Housing Urban and Rular Development Government Departments Closing in 0 days TDR #57818825

Tender For Repairs To Various Snow Machines Viz. Snow Cat 20 (Preet), Snow Cat 90 Hp (Sonalika), Snow Cat 31 (Farmtrac 90 Hp), Snow Cat 15 (Farmtrac) And Snow Machine 59 (Lpt 715) Of Mechanical And Hospital Sub-Division 1St Anantnag. (1)

Issued by Government Departments · Anantnag, Jammu and Kashmir
Tender Value
54500
Estimated cost
Bid Submission
09 Oct 2026
0 days left
EMD
1090
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repairs To Various Snow Machines Viz. Snow Cat 20 (Preet), Snow Cat 90 Hp (Sonalika), Snow Cat 31 (Farmtrac 90 Hp), Snow Cat 15 (Farmtrac) And Snow Machine 59 (Lpt 715) Of Mechanical And Hospital Sub-Division 1St Anantnag. (1)

BOQ

Name of Work:- Repairs to various Snow Machines viz. Snow Cat 20 (Preet), Snow Cat 90 HP (Sonalika), Snow Cat 31 (Farmtrac 90 HP), Snow Cat 15 (Farmtrac) and Snow Machine 59 (LPT 715) of Mechanical and Hospital Sub-Division 1st Anantnag. (1)
Sl. No. Item Description
1Repairs to blade assembly by way of dismantling the blade assy. from the machine then cutting of the rear horizontal support brackets 02 no.’s of the blade by way of gas cutting and shifting it inwards towards the nose of the blade by 8” and replacing the vertical support channels 02 no’s by ISMC 100 L-1000mm 02 No.’s by way of cutting and welding. The job also includes providing and welding of 04 no’s gusset plates of size 250x160mm between the vertical and horizontal support brackets. Further the job includes repairing of the curved blade profile by way of gas heating, hammering & patch welding where-ever necessary to smoothen out the blade. It also includes the filling of cracks and recesses throughout the whole blade by filler material. The job also includes P/F of nuts and bolts of required size wherever required and includes primer coating along with required paint (two coats) on the exposed/welded surface of the blade.SNOW CAT 20 (PREET), SNOW CAT 90 HP (SONALIKA), SNOW CAT – 31 FARMTRAC 90HP & SNOW CAT –15
2Providing & Fitting of the complete tie rod assembly, the job including dismantling of the defective tie rod assembly, removal of worn tie-rod ends/ball joints, supply and installation of new tie rod assembly (01 No.) replacement of tie-rod end/ball joint set (02 Nos.) castellated nuts, split pins and allied fastening items, grease and including GST. The work shall include proper tightening, greasing, checking of steering play and road/operational testing after replacement SNOW CAT 90 HP (SONALIKA
3Repairing to the wiper electric motor this job includes wiper motor repair/servicing with carbon brush, bearing/bush and internal electrical components as required along with repairs to wiper linkage/connecting rod bushes and clips it also includes removal, inspection, servicing and refitting of the wiper motor assembly, wiring, terminals and allied electrical consumables.SNOW CAT 15 HP (Farmtac)
4Dismantling of Damaged Wiper Motor Assembly from 90HP Farmtac (S/C 31) and replacing the same with a fresh wiper motor assembly (JCB Type). The job needs to be carried out because the existing motor wiper assembly (turning faulty off and on during clearance operations) is incapable in removing snow-off the wind shield during snow fall. The Job also includes replacing of arms/blades of suitable length which can swing and swept all along the wind shield.
5Providing And Fixing Of 3\\" Thick Foam on The Inside of Seat Covers Which Includes Cutting and Sizing as Per Requirement for Cushion Purpose and Then Providing and Fitting of Seat Covers to Be Fabricated Out of Synthetic Leather Material for Driver Seat of Required Dimension. The Job Also Includes Cutting Sizing and Stitching of Synthetic Leather Material as Per Size Requirements. SNOW CAT –15
6Providing and Fitting of new horn Set. LPT-59 (715).
7Providing and Fitting of Pre- Cleaner entire assembly (bowl type) for SC 15 Farmtac (60 HP).
8Providing and fitting of Cabin Glass 5mm thick (fiber) of size 2x2 feet. The job also includes providing and fitting of rubber beading of required size for LPT 715 (MC 59).
9Dismantling, troubleshooting, rectifying, testing and recommissioning of cabin heating unit, including flushing of heater matrix, flushing of pipes & valves, testing electrical continuity, and restoring nominal thermal regulation inside the operator cabin and check for clogged air filters for snow cat Preet 20.
10Repairs to Radiator by way of dismantling the radiator from the machine and then shifting the damaged radiator from site at Vailoo to local market for repairs by way of thoroughly washing with caustic soda and then brazing the leaking fins and joints and testing thereof for Snow Cat 15 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57818825
AUTHORITY Government Departments
TENDER VALUE 54500
LAST DATE 09-10-2026
Authority
Authority Name Public Works Department
Work Description Tender for Repairs To Various Snow Machines Viz. Snow Cat 20 (Preet), Snow Cat 90 Hp (Sonalika), Snow Cat 31 (Farmtrac 90 Hp), Snow Cat 15 (Farmtrac) And Snow Machine 59 (Lpt 715) Of Mechanical And Hospital Sub-Division 1St Anantnag. (1)
Basic Detail
Tender No MHDA/TS/2026-27/64
Bidding Type Tender
Location
City Anantnag
State Jammu and Kashmir
Key Dates
Publish Date 01 Oct 2026
Submission Date 09 Oct 2026
Open Date 10 Oct 2026
Finance
Tender Value 54500
Tender Fee 200
EMD 1090
Exemption Not Available
Document List
125ab413-7486-4596-8831-82994f2aebee.html
BOQ_1105449.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 01, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Oct 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

125ab413-7486-4596-8831-82994f2aebee.html

xls

BOQ_1105449.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders