Tender For Repair/Maint Of Otm Accn To Bldgs Located In Zone E1 Area Of Age B/R-Ii Under Ge (East) Lucknow
Tender Value
35 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Otm Accn To Bldgs Located In Zone E1 Area Of Age B/R-Ii Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed |
| 2 | M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed. |
| 3 | M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius in half brick thick wall, old size brick built in cement mortar 1:4 complete all as specified and as directed. |
| 4 | Dismantling floor, hearth wall tiling etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and directed |
| 5 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, in floors etc laid over 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 6 | M&L for glazed ceramic coloured tiles of size 600x300x7mm thick/450X 300X 7mm thick over 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected |
| 7 | M&L for Vitrified ceramic coloured tiles light shade 10 mm thick (Square/Rectangular) polished area of each tiles n exc 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | Description all as per item no 7 above but on skirting with 10 mm height rendering in CM 1:4 complete all as specified and directed |
| 9 | M&L for 18-20 mm thick machine cut kota stone slab flooring/skriting over 20 mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 10 | Demolition of cement Concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed |
| 11 | Dismantling of stone slabs and tiles laid dry of any description or thickness in floor, aprons etc complete all as specified and directed. |
| 12 | M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in floor sub base comoplete all as specified and directed |
| 13 | M & L, 40mm thick cement concrete 1:2:4 type B-1using 20mm graded aggregate as in floors, surface finished even & smooth using extra cement complete all as specified and directed. |
| 14 | M&L for cement concrete (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in surface channels, drains, coping and benching including necessary formwork whrever required. Note : Forming fair finished channel for drain using extra cement shall be measured and paid for separately. |
| 15 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. |
| 16 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified |
| 17 | M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). |
| 18 | M & L for forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade \\"A.\\" complete all as specified and directed. |
| 19 | M & L for 75mm thick PCC type D-2 (1:4:8) using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 20 | M & L for chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry with mixture of white & grey cement and pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 21 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality laid over and including 25mm thick sand cushioning vibrated with mechanical vibrator complete all as specified and directed. |
| 22 | M&L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar, all complete as per the direction of Engineer-in-Charge.Make-JKCement/Birla/Ultratech. |
| 23 | M & L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge. |
| 24 | M & L for repair to plaster by using readymix mixture of thickness 5mm to 7mm in ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering theceiling surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge |
| 25 | Material & Labour for preparation of new surface or complete removal of old surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over one coat of Putty with smooth finish surface completed all as specified and directed.Note- 1.Primer and emmulsion to be carried out through air less spray machine (Mechanical means) 2. No separate payment will be made for putty and primer. Make- Berger Walmasta Glow / Ace Sparc Advanced / Nerolac Excel total type emulsion3. Scafolding / ladder abd tool & plants shall be provided by contractor at his own cost and the cost of same shall be deemded inclusive in quoted unit rate. |
| 26 | Notes for Item No 25 to 33 :-MoU with Manufacturer’s of Paint: (a) Irrespective of whatever specified elsewhere in tender documents, the work shall be got executed through authorized applicator of manufacturer’s Asian Paint Ltd/ / Kansai Nerolac Paints Ltd/ Acro Paints Ltd / Berger Paints India Ltd only. The tri-party agreement between contractor, said manufacturer’s of Paints and their authorized Applicator on Non Judicial Stamp paper of Rs. 100/- (format of MOU shall be provided by department.) Authorised Applicator of above mentioned Paint Manufacturers shall have valid authorization letter from the manufacturers. (b) The MoU shall be submitted by bidders in cover-I (technical bid) along with other requisite documents as per NIT. (c) MoU shall be verified from authorized applicator and Manufacturer’s Authorized delar (if Accepting officer found verification is required). In case of fake MoU found during of verification of MoU, the bidder shall be liable for rejection of technical bid and financial bid shall not be opened of such bidders and appropriate necessary disciplinary action shall be taken against firms as deemed fit. |
| 27 | M & L for preparation of old decorated surface of walls, cornices, pilasters etc by washing rubbing down and stopping old distempered and painted surfaces and applying one coat of oil bound distemper on walls, cornice, pilasters etc complete all as specified and directed. |
| 28 | Material & Labour for preparation of new surface or complete removal of old surface by washing rubbing down and stopping old distempered and painted surfaces and applying two coat of oil bound distemper on walls, cornice, pilasters etc complete all as specified and directed.Make- Berger Bison acrylic interior Distemper / Nerolac Beauty acrylic distemper. |
| 29 | Material & Labour for preparation of new surface or complete removal of old surface from wall and applying one coat of wall care putty (1 mm thick) and finished surface even and smooth, complete all as specified and directed. |
| 30 | M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying two coat of cement base paint on walls tinted or white including complete all as specified and directed |
| 31 | M & L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying two coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed. |
| 32 | Description all as per Item No 30.00 above but on ceiling. |
| 33 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 34 | All as per item No 32 here-in before but on steel surfaces |
| 35 | M & L for writing letter or figured (Block, Roman, Italic or Indian) over base coat n exc 30 cm height and not exc 25cm in width with two coats of synthetic enamel paint complete all as specified and directed.Note : Comma, dashes etc shall be provided as directed and by EIC and cost of the same shall be deemed inclusive in quoted unit rate. |
| 36 | Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 37 | M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover in drain, manhole cover, plateform etc all as specified and directed. |
| 38 | M&L for TMT bars 6 to 8 mm dia for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed. |
| 39 | Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridge complete all as specified and directed |
| 40 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L- type or J- type or cranked hook bolts complete all as specified and directed |
| 41 | M & L for Asbestos cement one piece plain angular ridge 6mm thick fixed with L- type or J- type or cranked hook bolts complete all as specified and directed |
| 42 | S&F Pre - painted galvalume aluminum zink coating GI based corrugated steel sheeting 0.50 mm thick of an color having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified |
| 43 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed |
| 44 | S&F rolled mild steel section as in main and cross beam, hip and jack rafters; purline where connected to common rafter and running rail and guides for sliding door;fixed with angle cleat or other connecting plates complete all as specified and directed. |
| 45 | Dismantling of old ceiling boards any type and any thickness including cover fillets/ aluminum snap grid complete all as specified and directed |
| 46 | M&L false ceiling with 4 mm thick E-board white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire including two coat of oil bound distemper complete all as specified and directed |
| 47 | S&F in repair 4 mm thick E-board tiles of size 600 x 600 mm (without grid work) in ceiling fixed with screw or as per manufacturer instruction all as specified and directed. |
| 48 | Taking Down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 49 | Taking downChowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 50 | Taking down shutters of any description area n exc 1.00 sqm each and removing from site all as specified and directed. |
| 51 | Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each complete all as directed |
| 52 | S&F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed |
| 53 | S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. complete all as spcefied and directed |
| 54 | S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast, etc.complete all as spcefied and directed |
| 55 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed |
| 56 | S&F hold fasts; supports or stays for rainwater, knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed |
| 57 | S&F 30mm thick factory made flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed |
| 58 | S&F 35 mm thick 2nd class factory made hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed |
| 59 | S & F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed. |
| 60 | S & F for factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame all as specified and directed. |
| 61 | S & F 100 mm size butt hinges, SS-304, stainless steel heavy duty and fixed complete all as specified and directed. |
| 62 | S & F in repair 100 mm size butt hinges, SS-304, stainless steel heavy duty and fixed complete all as specified and directed. |
| 63 | S&F 250 mm long Aluminum alloy, anodised sliding door bolts, plate type, ,and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed |
| 64 | S & F in repairs aluminium alloy, anodized, sliding door bolt, 300mm long, with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed |
| 65 | S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate, fixing by welding or screws as required complete all as specified & directed. |
| 66 | S&F in repairs 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed (Fixed as in Existing iron /wooden frame in own arrangement). |
| 67 | S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 68 | S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed. |
| 69 | S&F in repair 150mm long aluminium handles cast type, anodised, complete all as specified and directed. |
| 70 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (exc 1.5 sqm) complete all as specified and directed |
| 71 | S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complet all as specified and directed |
| 72 | S&F 3 mm thick Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and directed |
| 73 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 74 | S&F in repair for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples, complete all as specified and directed. |
| 75 | S&F in repair including taking down from rivet, Nut & Bolt /welding / wooden beading stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples/wooden beading/ necessary welding complete all as specified and directed |
| 76 | S & F for 140mm long floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 77 | M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on steel surfaces including preparation of surfaces all as specified and directed. |
| 78 | M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces including preparation of surfaces all as specified and directed. |
| 79 | S&F of rubber beading n exc 10 cm wide as in doors complete all as specified and directed |
| 80 | S & F for mild steel framed work as in doors/window flat iron or gates of angle or other section drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and stainless steel hings, Fe-410W (Gde-E-250) quality-A, complete all as specified and directed. |
| 81 | S&F aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc., complete including aluminium and rubber beading all as specified and directed. |
| 82 | S&F for powder coated alumium glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rails 100x44mm. Make - jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and including glazing by using 5mm thick plain sheet glass and stainless steel wire mess of dia 0.36mm and aperture 1.4mm, and including aluminum anodised grills of aperature 75 mm and fixed in frame of window and ventilator including necessary fixing arrangement complete all as specified and as directed. ((Note-glazed shutters glass thickness not less than 5.00 MM and wiremess shutter with SS wiremesh as approved by GE is also included. No extra payment will be made separately) |
| 83 | S & F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed and welded, complete all as specified and directed. |
| 84 | S & F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed. |
| 85 | S & F for steel ventilator with top hung shutter including box type hinges, peg stay and glazing bars complete with dove tailed or welded, complete all as specified & directed. |
| 86 | S &F aluminium anodised partition wall with 5.50mm thick glass and/or 12mm thick prelaminated particle board exterior grade decorated both side and 38mmx63mm size anodised aluminium section frame work fixed with aluminium and rubber beading and fixing arrangement for fixing the framework to wall/floor and frame to frame complete all as specified and directed |
| 87 | S&F in repair kitchen PVC cabinet in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finishincl all necessary fitting as per site requitment as per make and specification mentioned as per drawing and all are specified and directed by Engineer-in-charge on site. |
| 88 | M&L 19/20 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed as in repairs, complete all as specified and directed. |
| 89 | M&L for in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete, all as specified & directed. |
| 90 | M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per makers instructions complete, all as specified & directed. |
| 91 | M & L for 6mm thick external teak wood lipping for block board or veneered particle board , fixed with nails, complete all as specified and directed. |
| 92 | M&L magnet ball catcher for cup board shutters, ISI marked complete all as specified and directed. |
| 93 | S&F in repairs continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete, all as specified & directed. |
| 94 | Taking down and refixing in same opening of aluminum door shutter of area exc 1.00 sqm but n exc 2.00 sqm including necessary repair with replacement of rubber beading, and other small articles such as cleats, hinges, screws etc complete all as specified and directed |
| 95 | S&F in repair Double action floor spring hydraulically regulated made up of aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 96 | S&F in repairs Aluminum (Die cast body) hydraulic door closer regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width complete all as specified |
| 97 | S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed |
| 98 | S&F, 500 Ltr capacity Rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one all as specified and directed |
| 99 | Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of capacity exc 250 n exc 500 ltrs complete all as specified and directed. |
| 100 | S&F in repair 20 mm dia brass gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 101 | S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections all as specified and directed |
| 102 | S&F 20 mm Tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed |
| 103 | S&F in repair vitreous China wash hand basin white size 550 x 400mm including brackets complete all as specified and directed. |
| 104 | S&F in repair vitreous China, table top, wash hand basin of size 600 mm x 435 mm x 180 mm, fancy type including 32 mm dia waste coupling and waste pipe complete all as specified and directedMake- Model -Jaguar (CNS-Jaquar JDS-WHT-2590N), Kohler (314591N-O), ROCA (CNS-RS3275L000C) |
| 105 | S&F in repair to the any existing EWC/IWC has to be converted into a single piece EWC of size 380x670x765 mm with UF soft close slim seat cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, S Trap- 300 mm complete all as specified & directed. Make- Model -Jaguar (CNS-Jaquar WHT-8T3P180SPPSM), Kohler (CNS-289221N-S-O), ROCA (CNS-RS3460NL460TRA801D12003) |
| 106 | S & F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 107 | S&F in repairs 5.5 mm thick bevelled edge mirror of selected quality fixed to wall with stainless steel spacer stud, standoff screws (Min 4 Nos upto 1.00 Sqm), size of standoff screw shall be min 25 x 25 mm complete all as specified and directed |
| 108 | S&F in repair of aluminium anodised six peg hanger of extraded section & fixed in positions of size 300 mm long as approved by GE complete all as specified and directed. |
| 109 | S&F in repair 15mm dia spindle for bib taps,angle valve and pillar taps as required as per ground and directed by Engr in charge complete all as specified.(Including taking down existing spindle carefully and fixed the same in position) |
| 110 | S & F in repair 15 mm bore dia of pipe pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed |
| 111 | S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 112 | S&F in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed of dia 32mm complete all as specified and directed. |
| 113 | S&F in repair 32 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 114 | S & F in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed. |
| 115 | S & F 32 mm bore Low density polyethylene pipes for urinal etc complete all as specified and directed. |
| 116 | S&F in repair vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed |
| 117 | S&F in repair vitreous china white urinals half stall type complete including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, spreader, grating, unions for discharge pipe etc (excluding flushing cistern) complete as specified and directed. |
| 118 | S&F in repair Vitreous china sqatting pan, Orissa pattern, size 580 x 440 mm white , with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and directed |
| 119 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and directed. |
| 120 | S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 121 | S & F in repair long body Bib taps cast copper alloy chromium plated with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe ) |
| 122 | S&F, in repair, 15mm dia two way bib taps, cast copper alloy chromium plated fancy type handle screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 123 | S & F in repair 15 mm bore Stop valves (angle type) cast copper alloy chrominum plated fancy type screwed down high pre-ssure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 124 | S&F in repair stop valves, 15mm dia, cast copper alloy, CP fancy type with long shank and cup (concealed type) screwd down, high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions complete all as specified and directed. |
| 125 | S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed |
| 126 | S & F, in repair 15mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed. |
| 127 | S & F, in repair 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed. |
| 128 | S & F, in repair 25 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed. |
| 129 | S&F in repair PVC (SWR) floor trap, plain with grat-ing including joint-ing with solvent cement ( Diameter of outlet 75mm) complete all as specified and directed. |
| 130 | S&F in repair CP grating doom 100 mm dia chromium plated all as specified |
| 131 | M&L in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 132 | S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 133 | S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls ( 75mm Bore) complete all as specified and directed. |
| 134 | S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls ( 110 mm Bore) complete all as specified and directed. |
| 135 | S & F in repair PVC (SWR) bends any radius (75mm Bore) complete all as specified and directed. |
| 136 | S & F in repair PVC (SWR) bends any radius (110mm Bore) complete all as specified and directed. |
| 137 | S&F in repair plastic water closet seat cover white, closed pattern with flat bottmom & cover and aluminum anodised hinging device all as specifed and as approved. |
| 138 | S&F in repair 28 mm dia stainless steel curtain rod, superior quality (weight not less than 300 g/RM) with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed. |
| 139 | S&F in repair CP brass hand shower (health faucet) with 8mm dia 1m long flexible tube & wall hook complete all as specified & directed. |
| 140 | S&F in repair CP brass hand shower (health faucet) with 8mm dia 1m long flexible tube & wall hook complete all as specified & directed. Make : Jaquar Cat No.: ALD-CHR-587 / Kholer (Cat No. -12925IN-CP/ ROCA (Cat No. RF9060AI. |
| 141 | S&F in repair CP brass jet spray with hand hold arrangement including 1.5 m long flexible pipe with hook of superior quality complete all as specified and directed |
| 142 | S&F, glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets, all as specified and directed. |
| 143 | S&F, glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets, all as specified and directed. Make: Jaquar range Continntal Code No. 1173 or equvailent from Marc/Ess. |
| 144 | S&F in repair 15 mm bore chromium plated brass sink mixer with hot and cold arrangement with long shank, cup and movable spout complete, all as specified and directed. |
| 145 | S&F in repair 15 mm bore CP brass Central Hole Basin mixture fixed to GI pipe.complete all as sp and directed. |
| 146 | S&F in repairs 15 mm dia brass CP fancy wall mixer 3 in 1 with L Bend (incl provision of O/H shower & hand shower) for mixing hot & cold water screwed down for iron pipe with hand shower and tube complete all as specified and directed |
| 147 | S&F in repair 15mm bore CP brass Angle Valve stop cock with wall flange complete all as specified & directed. |
| 148 | M & L for 16-18 mm thick granite work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like over 20mm thick cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and directed. |
| 149 | S&F in repairs 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. |
| 150 | M/L for roof/sunkn treatment with polymeric water proofing mem breane with certain specification given below as under complete all as specified & directed(a) M&L plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement.(b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry(c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper.(e) Aapplying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm (f)including M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in mass concrete of floor etc complete all as specified and directed.(g) Also includingTaking down loose filling of aggregate in any form from sunken slab and refiiling after treatment. |
| 151 | M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces and allow to dry.(b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total comsumption(c) having below properties:-1. Elongation - 500%-600%2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm. (c) Dismantling of existing roof treatment of any description and any thickness including PCC padding/tiles or both complete including removal of debris away from the site complete all as directed. (d) 50mm avg thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs/padding /benching or mud stops, and platform for mounting service tanks, rounded,chamfered on edges including necessary use and waste of from work etc all as specified and directed. (e) M&L for screed bed 10mm thick in CM 1:3 on concrete surfaces/ roof/ parapet wall using WPC as per manufacturer instruction finished fair & even without using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information |
| 152 | M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) Applying a coat of fibre reinforced PU primer confirming to ASTM D412 @ 30% water dilution on prepared surfaces and allow to dry.(b) Supply and Applying 2 coats of Hybrid PU based elastomeric single component coating over primer surface @ 10kg /10.76 Sqm total comsumption(c) having below properties:-1. Elongation - 500%-600%2. Solid contents - 80%, 3.Tensile Strength - 1.6N/mm2 4. Adhesion to concrete - 2.2N/mm2 5. Initial hardness shore strength - 60Min. 6. Tear Strength - 14Mpa. 7. Total thickness of layer shall be 1.2 - 1.5mm. (c) Dismantling of existing roof treatment of any description and any thickness including PCC padding/tiles or both complete including removal of debris away from the site complete all as directed. (d) 50mm avg thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs/padding /benching or mud stops, and platform for mounting service tanks, rounded,chamfered on edges including necessary use and waste of from work etc all as specified and directed. (e) M&L for screed bed 10mm thick in CM 1:3 on concrete surfaces/ roof/ parapet wall using WPC as per manufacturer instruction finished fair & even without using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender