Tender For Repairs To Various Snow Machines Viz. Snow Cat 27 (Preet 90 Hp), Snow Cat 10 (Farmtrac 60 Hp), Snow Machine 69 (Lpt 715) And Unimog 423 Of Mechanical And Hospital Sub-Division 1St Anantnag.(3)
Tender Value
74400
Estimated cost
Bid Submission
09 Oct 2026
0 days left
EMD
1490
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Various Snow Machines Viz. Snow Cat 27 (Preet 90 Hp), Snow Cat 10 (Farmtrac 60 Hp), Snow Machine 69 (Lpt 715) And Unimog 423 Of Mechanical And Hospital Sub-Division 1St Anantnag.(3)
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to Fixed Plough assembly by way of dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged/cracked spots. The job also includes replacing damaged ISMC 100 mm along with required size nuts and bolts as per the sample and as directed by the Engineer in Charge(Snow cat 27 & Snow cat 10) |
| 2 | Providing & Fabrication of Tool Box on the rear side of Snow Cat over which a old serviceable Fuel Tank of Capacity 160/180 litres could be mounted, dimensions of the tool box are to be kept as length 762mm, width559mm, height 508mm. The same need to be fabricated out of the Ms angle of size 06mm thickx38mmx38mmx9753mm, Ms Sheet 03mm thickx1828mmx914mm & flat iron 06mm thickx32mmx6096mm. All the other items required for execution of job needs to be provided.The job also includes providing/mounting of old serviceable fuel tank of 160/180 litres capacity on the fabricated tool box. The job includes providing of complete fitting arrangement like rubber packing, nuts & bolts of required size. The job includes providing and fitting of supply and return diesel pipes including pipe clips, banjo bolts etc of required size. The job includes painting of tool box and fuel tank with two coats of synthetic enamel paint in black after two or more coats of metal premier.The job includes testing of the machine on road for checking proper functioning of the machine and the equipment’s fitted. All the tools, tackles, skilled labour, leads, lifts and carriage of machine from Pahalgam control room to local work shop is with scope of the contractor.( Snow cat 27 & Snow cat 10) |
| 3 | P/F of starter/ignition switch along with replacing the start/stop solenoid switch with mechanical spring loaded start/stop type mechanism by way of removing the old damaged starter switch and solenoid and replacing the damaged parts with new parts as mentioned above. All the consumables and parts required are in the scope of the part. (Snow cat 10) |
| 4 | Fabrication of new cutting edges out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats to the matching length of two pieces of the existing fitted cutting edges of the blade and drilling of holes(12 in total) of size 16-18mm as required by using oxy- acetylene gas and other tools and tackles. The job also includes supply of new set of M14 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by the firm (Snow cat 27 & 10) |
| 5 | Fabrication of new cutting edges for Snow Service Blade Assembly out of MS Flats with matching dimension of width and thickness, which will be supplied by the Department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 24 holes of size 16-18 mm at required locations. The job also includes supply of new set of M14 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm. ( Snow Machine 69) |
| 6 | Fabrication of new cutting edges for Giletta/Bucher blade assembly out of ms flats with matching dimension of width and thickness, which will be supplied by the department. The fabrication involves of cutting the flats by using oxy- acetylene gas to the matching length of four pieces of the existing fitted cutting edges of the blade and drilling of 20 holes of size 18-20mm at required locations. The job also includes supply of new set of all m16 bolts with nuts and washers of standard grade. All tools and tackles during execution of work are to be provided by firm.(Unimog 423) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender