Tender For Annual General Maintenance And Repair Of Civil Works In The Residences Of Personnels Of Hops Obra At Obra Residential Colony, Sonebhadra (U.P.)
Tender Value
11.99 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
24000
Bank guarantee accepted
Document Fee
1416
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonbhadra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual General Maintenance And Repair Of Civil Works In The Residences Of Personnels Of Hops Obra At Obra Residential Colony, Sonebhadra (U.P.)
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of fitter/plumber for non measured work in repair and maintenance work in internal /external water supply pipe line as per direction of engineer-in-charge with all T&P required (Labour rates only). |
| 2 | Engagement of carpenter for non-measured work in repair and maintenance of wood work as per direction of Engineer-in-charge with all T&P required (Labour rates only). |
| 3 | Engagement of helper/ Beldar for non-measured work such as helping carpenter, plumber and other miscellaneous work as per direction of Engineer-in-charge. |
| 4 | Excavation in foundation in soil mixed with moorum/ shingle/kankar requiring the use of special such T&P such as pickaxes, sabbals etc. including lift upto 1.5 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building & sides of the foundation. |
| 5 | Concrete with 4cm. gauge stone ballast down graded, coarse sand of 2.5 fineness modulus and cement in proportion of 1:3:6 in foundation and under floors including cost of all materials, labour, tools and plants etc. required for proper completion of work. |
| 6 | Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level |
| 7 | R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 for slabs with coarse sand excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. binding wire and also including cost of all materials. cost of binding wire, labour and T&P etc. required for proper completion of work. |
| 8 | 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in foundation and plinth including cost of all material, labour and T&P etc. required for proper completion of work. |
| 9 | 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than one brick thick. (230mm). |
| 10 | 1st class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than half brick thick. (115mm). |
| 11 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners Using flats 30x6mm for diagonal braces and central cross piece with all necessary fittings complete, including applying a priming coat of approved steel primer. |
| 12 | Steel reinforcement for R.C.C. work with TMT steel of grade Fe-500D or more including straightening, cutting, bending, placing in position and binding all complete and including supply of steel, its wastage, labour and T&P etc. complete . |
| 13 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. |
| 15 | 12mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 16 | 12mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 17 | 6mm thick plaster with cement mortar in proportion of 1:3 cement and coarse sand 2.5 fineness modulus on ceiling, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 18 | 12mm thick plaster finished with a floating coat of neat cement with cement mortar in proportion of 1:4 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. |
| 19 | 4cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement as specified and removing over lapping of mortar at the joints of the panels if any and giving them a uniform finish without base concrete including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 20 | Painting one coat of iron oxide/wood primer on new wood/iron surface including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc.required for proper completion of work. |
| 21 | Painting Two coat of superior quality of synthetic enamel paint approved make on New/ old wooden / iron surface including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 22 | Painting Every coat of Oil bond distemper of required shade over old treated surface including scraping and brooming the surface to remove all dirt, dust and other materials to give smooth surface including cost of all material, labour and T&P required for proper completion of work. |
| 23 | Every coats of White washing on old surface including cost of all material, T&P etc required for proper completion of work. |
| 24 | Finishing walls with water proofing cement paint on previously painted surface one or more coat including cost of all material, T&P etc required for proper completion of work. |
| 25 | Dismantling cement concrete or brick or granolithic floor, including base concrete and including disposal of dismantled material as directed by the Engineer-in-charge within a distance of 50 meters. |
| 26 | Dismentling of AC sheet roofing including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. |
| 27 | Repair of plaster in patches including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. depth, watering the area and then replastering of mix. 1:4 cement sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for completion of the work. |
| 28 | Providing and fixing of 32 mm dia P.V.C. waste pipe for sink or wash basin. |
| 29 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead as directed by Engineer-in-charge within a distance of 60 meters. |
| 30 | Providing kiln seasoned country wood work in frames of doors, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length as in chaukhats including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 31 | Providing and fixing kiln seasoned country wood in panelled or panelled and glazed 30 mm thick shutters for doors, windows with necessary screws all complete as per direction of Engineer-in-charge. |
| 32 | Providing and fixing ISI marked 30 mm thich flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:. |
| 33 | Providing and fixing fly/Mosquitos proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions and wood beading 62X19 mm with wire of dia 0.63 mm all complete. |
| 34 | Providing and replacing of following chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete. |
| 35 | L drops 16 mm Ø x 250 mm long |
| 36 | Tower bolts 10 mm Ø x 250 mm long |
| 37 | Tower bolts 10 mm Ø x 150 mm long |
| 38 | Iron Hinges 100 mm size & 12 gauge thick |
| 39 | M.S. Handles 125 mm size |
| 40 | Providing and fixing 15 mm nominal dia Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 41 | Providing & fixing 15 mm dia G.I. Pipe complete with G.I specials as bends, tee, sockets cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also in includes concealed G.I. fitting where required, cutting and making good the walls etc. and all material labour T&P etc. complete (internal work). |
| 42 | Supply and fixing of 15mm dia ball/float valve (brass) of approved quality, High or low pressure, with plastic floats complete including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 43 | Supply and fixing Brass bib cock heavy quality 15mm dia ISI marked including supply of all materials labour. T&P etc. required for the proper completion of the work. |
| 44 | Providing and fixing Brass stop cock 15 mm dia ISI marked heavy quality including supply of all material, labour and T&P required for proper complition of work. |
| 45 | Providing and fixing 15 mm dia C.P. Brass bib cock ISI marked heavy quality including supply of all material, labour and T&P required for proper complition of work. |
| 46 | Providing and fixing 15 mm dia C.P. brass long body bib/pillar cock of approved quality conforming to IS standards. |
| 47 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality including cost of all materials, labour and T&P etc. required for proper completion of work. |
| 48 | Providing and fixing 15 mm dia PTMT (Thermo-plastic) bib cock of approved quality and colour including replacing of old bib cock completed. |
| 49 | Providing and fixing 15 mm dia PTMT (Thermo-plastic) stop cock of approved quality and colour including replacing of old bib cock completed. |
| 50 | Providing and fixing 15 mm dia PTMT (Thermo-plastic) pillar cock of approved quality and colour including replacing of old bib cock completed. |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 52 | Providing and fixing on wall face/on ground unplasticised Rigid PVC rain water pipes of 110 mm dia P.V.C. pipe for rain water down pipe with specials such as tee, bend, socket, elbow etc. including cutting of pipe wherever necessary and including material, labour, T&P etc. required for proper completion of work. |
| 53 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 54 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including cost of all materials, labour and T&P etc. completion of work. |
| 55 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with P or S trap including all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including cost of all materials, labour and T&P etc. completion of work. |
| 56 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 57 | Supply and fixing P.V.C. low level flushing cistern 10 litres. Capacity complte with all accessories (Low level ) including all materials, labour and T&P etc. complete. |
| 58 | Providing and fixing wash basin White Vitreous China size 450x 300 mm with single 15mm C.P. brass pillar tap 32 mm waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including supply of all materials, labour and T&P etc. required for the proper complition of the work. |
| 59 | Providing and fixing stainless steel sink 610x460x200 mm heavy quality standard quality ISI marked including all materials, labours cartage T&P etc. required for the proper complition of the work.. |
| 60 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 61 | Attending to petty maintenance service like plumbing service,welder service, mansion service and carpenter service required as below. (Job attending by one no. Plumber/welder/mason /carpenter with one no. helper per hour or part of an hour.) |
| 62 | Steel work welded in built up gratings, frames, guard bar, ladder, railings, brackets, gates and similar sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 63 | Labour cess @ 1% on value of all above itemes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender