Tender For Provn Of Overhead Fiber Sheet Rain Shelter Over The Pathway From P-17 (Guard Room) To P-06 (Ddg Office) At Hq Ddgsi (Nz) And Add / Altn To Bldg No Np-07 (Office Complex) Of 874 At Bn Asc Under Ge (North) Udh Ur.
Tender Value
9.43 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
18 days left
EMD
18860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Overhead Fiber Sheet Rain Shelter Over The Pathway From P-17 (Guard Room) To P-06 (Ddg Office) At Hq Ddgsi (Nz) And Add / Altn To Bldg No Np-07 (Office Complex) Of 874 At Bn Asc Under Ge (North) Udh Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone boulder masonery, built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed. |
| 2 | Demolition of cement concrete (un-reinforeced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:4, complete all as specified and directed. |
| 4 | All as per serial item No 4.00 here-in-above but except bricks. |
| 5 | Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 6 | M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 7 | M&L for 15mm thick rendering on fair faces of brick work / concrete surfaces in CM 1:4 with using water proofing compund and finished the surface even and smooth without using extra cement, complete all as specified and directed.Note :- WPC shall be measured and paid separately under respective item. |
| 8 | Supply only integeral water proofing compound. |
| 9 | M&L for two coats of cement base paint over newly plastered surfaces of walls including one coat of primer and preparing surfaces, complete all as specified and directed. |
| 10 | M&L for 50mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth with using extra cement, complete all as specified and directed. |
| 11 | Dismantling of wrought iron or mild steel work of any decription not otherwise provided for, complete all as specified and directed. |
| 12 | M&L for two coats of synthetic enamel paint on new steel surfaces or previously untreated steel surface over one coat of priming with red oxide zinc chrome of any description over 10cm in width or girth, not otherwise described including preparation of surfaces, complete all as specified and directed. |
| 13 | M&L for preparation of new concrete / plastered surface of any description and applying two coats of synthetic enamel paint over one coat of primer, complete all as specified and directed. |
| 14 | Taking down chowkats or frames (without taking off shutters from frame), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 15 | Taking down chowkats or frames (without taking off shutters from frame), area not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 16 | S&F factory made steel window (box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc. including one shop coat of red oxide zinc chrome primer, complete all as specified and shown in drawings. |
| 17 | S&F factory made steel window (box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc. including one shop coat of red oxide zinc chrome primer, complete all as specified and shown in drawings. |
| 18 | M&L for pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary supply and fixing of lugs, hinges, lock strike plate etc. complete all as specified and directed. |
| 19 | S&F factory made 2nd class hard wood rail and style 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 20 | M&L for 75mm thick PCC 1:4:8 type D-1 (using 20mm graded crushed stone aggregates) as in floors, sub base of floor etc, complete all as specified and directed. |
| 21 | M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates), complete all as specified and directed. |
| 22 | M&L for machine pressed rubber moulded concrete, interlocking coloured paver block, glossy finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments, complete all as specified and directed. |
| 23 | M&L for sand cushioning bed under paver blocks or filling under floors including spreading, levelling, watering if required, complete all as specified and directed. |
| 24 | Dismantling asbestos cement (corrugated or semi corrugated etc) sheets as in roof covering including ridges, complete all as per specified and directed. |
| 25 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 26 | M&L for mild steel framed work such as grills, gratings, hold fasts etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, ladders framed balusters and similar work, conforming to Fe-290-0 or Fe-310-0 including portions framed and hung as gates, pintle hinges, stops, hand made sliding bolts etc, complete all as specified and directed. |
| 27 | M&L for water proofing roof treatment, consist of a Atactic Polypropylene Modified polymeric membrane 3mm thick and minimum weight not less than 3.0 Kg/Sqm, reinforced with polyster non woven fabric matt (weight not less than 150 Gram/Sqm), laid with LPG torch forced application over roof surface with a side and end overlaps of minimum 100mm with and including priming @ 0.40 lit/Sqm the surface with a coat of hot blown bitumen of grade 85/25 @ 1.2 Kg/Sqm each at top and bottom of the membrane as bonding material including sealing all joints by thermo fusion including two coats aluminium paint and removal of existing treatment, complete all as specified and as per manufacturer's instructions. |
| 28 | M&L for 15mm thick rendering in cement mortar 1:3 on fair faces or brick / concrete surfaces on top of roof surface upto G+3 building with using water proofing compund and finished the surface even and smooth without using extra cement, complete all as specified and directed.Note :- WPC shall be measured and paid seperately under respective item. |
| 29 | S&F in repair of solid PVC wall lining (wall panelling) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed. |
| 30 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft / loose soil, complete all as specified and directed. |
| 31 | Removing surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 32 | M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 33 | M&L for kerb stone outer coloured surface machine pressed factory made of size 300mm long 100mm wide and 350mm deep in PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates), jointed in CM 1:4, complete all as specified and directed. |
| 34 | S&F 2mm thick fiber galss reinforced translucent corrugated sheeting with two corrugations side lap, fixed with coach screws and washers in roof, walls etc, complete all as specified and directed. |
| 35 | M&L for mild steel roof trusses (framed), trusses, purlins, cranes / gantries, rails & fastering & heavy brackets, cleats (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe-410-W (Gde-E-250 Quality - A), complete all as specified and directed. |
| 36 | Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exc 50 mtr and making good surface in any type of soil, complete all as specified and directed. |
| 37 | M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation for fencing post, filling in and mass concrete etc, complete all as specified and directed. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender