Tender For Repair To Flooring, Plastering, False Ceiling, Wall Panelling, Joinery And Sanitary Fittings For Zone C At Lgj Mil Stn Under Ge Lalgarh Jattan
Tender Value
50 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
17 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring, Plastering, False Ceiling, Wall Panelling, Joinery And Sanitary Fittings For Zone C At Lgj Mil Stn Under Ge Lalgarh Jattan
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on bricks or stone walls etc and including raking out joints, hacking for key scrubbing down with water etc complete all as specified & directed by Engr-in-charge. |
| 2 | M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement including M&L for preparation by suraface with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of 100% premium intetrior acrylic emulsion paint by using brush roller over and including one coat of primer complete all as specified & directed by Engr-in-charge. |
| 3 | M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished even and smooth without using extra cement etc upto height 9.60 m including M&L for applying two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on newly plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge. |
| 4 | M&L for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling finished fair and even and smooth without using extra cement including M&L for applying three coats of white wash on new plastered surface as on ceiling incl preparation etcetc complete all as specified & directed by Engr-in-charge. |
| 5 | M&L for Brickwork with fly ash bricks, old size bricks sraight or curved on plan exc 6m mean radius, built in cement mortar (1:6) including demoition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for complete removal of existing treament with help of mechanicallly and applying 1.5 to 2.5 mm thick acrylic wall care putty and smoothening the surfaces with sand paper/mechanised sanding etc (preparatary paint as directed), and applying two coat of 100% premium intetrior acrylic distemper paint by using brush roller complete all as specified & directed by Engr-in-charge. |
| 7 | M&L for complete removal of existing surface finishes and treating with two coat of weather proof exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc surfaces over and incl wall care putty (thickness very from 1.5 to 2.5 mm as required for desirable smoothness and levelling of surfaces in two or more layers) on old plastered surfaces of wall including preparation of surface complete all as specified & directed by Engr-in-charge. |
| 8 | M&L for preparation of old plastered surfaces and appying two coats of white wash on ceiling complete all as specified & directed by Engr-in-charge. |
| 9 | M&L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint (any colour/tint) on old wooden surfaces complete all as specified and directed by Engr-in-charge. |
| 10 | M & L for painting steel and iron surfaces of any discription,over 10 cm width or girth, with preparation of old surfaces with one coat of synthetic enamel paint ordinary tint all as spefified and directed |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified & directed by Engr-in-charge. |
| 12 | M&L joint free Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. Set & jointed in neat cement slurry & jointed in coloured cement to match the colour of tiles over & including 15 mm thick screed bed in cm 1:4 and pointed in epoxy grout to match in floor complete all as specified & directed by Engr-in-charge. |
| 13 | Ditto all as per Item no 12.00 here in before, on vertical surfaces such as skirtings ,set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) complete all as specified & directed by Engr-in-charge. |
| 14 | M&L joint free Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. Set & jointed in neat cement slurry & jointed in coloured cement to match the colour of tiles over & including 15 mm thick screed bed in cm 1:4 and pointed in epoxy grout to match in floor complete all as specified & directed by Engr-in-charge. |
| 15 | M&L coloured Glazed ceramic tiles of size 300X600 OR 450x300mmx7mm thick on verticle surface such as skriting/dados over and incluiding 10 mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified & directed by Engr-in-charge. |
| 16 | S & F double charged Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 completeall as specified and directed |
| 17 | S & F double charged Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in dado/skirting vertical etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick adhesive completeall as specified and directed |
| 18 | Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified & directed by Engr-in-charge. |
| 19 | Taking down chowkhats or frames exc 1.5 sq. m but n.exc 4.0 sq. m each with shutters (without taking off shutters from the frame) complete all as specified & directed by Engr-in-charge. |
| 20 | Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified & directed by Engr-in-charge.(Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.) |
| 21 | Taking down shutter but exc 1 sq. m and n exc 2 sq. m each complete all as specified & directed by Engr-in-charge. |
| 22 | Providing and fixing factory made uPVC white colour Sliding window ( of area not exceeding 2.0 Sqm each) Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified & directed by Engineer-in-Charge.(Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.) |
| 23 | S&F Providing and fixing factory made uPVC white colour fixed or openable ventilator /window area not exc. 1.00 Sqm each made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note:- The unit quoted by contractor excludes cost of glass/wiremesh and ncludes all other connected accessories net opening will be measured for payment purpose ) complete all as specified & directed by Engineer-in-Charge. |
| 24 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 24 mm thick size comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 550 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,magnetic catchers all as per direction of Engineer-In-Charge Including supply and fixing of the following items :-(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square tower bolt 150 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 100 mm-2 Nos per leaf |
| 25 | S&F powder coated aluminium frame for doors, windows, ventiators with one or more rebates including jointing cleats for fixing with powder coating on aluminium sections, minimum thickness of powder coating shall be 50 micron as per the specification, complete all as specified & directed by Engr-in-charge. |
| 26 | S &F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill toproper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 27 | S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m (min thick 1.50 to 1.80 mm ) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) in each window shutter and necessary accessary as required complete all as specified & directed by Engr-in-charge.. (Note:- Glass will measured and paid separately) |
| 28 | Supply and fixing in repairs door closer hydraulically regulated of aluminium cast type , designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 29 | Supply and fixing in repairs double action floor spring hydraulical regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,govering pivote madeof bras, oter parts made of mild steel heavy dutyand fix in floor complete all as specifiedand directedby Engr-in-Charge. |
| 30 | S&F 4 mm thick ordinary quality sheet glass and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified & directed by Engr-in-charge. |
| 31 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 150 mm one or more rebates comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed by Engr-in-charge.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 32 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified & directed by Engr-in-charge.Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 33 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge including supply and fixing following items :-(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020. (e) Stainless steel (304 Grade) Finished Floor door stopper 140 mm -1 Nos per leaf. |
| 34 | S&F for Factory made single extruded WPC (Wood Polymer Composite) glazed and skeleton plain door shutter of 35 mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Including supply and fixing of stainless steel 304 Grade (natural finish) wire cloth complete all as direction of Engineer-in -Charge including supply and fixing of following items :-(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) finished sliding bold 300 mm-2 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020. (e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf.(f) Stainless steel (304 Grade) wire cloth fixing as per manufacturer's instructions |
| 35 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed by Engr-in-charge including supply and fixing of following items :- a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf. (d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020. (e) Stainless steel (304 Grade) Finished Floor door stopper-1 140mm Nos per leaf. |
| 36 | S & F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 37 | S&F in repair sheet glass 4 mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane including taking hacking out old broken glass from metal frame complete all as directed. |
| 38 | S&F in repair 4 mm thick figured glass pin head type and glazing with oil putty in square n. exec 0.5 Sqm in each pane including taking hacking out old broken glass from metal frame complete all as specified & directed by Engr-in-charge. |
| 39 | S&F in repair Stainless Steel curtain roads, standard quality, not less than 19/25 mm dia with heads, wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finals), stop roller etc, fixed on wall for doors and windows curtains, cutting as required length and fixing at site including fixing arrangements, rawl pluig, screws etc (size and dia of rods are directed by Engr-in-charge ) including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engr-in-charge. |
| 40 | Dismantling water tank of capacity Exc 250 litres and not exc 500 litres and removing from site and S&F 500 litres, rotational moulded polyethylene water storage tank ISI Marked (Cylindrical vertical with closed top), hoisted and fixed in position incl 20 mm bore PTMT float valve,connecting 2 Nos nipple/ sockets etc complete all as specified & directed by Engr-in-charge. |
| 41 | Dismantling water tank of capacity Exc 500 litres and not exc 1000 litres and removing from site and S&F 1000 litres, rotational moulded polyethylene water storage tank ISI Marked (Cylindrical vertical with closed top), hoisted and fixed in position incl 20 mm bore PTMT float valve,connecting 2 Nos nipple/ sockets etc complete all as specified & directed by Engr-in-charge. |
| 42 | S&F 5 mm looking mirror 0.45X 0.60 M of selected quality with bevelled edge mounted on stainless steel stud or fixed in desiner border strip and 9 mm plyboard in backside complete all as specified and directed by Engineering-in-Charge. |
| 43 | S&F in repairs vitreous china wash hand basin coloured flat back size 550 x400 mm, long screwed shank fly nut flange end including cutting for and pinning in ends for brackets in 1:3 CM, including 32 mm dia chromium plated waste coupling/trap and waste pipe complete all as specified & directed by Engr-in-charge. |
| 44 | S&F in repair vitreous china wash hand basin coloured counter top (bowl type/oval shape) of size 560x450mm, long screwed shank fly nut flange end including cutting for and pinning in ends of brackets in 1:3 CM including 32mm dia chromium plated waste coupling/bottle trap complete all as specified and as directed by Engineer-in- charge |
| 45 | M&L 20 mm thick Granite work (any type) work (table rubbed and polished) in steps, jambs, pillars, window sills, cooking plateforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed bed in CM 1:6 complete all as specified and directed . |
| 46 | S&F in repairs vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including cast iron 'P' or 'S' trap and connection to trap antisyphonage pipe and making good to floor complete all as specified & directed by Engr-in-charge. |
| 47 | S & F in repair vitreous china wash down water closet pan (Pedestal pattern) white EWC floor or wall hung type with PVC seat cover including fixing bolts and making connection to flushing cistern, including 100mm dia trap etc, for low level cistern complete all as specified & directed by Engr-in-charge. |
| 48 | S&F in repair vitrieous china EWC casode type white including cistern, seat cover, inlet accessories, one piece type connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., complete all as specified and as directed by Engineer-in- charge |
| 49 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle and telescopic pipe and connection to pipe including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified & directed by Engr-in-charge. |
| 50 | S&F in repair swan neck type pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified & directed by Engr-in-charge.Wt not less than 450gms |
| 51 | S&F in repair Brass CP 2-in-1 wall L-band mixer of bore dia 15mm for mixing hot & cold water screwed down for iron pipe and fixed. |
| 52 | Supply and fixing in repairs single liver basin mixer with popup waste system & 450mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe complete all as specified and as directed by Engineer-in-charge. |
| 53 | S&F in repairs 15 mm two-way bore bib taps chromium plated cast copper alloy with crtuch or butterfly handle, screwed down, screwded for iron pipe or for brass ferrule and fixed. |
| 54 | S&F in repair long bib taps 15mm bore cast coper alloy CP long body fancy type, with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engr-in-charge. |
| 55 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified & directed by Engr-in-charge. |
| 56 | S & F in repair 15 mm dia stop/ Angle valve fancy type, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified & directed by Engr-in-charge. |
| 57 | S&F in repair, chromium plated shower rose, 125mm size, brass chromium plated with sweivel joint and connecting rod complete all as specified & directed by Engr-in-charge. |
| 58 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed by Engr-in-charge. |
| 59 | S&F Supplying and laying of 20 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing and connection complete all as specified & directed by Engr-in-charge. |
| 60 | S&F Supplying and laying of 25 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing and connection complete all as specified & directed by Engr-in-charge. |
| 61 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store (measured overalll as fixed along the cente line over fittings and accessories) complete all as specified & directed by Engr-in-charge. |
| 62 | S&F 110 mm dia UPVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified & directed by Engr-in-charge. |
| 63 | S&F 75 mm dia UPVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls complete all as specified & directed by Engr-in-charge. |
| 64 | S & F 110mm dia uPVC (SWR) bends with access door |
| 65 | S & F 75 mm dia uPVC (SWR) bends with access door |
| 66 | S&F PVC (SWR) in repair floor trap of 75 mm dia outlet plain with grating including CP grating jointing with solvent cement complete all as specified & directed by Engr-in-charge. |
| 67 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling of steel work complete all as specified & directed by Engr-in-charge. |
| 68 | M & L for prepration of new Surfaces of any description, and apply 02 coat of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth,not otherwise described complete all as specified & directed by Engr-in-charge. |
| 69 | M& L for Concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-charge. |
| 70 | M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as filling of sunken floors/bottom and side of drain complete all as specified & directed by Engr-in-charge. |
| 71 | M&L for water proofing treatment to RCC sunken slab (not exceeding 45 cm depth of sunken) as specified below complete all as specified and directed by Engineer-in-Charge.(a) Applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface.(b) Cleaning the surface with wire brush/coir brush, removing loose marterial like dust particle, dirt etc.(c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls.(d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface.(e) Laying of glass fiber mesh size of 2 mm x 2 mm immediately on the above coating.(f) Apply second coat of two component modified polymer coating after 72 hrs.(g) Cement concrete 1:4:8 over the coating as per requirement (h) Joining the sanitary pipes with the water proofing tape having bridging ability of more than 1.5 mm(j) Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout complete as specified.(k) Fixing 40 mm dia PVC pipe 450 mm long bottom of the sunken and warping of bath seal tape on the pipes insearted through walls to floor and seal it.Make:- Dr. Fixit/Fosroc/STP/Asianpaints.Note:- 1. The tretament shell be carried out by approved authorised applicator approved by GE as per manufacturer instructions and as directed by Engineer-in-charge.2. PCC filling in sunken portion will be measured seperately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender