Tender For Nctps-I - Es Circle - Em-I Dn - S.Dn-Iv - Annual Overhauling Of Lt Motors And 6.6Kv, 3500Kw Bfp Motor Cooler 1B & 1A Checking Work At Unit I During The Year 2026-27
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
6700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nctps-I - Es Circle - Em-I Dn - S.Dn-Iv - Annual Overhauling Of Lt Motors And 6.6Kv, 3500Kw Bfp Motor Cooler 1B & 1A Checking Work At Unit I During The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Overhauling of LT Motors Overhauling of Auxiliary Oil Pump (MOT) Motor-1B (100 kW) |
| 2 | Labour required for Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides,checking of bearings housings, providing sleeves in the end covers on DE & NDE (optional) |
| 3 | Brazing of new terminal leads from winding, its terminal works (Optional) |
| 4 | Overhauling of Auxiliary cooling water pump motor - 1A & 1D (110 KW LT Motor) |
| 5 | Labour required for Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides,checking of bearings housings, providing sleeves in the end covers on DE & NDE (optional) |
| 6 | Brazing of new terminal leads from winding (Optional) |
| 7 | Overhauling of Sea water booster pump motor - 1A & 1D (55 KW LT Motor) |
| 8 | Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional) |
| 9 | Brazing of new terminal leads from winding, its terminal works and provision of new terminal block for 3 phase, 415V 55KW Sea Water Booster Pump motor (optional) |
| 10 | Overhauling of Ash water supply pump motor-1B (37 KW) |
| 11 | Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces of one side,checking of bearing housings ,providing sleeves in the end cover of one side (optional). |
| 12 | Brazing of new terminal leads from winding, its termination works and provision of New Terminal Block for 3 phase, 415 V, 37KW Ash Water Booster Pump motor (Optional). |
| 13 | Overhauling of Instrument air compressor motor- 1A (150KW) |
| 14 | Labour required for Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides,checking of bearings housings, providing sleeves in the end covers on DE & NDE (optional) |
| 15 | Brazing of new terminal leads from winding, its termination works (150 KW Instrument Air Compressor motor) (Optional) |
| 16 | Charges for overhauling of Service air compressor motor- 1C (150KW) |
| 17 | Labour required for Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides,checking of bearings housings, providing sleeves in the end covers on DE & NDE (optional) |
| 18 | Brazing of new terminal leads from winding, its termination works (150 KW Service Air Compressor motor) (Optional) |
| 19 | Overhauling of Vacuum pump motor -1A (93 KW) |
| 20 | Labour required for Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces on DE & NDE sides, checking of bearings housings, providing sleeves in the end covers on DE & NDE (optional) |
| 21 | Brazing of new terminal leads from winding, its terminal works (Optional). |
| 22 | Overhauling of Stator water pump motor - 1B (9.3KW) |
| 23 | Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side,checking of bearing housings ,providing sleeves in the end cover of one side (optional) |
| 24 | Overhauling of AC seal oil pump motor (5.5KW) |
| 25 | Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side,checking of bearing housings ,providing sleeves in the end cover of one side (optional) |
| 26 | Overhauling of Auxiliary Oil Pump (BFP) Motor-1C (5.5 KW) |
| 27 | Metal filling ,machining and repairing of worn out shafts/bearing seating surfaces of one side, checking of bearing housings ,providing sleeves in the end cover of one side (optional) |
| 28 | Overhauling of Jack oil pump motor-1A (30KW) |
| 29 | Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces of one side,checking of bearing housings ,providing sleeves in the end cover of one side (optional) |
| 30 | Overhauling of Debris Flushing Pump Motor -1A (11KW) |
| 31 | Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces of one side,checking of bearing housings ,providing sleeves in the end cover of one side (optional) |
| 32 | Overhauling of Priming Pump motor (11 KW) |
| 33 | Metal filling ,machining and repairing of worn out shafts / bearing seating surfaces of one side,checking of bearing housings providing sleeves in the end cover of one side (optional) |
| 34 | Removal of water line pipes, cooler assembly and lifting the cooler unit to a convenient location. |
| 35 | Cleaning the cooler tubes, checking the coolers by hydraulic testing, reconditioning of cooler flanges, replacement of gasket etc, |
| 36 | Lifting the cooler assembly ,fixing with motor and connecting the water line pipes, etc., |
| 37 | Material cost and fabrication of ACWP motor terminal bolts, nuts and washer. |
| 38 | Motor Terminal Block (110 KW). |
| 39 | Material cost and fabrication of SWBP motor terminal bolts, nuts and washer. |
| 40 | Motor Terminal Block (55 KW) |
| 41 | Material cost and fabrication of AWSP motor terminal bolts, nuts and washer. |
| 42 | Special Consumables 6318 C3 (for 100 KW DE & NDE Side)Make:NTN Imported; Cage: Steel |
| 43 | N 321 (for 150 KW DE Side)Make:NTN Imported; Cage: Brass |
| 44 | 6318 (for 150 KW NDE Side)Make:NTN Imported; Cage: Steel |
| 45 | 6319 C3 (for 110KW NDE Side & 93KW NDE side)Make: NTN Imported; Cage: Steel |
| 46 | NU 319 (for 93 KW DE Side)Make:NTN Imported; Cage: Brass |
| 47 | NU 319 (for 110 KW DE Side)Make: FAG; Cage: Brass |
| 48 | 6215 C3(for 55KW & 37KW NDE Side)Make:NTN Imported; Cage: Steel |
| 49 | NU 215 (for 55KW & 37KW DE Side)Make:NTN Imported; Cage: Brass |
| 50 | Consumable & T&P Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender