Tender For Mtps-I - Mill Plant- Unit-Ii- Overhaul Of Hot Air D Ers, Cold Air D Ers, Cold Air Gates, Hot Air Gate Power Cylinder & Renewal Of Hot Air Gate Seal During Annual Over Hauling Of 2026 - 27
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Oct 2026
13 days left
EMD
14400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mtps-I - Mill Plant- Unit-Ii- Overhaul Of Hot Air D Ers, Cold Air D Ers, Cold Air Gates, Hot Air Gate Power Cylinder & Renewal Of Hot Air Gate Seal During Annual Over Hauling Of 2026 - 27
BOQ
| Sl. No. | Item Description |
| 1 | Charges for opening the manhole doors, dismantling the cold air damper links, Shaft, flaps, cleaning the above, applying grease, changing if necessary and assembling the above parts and confirming free movement of flaps etc. |
| 2 | Overhauling of hot air dampers |
| 3 | Charges for dismantling the cold air gate, gear box, chain links and gates cleaning the above, applying grease changing the worn out parts and complete O/H of gear box and assembling the above parts and confirming free movement of gates etc. |
| 4 | Charges for cutting & removing the old eroded gate seal frame, arranging the new gate seals in orderly and seal welding to form leaf edge seal assembly in the HAG.(Top seal outer 2 Nos. per gate) |
| 5 | Renewal of Hot Air Gate seal by providing new/old SS seals[Top seals inner (2 sets. per gate)] |
| 6 | Bottom seals inner (2 Nos. per gate) |
| 7 | Left & Right side seals inner (4Nos per gate ) |
| 8 | Overhauling of Hot air gate power cylinder :Charges for dismantling from the frame, lower down the power cylinder and opening the top & bottom port square block and remove the piston shaft with flange, jam nut etc., after disconnecting the airline and supports |
| 9 | Charges for assembling of piston shaft, port flange, piston flange, working seals, air pipe lines, fitting the cylinder with frame and checking and setting the open close operation by setting the air pressure. |
| 10 | Charges for cutting & removing the existing worn out Hot air damper inner / Outer gland bush, grinding the bush seating surface and welding with new gland bush of size OD-60 mm x ID-50 mm x 62 mm length. |
| 11 | Charges for dismantling, reconditioning and reassembling of existing worn out hot air damper leaf holding regulating S.S.shaft. |
| 12 | Charges for cutting & removing the worn out M.S. plate of size 110 mm x 1300 mm x 12 mm thick x 3 Nos. plate (Left, Right & Bottom), grinding the cutting edges, cutting the new M.S. plate of size 110 mm x 1300 mm x 12 mm thick x 3 Nos. plate, drilling the dia. 14 mm holes x 9 Nos. for fixing hot air gate seals and refixing the new fabricated plate with proper clearance setting for in/outward of gate plate into seals for arresting the hot air leak. |
| 13 | Seals for Hot air gate : |
| 14 | Cost of 8 mm Graphite filed PTFE Square section Gland Rope. Champion Style-36 Grade or Equivalent |
| 15 | Seal kit for 1 No. Hot air gate pneumatic power cylinder (Cylinder bore size : dia. 200 mm) suitable for XRP 803 mills. |
| 16 | Cost of HT bolt of size : M12 mm x 75 mm, Full thread, Nut & Washer. |
| 17 | Cost of 12 mm thick M.S. plate |
| 18 | Cost of M.S. Welding electrodes |
| 19 | Cost of SS Welding electrodes |
| 20 | Cutting gas |
| 21 | Cost of new fabricated EN 08 material gland bush of size OD-60 mm x ID-50 mm x 62 mm length. |
| 22 | Charges for consumables and T& P’s Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender