel With Connected Lt Ug Cables And Connected Items At 23 Ed
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/ loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation of poles, stay, cable, pipes etc and getting out complete all as specified and directed |
| 2 | Excavation in trenches n. exc 1.5 mtr wide and exc 1.5mtr in depth for foundation of pole and getting out in any type of soil complete all as specified and directed. |
| 3 | Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified and directed |
| 4 | Removal of surplus soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed |
| 5 | M&L for PCC ( 1:2:4) type B1 using 20mm graded stone aggregate for coping pedestal for new poles and existing poles . Including necessary form work fair finished to exposed surface complete all as specified and directed |
| 6 | Material and labour for PCC 1:3:6 type C-2 using 20mm graded broken stone aggregate as in mass concrete in foundation of stays , Poles etc complete all as specified and directed. |
| 7 | M&L for Sand cushioning to underground cable 8cm before laying the cable and 15cm (punned down to 18 cm) after laying and stretching the cable complete all as specified and directed. |
| 8 | M/L Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed. |
| 9 | S&F Galvanised pipe 80 mm light grade for mechanical protection for cable/ earthing strip complete all as specified and directed. |
| 10 | S&F Galvanised pipe 50 mm light grade for mechanical protection for cable/ earthing strip complete all as specified and directed. |
| 11 | Supply laying in replacement & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) LT 1100 volt grade with stranded aluminium conductor of size 120 sqmm 3.5 core complete all as specified and directed. |
| 12 | All as per item srl No 11 above but for 95 Sqmm 3.5 Core |
| 13 | All as per item srl No 11 above but for 50 Sqmm 3.5 Core |
| 14 | All as per item srl No 11 above but for 35 Sqmm 3.5 Core |
| 15 | All as per item srl No 11 above but for 25 Sqmm 4 Core |
| 16 | All as per item srl No 11 above but for 16 Sqmm 4 Core |
| 17 | Taking down old unsv cables of any type/size complete all as specified and as directed. |
| 18 | Dismatling of old unsv LTPB/Loop boxes/Timer panels including taking down the demolition of old plain cement concrete complete all as specified and as directed. |
| 19 | Supply.install,testing and commissioning of cubical Out door type LT Electrical distribution feeder pillar box CPRI approved platform mounted factory made totally enclosed dust and vermin proof double shutter front opening with locking arrangement complete made of approx size 2100 mm x 1600mm x 1000 mm thick frame work and 3.15 mm thick CRCA sheet duly painted over outside and inside with detachable sheets with holes for cable glands,separate bus bars,cable entry and exits, panel base of angle iron 50x50x6 mm upto 60 cm height mounted on ground/PCC pillers with bolts grounted complete .The panel comprising of Aluminium bus bars of 1000A capacity,415 volt 50Hz,3 phase 4 wire system with insulators and internal wiring complete accessories with following requirements :-INCOMING:-(i) LT ACB 630 Amps, 50 Ka, micro processor based with over load,short circuit earth fault & instanneous fault protection, draw out type with all fixing arrangements complete - 1 Nos.OUTGOING(i) MCCB adjustable thermal magnetic release type of capacity 250 amps, 4 pole, 25 kA.- 01 Nos.(ii) MCCB adjustable thermal magnetic release type of capacity 200 amps, 4 pole, 25 kA.- 04 Nos. (iii) MCCB adjustable thermal magnetic release type of capacity 160 amps, 4 pole, 16 kA.- 04 Nos.(iv) Indicating Lamp LED Type - 01 set (03 Nos) (v) Multifunction meter digital type -01 No |
| 20 | LT Bus bar chamber cubical out door type weather/dust proof, factory made out of 3.15 mm thick CRCA sheet powder coated with front and back side openable with suitable cable chamber and front side shutters with locking arrangement panel base of angle iron 50x50x6 mm upto 45 cm height for 433 volts, 3 phase, 4 wire system including Four Pole aluminium bus bar 400 amp capacity including control wiring with suitable size of PVC insulated stranded copper conductor and incoming/outgoing connection with aluminium busbar complete as per manufacture design complete mounted or fixed on PCC foundation above 0.45 mtr on floor and cable connection with suitable size of aluminium lugs and glands size of LT Panel 900mmx750mmx450mm complete INCOMING:-(i) MCCB,200 Amp 4 pole, FE Frame,Ics=100% of Icu, 36 KA breaking capacity with adjustable Microprocessor release -01 No(ii) Indicating Lamp LED Type - 01 set(iii) Multifunction meter digital type -01 No |
| 21 | Supply ,Fabricate, install, connect, test and commissioning Busbar chamber, powder coated, outdoor weather proof type, compartmentalised fabricated with 3.15 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for aluminium busbars, separate compartment for switch gear, louvers and air vent for natural air flow, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars complete all as specified and comprising of the followings:- (i) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 400 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps-03 Nos for RYB phases on incoming side. (ii) MCCB fixed thermal magnetic release type of capacity 200 amps, 4 pole, 36 kA.- 1 Nos. (iii) On load change over siwtch 200 Amps ,4 pole 415 volts ,3 phase ,50 Hz AC - 01 NoNote : MCCB shall be front handle operated. |
| 22 | Supply ,Fabricate, install, connect, test and commissioning Busbar chamber, powder coated, outdoor weather proof type, compartmentalised fabricated with 3 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for aluminium busbars, separate compartment for switch gear, louvers and air vent for natural air flow, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars including taking down the old busbar chamber and demolition of old plain cement concrete complete all as specified and comprising of the followings:- (i) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 600 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps-03 Nos for RYB phases on incoming side. (ii) MCCB fixed thermal magnetic release type of capacity 400 amps, 4 pole, 36 kA.- 1 Nos. (iii) On load change over siwtch 400 Amps ,4 pole 415 volts ,3 phase ,50 Hz AC - 01 NoNote : MCCB shall be front handle operated. |
| 23 | Supply.install,testing and commissioning of cubical outdoor LT Electrical distribution feeder pillar box CPRI approved platform mounted factory made totally enclosed dust and vermin proof double shutter front opening with locking arrangement complete made of approx size 1700 mm x 1200mm x 450 mm thick frame work and 3.15mm thick CRCA sheet duly painted over outside and inside with detachable sheets with holes for cable glands,separate bus bars,cable entry and exits, panel base of angle iron 50x50x6 mm upto 60 cm height mounted on ground/PCC pillers with bolts grounted complete .The panel comprising of Aluminium bus bars of 600A capacity,415 volt 50Hz,3 phase 4 wire system with insulators and internal wiring complete accessories with following requirements :-INCOMING:-(i) MCCB adjustable thermal magnetic release type of capacity 400 amps, 4 pole, 36 kA.- 1 Nos. (ii) On load change over siwtch 400 Amps ,4 pole 415 volts ,3 phase ,50 Hz AC - 01 NoOUTGOING(i) MCCB adjustable thermal magnetic release type of capacity 315 amps, 4 pole, 25 kA.- 01 Nos.(ii) MCCB adjustable thermal magnetic release type of capacity 200 amps, 4 pole, 25 kA.- 01 Nos. (iii) Indicating Lamp LED Type - 01 set (03 Nos) (iv) Multifunction meter digital type -01 No |
| 24 | Supply.install,testing and commissioning of cubical indoor type LT Electrical distribution feeder pillar box CPRI approved platform mounted factory made totally enclosed dust and vermin proof double shutter front opening with locking arrangement complete made of approx size 1600 mm x 1550mm x 450 mm thick frame work and 3.15mm thick CRCA sheet duly painted over outside and inside with detachable sheets with holes for cable glands,separate bus bars,cable entry and exits, panel base of angle iron 50x50x6 mm upto 60 cm height mounted on ground/PCC pillers with bolts grounted complete .The panel comprising of Aluminium bus bars of 600A capacity,415 volt 50Hz,3 phase 4 wire system with insulators and internal wiring complete accessories with following requirements :-INCOMING:-(i) MCCB adjustable thermal magnetic release type of capacity 400 amps, 4 pole, 25 kA.- 1 Nos. OUTGOING(i) MCCB adjustable thermal magnetic release type of capacity 200 amps, 4 pole, 25 kA.- 04 Nos. (ii) Indicating Lamp LED Type - 01 set (03 Nos)(iii) Multifunction meter digital type -01 No |
| 25 | Supply.install,testing and commissioning of cubical indoor type LT Electrical distribution feeder pillar box CPRI approved platform mounted factory made totally enclosed dust and vermin proof double shutter front opening with locking arrangement complete made of approx size 1600 mm x 1300mm x 600 mm thick frame work and 3.15mm thick CRCA sheet duly painted over outside and inside with detachable sheets with holes for cable glands,separate bus bars,cable entry and exits, panel base of angle iron 50x50x6 mm upto 60 cm height mounted on ground/PCC pillers with bolts grounted complete .The panel comprising of Aluminium bus bars of 400A capacity,415 volt 50Hz,3 phase 4 wire system with insulators and internal wiring complete accessories with following requirements :-INCOMING:-(i) MCCB adjustable thermal magnetic release type of capacity 250 amps, 4 pole, 25 kA.- 1 Nos.OUTGOING(i) MCCB adjustable thermal magnetic release type of capacity 100 amps, 4 pole, 25 kA.- 06 Nos. (ii) Indicating Lamp LED Type - 01 set (03 Nos)(iii) Multifunction meter digital type -01 No |
| 26 | S&F for LT timer panel made out of 3mm thick CRCA sheet out door kiosk type with sloping canopy on the top finished with epoxy powder coated siemens grey texture finish mounted on 40x40x6 mm angle iron frame and suitable for mounting following items incl taking down unsv complete :- (a) Incoming 100 amps 4 pole 25 Ka MCCB Thermal magnetic release- 01 No (b) Out going - 60 Amps 3 pole power contactor - 01 No (c) Light sensing timer Photosensitive device type 220-240 V AC type, rating 10 Amps(Max) - 01 No (d) Set of (04 Nos) 200 Amps rated Aluminium bus bar mounted on suitable insulators insulated with PVC sleaves and coloured with (Red, Yellow, Blue and Black) CTR and internal wiring with suitable size of PVC insulated copper wire (e) Set of LED Phase Indication lamp (Make- CPRI approved) |
| 27 | Dismantling old unserviceable electrical poles of any type/size incl demolition of PCC work complete and taken on credit complete all as specified and as directed. |
| 28 | Supply and erect steel tubular swaged poles in replacement of old broken PCC Pole complete with cast iron base plate, final taper plug, bolts nuts & screws as specified type 410 SP-31 ( 9 mtr long) erecting in position including two coats of aluminum paint over a coat of red oxide primer complete all as specified/shown on drawing and as directed Note: (i) Excavation Earth work and foundation will be measured and paid seperately under relevent items. |
| 29 | Supply and fixing in replacement thermoplastic outdoor cable junction box hinged/screwed door type of size 200x160x 98 mm for 3 Phase and Nutral incoming cable, 3 Phase and Nutral outgoing cable with terminals and single Phase & Nutral connection for light fitting, 4 pole, 415 volt and one MCB SP 6 Amp, 240 Volt and clamp system (screw less), shock proof safe IP-55, weather proof, rust, dust and water proof internally embedded gasket with provision metric knockouts for cable entry through gland suitable for 16sq mm to 25sq mm cable as required at site complete all as specified & directed. |
| 30 | Supply and fixing in replacement PVC insulated, PVC sheathed, multistranded copper conductor cable 2.5 Sqmm size, 3 core complete all as specified and directed. |
| 31 | Supply and fixing street light mounting bracket made out of GI pipe 40 mm dia light Grade not less than with 1.5 (90cmx60cm) mtr long in any shape including 02 Nos clamps, nuts, bolts, washers etc and painting with aluminium paint,complete all as specified and directed. |
| 32 | Taking down old unsv ftgs of any type/wattage form poles/bldg complete all as specified and as directed. |
| 33 | Supply and fix LED security street light 60 W, made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP66 protection incuding drivers, connecter block etc complete pre wired & suitable bracket complete all as specified and directed. |
| 34 | M&L in replacement of earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI strip of size 32 X 6 mm and 40 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009. complete all as specified and directed. Note :- All joints either strip to strip of strip to earth plate are fixed with welded joints. |
| 35 | M&L in replacement of earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI wire 4mm dia and 40 mm dia bore 7.5 mtr long light grade GI protection pipe for earth wire and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender