Tender For Provn Of Pakring Shed At Various Location And Interlocking Paver Block In Dad Residential Complex Under Ge(South) Bangalore
Tender Value
38.77 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
18 days left
EMD
77540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Pakring Shed At Various Location And Interlocking Paver Block In Dad Residential Complex Under Ge(South) Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of PCC of in ground floor and pavings including tiles n.exc. 15cm thickness below or above ground level. |
| 2 | M&L Surface excavation of soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out out complete. |
| 3 | Excavation in post holes in soft loose soil (or similar holes) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50mtr and making good surface. |
| 4 | M&L Cement concrete in foundations, filling and mass concrete PCC 1:3:6 type C-2 (40mm graded aggregate) complete as specified and directed. |
| 5 | M&L spreading and leveling in layers n exc. 25 cm thick complete all as specified and directed. |
| 6 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or sub floors finishing the surfaces even and rough to receive the topping layer complete all as specified and directed. |
| 7 | M&L for 100 mm thick cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. |
| 8 | M&L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete |
| 9 | S&F Steel work in rectangular/square/tubular trusses including special shaped washers etc, complete using ERW or induction Butt welded tubes complete all as specified and as directed. |
| 10 | S&F MS plates (plain or chequered) channels, square cut or notched)cSquare ,cut or notched forming holes, without any attachment conforming to Fe 410-W Gde E-250 Quality A |
| 11 | M&L for preparing new or previously untreated surface of steel any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified |
| 12 | Material and labour for 1:3:6 type C1 (20mm graded aggregate) Pre-cast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in CM 1:6 complete. |
| 13 | Material and labour for rendering 15 mm thick in CM 1:4 mixed with on external fair faces of brick work or concrete surface finished even and smooth without using extra cement. |
| 14 | M & L for preparing surface of newly plastered surface and applying three coats of white wash on wall surfaces. |
| 15 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified complete |
| 16 | Removing surplus excavated soil to a distance not exc 50 Mt & depositing where directed at a level not exc 1.5 Mt above the starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender