Tender For Special Repair To Roof Treatment At Main Bldgs Alongwith Addtn / Altn Of Ups Room At Hq Ddgsi And Provn Of Certain Minor And Revenue Works At Various Location In The Area Of Age Br-I Under Ge (East) Lucknow
Tender Value
49.01 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
20 days left
EMD
98200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Roof Treatment At Main Bldgs Alongwith Addtn / Altn Of Ups Room At Hq Ddgsi And Provn Of Certain Minor And Revenue Works At Various Location In The Area Of Age Br-I Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed. |
| 2 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 3 | Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in soft / loose soil complete all as specified and directed. |
| 4 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts, laying of cable etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 6 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 7 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 8 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed |
| 9 | M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 10 | M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 11 | M & L for providing plain cement concrete type B-0, 1:2:4, (using 12.5 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 12 | M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed. |
| 13 | M & L for providing plain cement concrete, type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges with and including necessary form work as required complete all as specified and directed. |
| 14 | M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed. |
| 15 | M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed. |
| 16 | M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed. |
| 17 | M & L for providing reinforced cement concrete nominal mix, 1:2:4, type B-1 using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed. |
| 18 | M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius built in cm 1:4 complete all as specified and directed. |
| 19 | M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 20 | M & L for brick work with sub class B bricks, straight or curved on plan any radius half brick thick wall, built in cement mortar 1:4 complete all as specified and directed. |
| 21 | M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed. |
| 22 | M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. |
| 23 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed. |
| 24 | M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed. |
| 25 | M & L for mild steel deformed or round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 26 | M & L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 27 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 28 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming to Fe 410-W(Gde E- 250) quality A complete all as specified and directed. |
| 29 | S & F of mild steel work in hand rail, half round or other stock section or core for fixing of wooden hand rails, bluster, running bars, nosing of steps, wind ties, post and struts for fencing, flat iron fillets and the like including necessary cutting, drilling holes, notching etc. as required conforming to Fe-410-W Grade E-290 complete all as specified and directed. |
| 30 | Supply only Chain link MS galvanisd fencing, any size or type made out of 3 mm dia GI wire to any type of standard, rails, straining bolts etc. complete all as specified and directed. |
| 31 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 32 | S & F of mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed ends to be fitted with washer and one hexagonal or square nut, not exc. 5cm long and dia of neck 11 to 15mm complete all as specified and directed. |
| 33 | S & F of rolled mild steel joist, channel, angle, flat iron or Tee sections, fixed independently without connecting plates etc. (cut to ordinary length i.e. within 20 mm of length) confirming to Fe-290 Grade E-165 complete all as specified and directed. |
| 34 | S & F of rolled mild steel sections as in main and cross beams, hip and jack rafter, purlins where connected to common rafters, running rails, guides for sliding doors fixed with angle cleat and other connecting plates conforming to Fe-290 Grade E-165 complete all as specified and directed. |
| 35 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 37 | S & F of factory made steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 38 | S & F of factory made steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, without glazing bars complete all as specified and directed. |
| 39 | S&F Colored Polycarbonate Sheets 6mm thick (multi wall) as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 40 | M & L for rendering 15 mm thick on brick work or concrete surface in cm 1:4 and finishing the surface even and fair complete all as specified and directed. |
| 41 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and fair complete all as specified and directed. |
| 42 | M & L for 15mm thick on concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and as directed.(Liquid water proofing compound to be measured paid separately) |
| 43 | Supply only Liquid water proofing compound complete all as spesified and directed. |
| 44 | M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed |
| 45 | M&L preparation of new plaster surfaces of wall/ceiling and applying two coats of distemper oil emulsion over one coat of wall care puty 2mm thick on walls with alkali resistant primer complete all as specified and directed. |
| 46 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 47 | M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 48 | M & L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 49 | M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed. |
| 50 | M & L for providing 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed. |
| 51 | M & L for Glazed ceramic tiles (coloured) in vertical surfaces 300x400x7-8mm or 600x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 52 | M & L for Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 53 | M & L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 54 | M & L for application of high perfomance hybride polyurea elastomeric water proofing coating cold applied, liquid membrane at 1.5 kg/Sqm with an elongation minimum of 500+100% by airless spray machine and tensile strength of minimum 11-13 N/mm2 as per ASTM D2370, crack bridging ability minimum of 3 to 4 mm as per ASTM C1305 , Shore Hardness of minimum 70+5 as per ASTM D2240 complete as per directed by Engr-In-Charge.The System shall also include final base preparation including cleaning of the plaster surface etc and applying epoxy primer as approved makes in two coats at a coverage of 0.40 kg/Sqm, etc as per manufacturer specification, complete all as specified and directed. Note:- The work petaining to water proofing treatment shall be executed for authorized applicator through manufacture of wich the materials is proposed to be used by the contrator and approved by Garrision Engingeer. |
| 55 | S&F 75x50mm single rebated factory made 100% solid WPC prelem both side (Wood Polymer Composit) door frame from 100% lead free ( Single & extruded process) material with dencity not less then 780kg /Cum complete all as specified and directed. |
| 56 | S&F Factory made 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both side 14 micron prelem Flush door shutter wit 10mm deep CNC moulding design of required size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 650 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 57 | Supply & fixing Factory made uPVC prelame colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 112 x 52mm & sash 42x 68 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed. Note: (a) uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.(b) Glass and wiremesh shall be measured and paid separately) |
| 58 | S & F of 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. |
| 59 | S&F 2nd class hard wood 35 mm thick Plain framed,factory made panelled shutter (two panels) with lock rail and panel of 9mm BWP comercial ply or 12mm vennered particle board with comercial veneering on both faces. The size of rail & stile as per IS: 1003, klin seasoned & chemically pressure treated complete all as specified and directed. |
| 60 | Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed. |
| 61 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed. |
| 62 | S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. |
| 63 | S & F of 200 mm long (Length of bolt) mild steel barrel tower bolt stove enamelled black with bright bolt complete all as specified and directed. |
| 64 | S & F of 250 mm long mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed. |
| 65 | S & F of 150 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed. |
| 66 | S&F Butt hinges 100 mm stainless steel hinges medium weight and fixed complete all as specified and directed. |
| 67 | S&F 125 mm stainless steel handles, oval type, stove enamelled black complete all as specified and directed. |
| 68 | S&F 150 mm long stainless steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 10mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 69 | S&F for stainless steel barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 70 | S&F for Vitreous china (Counter type) WHB White (C, size 380 x 380 x150 mm with waste coupling waste pipe of 32mm dia complete all as specified and directed. |
| 71 | M & L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 72 | S & F Vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe) and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete including flush pipes and all joints complete all as specified and directed. |
| 73 | S&F health faucet for EWC CP hand hold with flexible pipe 1.5m long complete all as specified and directed |
| 74 | M&L for Vitreous China urinals, pedstall type (Size 310x300x555 mm) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe and fixing of supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. |
| 75 | S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall complete all as specified and directed |
| 76 | S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and directed |
| 77 | S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed |
| 78 | S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed |
| 79 | S&F PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 80 | S&F glass corner shelf assembly consisting of 5.5mm thick sheet glass 250X250mm size fixed with chromium plated brackets complete all as specified and directed. |
| 81 | S&F glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed |
| 82 | S&F 125 mm dia CP brass shower rose incl shower arms with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed. |
| 83 | S&F 15mm dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, scresed down screwed for iron pipe or for brass ferrule and fixed both ends for iron pipe or for unions complete all as specified and directed |
| 84 | S&F brass chromium plated wall mixer for mixing hot & cold water with provn for overhead shower with 15mm long bend pipe complete all as specified and directed. |
| 85 | S&F brass chromium plated single hole basin mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality complete all as specified and directed. |
| 86 | S&F 15mm dia fancy type chromium plated angle cock/cast copper ally screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to GI Pipe complete all as specified and directed. |
| 87 | S&F CP brass towel rails 20 mm dia and 600 mm long fixed as in repair incl chromium plated brass screw and wooden / cleats complete all as specified and directed. |
| 88 | S&F PVC connection of 15 mm bore 600 mm long with brass coupling on both ends of superior quality and PTMT nuts fixed complete all as specified and directed. |
| 89 | Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling. complete as specified in SSR Part-I complete all as specified and directed |
| 90 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density Plastic ball Screwed for iron pipe and fixed (Minimum weight -210 gms) complete all as specified and directed |
| 91 | S&F 15 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors / walls complete all as specified and directed |
| 92 | S&F 20 mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors / walls complete all as specified and directed |
| 93 | S&F anodised aluminium ventilator fixed type weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 94 | Dismantling of bricks (laid flat or on edge) or brick tiles bedded and pointed in cement mortar as in floors, channels, kerbs, aprons etc complete all as specified and directed. |
| 95 | M & L for plaster by using readymix mixture of thickness 12 mm to 15 mm and with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints wall surface & disposal of rubbish complete all as specified and directed. |
| 96 | M&L for plaster by using ready mix mixture of thickness 12 mm to 15 mm thick with water proofing liquid and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish complete all as specified and directed. |
| 97 | M&L for Plastering by using ready mix mixture of thickness 5 mm to 7 mm on ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish complete all as specified and directed. |
| 98 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed. |
| 99 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) and area n.exc 1.5 Sqm each complete all as specified and directed. |
| 100 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover filltets complete all as specified |
| 101 | S&F for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2% , humidity S&F for Semi perfortated 12mm thick micro tegularedged or 10mm thick squre edged GRG(Glass Fibre Reinforced Gypsum) false ceilijng tiles at all heights with GRC false ceiling tiles of size 595x595 mm of approved texture design and patterns having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987. Noncmbustible as per BS476(para4 )-1970 and light reflectance of 85% ( minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 1200 mm and 3000 mm, cross-T of size 15x 32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to from grid module of size 600x600mm, suspended from ceiling using galvanizedmild steel items (galvanized @ 80 grams per sqm) i.e 50mm long 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level aduster of length and L- shape leveladjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0.40 of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center and 40mm long dry wall wood screw. The work shall be carried out as per direction of the Engineer-in-Charge |
| 102 | S&F 4 mm thick HPL board including alumium beading at corner and top of any design, fixed on wall as per manufacture instruction complete all as specified and directed. |
| 103 | S&F for 150/172mm dia, HDPE DWC Pipe As Per IS 16098 SN 8 in trenches and jointed complete all as specified and directed. |
| 104 | S&F for 200/230 mm dia, HDPE DWC Pipe As Per IS 16098 SN 8 in trenches and jointed complete all as specified and directed. |
| 105 | Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures(DBs,submain,cables etc) complete all as specified and directed. |
| 106 | Taking down carefully Ceiling fan/wall fan/Exhaust fan complete including all electrical fittings & fixtures etc and refixing after spray painting of 2 coats complete all as specified and directed. |
| 107 | Taking down carefully any Light fittings/fixtures any size complete including all (electrical fittings & fixtures etc) complete all as specified and directed. |
| 108 | Taking down carefully DB / VTPN of any type, any descrption including MCBs complete all as specified and directed.(Old unsv DBs and MCBs shall be measured seprately under respective item of Sch of Credit) |
| 109 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm and earth continuity conductor with 1.5 sqmm colour code drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes 1mm thick and modular cover plate with frame of approved colour for mounting modular switches, sockets etc as required for one light / fan point complete all as specified and directed. Note : Cost of moduler suken boxes, frame and cover plate of requiste module shall be deemed inclusive in quoted unit rate. |
| 110 | All as per Item No 109 hereinbefore but for One 5 A socket outlet on independent Board all as specified. |
| 111 | All as per Item No 109 hereinbefore but for One 5 A socket outlet on same Board all as specified. |
| 112 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm and earth continuity conductor with 2.5 sqmm colour code drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes 1mm thick and modular cover plate with frame of approved colour for mounting modular switches, sockets etc as required complete all as specified and directed. Note : Cost of moduler suken boxes, frame and cover plate of requiste module shall be deemed inclusive in quoted unit rate. |
| 113 | Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed. |
| 114 | Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed. |
| 115 | Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and directed. |
| 116 | Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and directed. |
| 117 | S&F Ceiling rose PVC polycarbonate complete all as specified and directed. |
| 118 | S&F modular type electronic fan regulator complete all as specified and directed. |
| 119 | Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95 complete all as specified and directed. |
| 120 | S&F LED security light fixture 35 Watt with powder-coated pressure die-cast aluminium body complete with electronic driver suitable for input voltage 140–270 Volts AC, 50 Hz, operating temperature –15°C to +50°C, provided with internal surge protection minimum 5 kV (L–N–E) as per IEC 61000-4-5, driver efficiency >85%, THD <10% as per IEC 61000-3-2, power factor ≥0.95, IP-66 protection and IK-10 impact resistance, CRI >80, system lumen efficacy ≥105 and <120 lm/W, with under-voltage and over-voltage protection, EMI/EMC compliance as per CISPR-15, and optical lenses for beam angle as per IESNA Type I / II / III, as required. The luminaire shall have minimum rated life of 50000 burning hours for LED with 70% lumen maintenance at end of life supported by LM-80 extrapolation and IES TM-21-11 report, CCT 5700K / 6000K / 6500K (ANSI bin), SDCM <5, and maximum power consumption not exceeding rated wattage. The fixture shall conform to relevant BIS standard and shall include all accessories, fixing arrangements, internal wiring with suitable size FRLS PVC insulated copper conductor cable, connections and earthing, complete in all respects and LM-79 and LM-80 test reports from NABL-accredited laboratory, as required under BIS for LED luminaires shall be submitted. |
| 121 | Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color complete all as specified and directed. |
| 122 | M & L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable using colour coding drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of nominal sizes 2x4 sqmm + 1x4 sqmm earth wire complete all as specified and directed. Note : (i) Cost of cutting & chasing for concealltion of conduit and making good as existing to distrubed surface shall be deemed inclusive in quoted unit rate. (ii) Three runs of 4 sqmm copper conductor and 01 run of PVC conduit shall be measured as one unit. |
| 123 | M & L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable using colour coding drawing into and including concealed rigid non metallic PVC conduit 25 mm dia, medium grade, ISI marked ivory colour along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth wire complete all as specified and directed. Note : (i) Cost of cutting & chasing for concealltion of conduit and making good as existing to distrubed surface shall be deemed inclusive in quoted unit rate. (ii) Three runs of 6 sqmm copper conductor and 01 run of PVC conduit shall be measured as one unit. |
| 124 | M & L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable using colour coding drawing into and including concealed rigid non metallic PVC conduit minimum 25mm dia, medium grade, ISI marked ivory colour along with accessories of nominal sizes 4x10 sqmm + 1x10 sqmm earth wire complete all as specified and directed. Note : (i) Cost of cutting & chasing for concealltion of conduit and making good as existing to distrubed surface shall be deemed inclusive in quoted unit rate. (ii) Five runs of 10 sqmm copper conductor and 01 run of PVC conduit shall be measured as one unit. |
| 125 | M & L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable using colour coding drawing into and including concealed rigid non metallic PVC conduit minimum 25mm dia, medium grade, ISI marked ivory colour along with accessories of nominal sizes 4x16 sqmm + 1x10 sqmm earth wire complete all as specified and directed. Note : (i) Cost of cutting & chasing for concealltion of conduit and making good as existing to distrubed surface shall be deemed inclusive in quoted unit rate. (ii) Four runs of 16 Sqmm and one run of 10 sqmm copper conductor and 01 run of PVC conduit shall be measured as one unit. |
| 126 | S & F factory made powder coated distribution board SP & N 8 way double door fabricated of CRCA sheet with metal door (IP-43 protection) bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one SPN as a incomer and 6 MCBs conforming to IS: 8623 along end box for above DB including necessary civil works complete all as specified and directed. |
| 127 | Supply and fix of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:-(a) MCCB, 160 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN, AC, 240 volt of 40 Amp, \\"C\\" curve, 10 KA breaking capacity - 08 Nos. |
| 128 | Supply and fix MCB SP 230V, 6-32 Amps capacity complete all as specified and directed. |
| 129 | Supply and fix MCB SPN 230V, 10-32 Amps capacity complete all as specified and directed. |
| 130 | S & F MCB Single Pole & Neutral MCB 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified & directed. |
| 131 | S & F TPN MCB 100 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified & directed. |
| 132 | S & F TPN MCB 63 Amps, 240 v, 50 Hz AC Made from moulded self extinguishing thermostat plastic and suitable for 'C' curve, 10KA breaking capacity complete all as specified & directed. |
| 133 | Supply and fix Modular PVC enclosure for AC with a two pin and earth plug and socket complete with one 32 amps SPN minitrip MCB complete all as specified and directed |
| 134 | Supply and fixing Airfreshner / Exhaust fan 250mm PVC Body complete with all accessories, 230 V, Single phase complete all as specified and directed. |
| 135 | Supply and fixing Exhaust fan steel body 380/450 mm sweep working on single phase supply incl. all accessories including electrical connection with required wire complete all as specified and directed. |
| 136 | Supply and fixing stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Litre to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body,Product warranty-2 Years, Heating element warranty-4 Years, Inner Tank warranty-7 Years, including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, complete all as specified and directed. |
| 137 | Supply and laying XLPE Insulated armoured electric heavy power cable with aluminium stranded conductor ,1100 volts grade, cross sectional area 25sqmm x 2 core complete all as specified and directed. |
| 138 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core all as specified and as directed by the Engr-in-Charge. |
| 139 | Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete all as specified. |
| 140 | M&L laying well burnt old size bricks, sub class \\"B\\" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified. |
| 141 | Supply & fix HDPE pipe DWC grade 80mm bore in trench/ wall/floor for protection of Cable including making good of the distubed surface all as specified and directed. |
| 142 | Material and labour Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS rounds 1.5 kgs, funnel, watering pipe etc. all specified and directed including testing on completion complete all as specified and directed. |
| 143 | M & L for chemical Earthing complete with Copper plate 600 x 600 x 3 mm buried directly in the ground vertically to depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, depth not less than 1.5 Mtr below the ground level connected to copper strip of 20 mm x 3 mm size by means of bolts, nuts and washers , returning & filling the pit with excavated soil mixing with charcoal 250 KG ,crystal salt 200 KG , magnesium sulphate of 100 KG and vegitable soil all around the plate up to 350 mm above from top edge of plate and balance portion filling with excavated soil in layers not exceeding 25mm thick, 25 mm galvanized iron medium grade watering pipe up to top of plate ,50 mm bore galvanized iron light grade pipe for earth strip protection , including all excavation earth work in any type of soil ,PCC 1:3:6 type C1 for chamber of internal size 300 mm X300X300mm with 120 mm thick wall and 700 mmX700mmX150 mm thick ,bed concreate,RCC 1:2:4,type B1 for precast chamber cover 50 mm thick ,reinforced with welded steel wire fabric of XPM jali (weight not less than 4.00 Kg/sqm),funnel,with wire mesh, complete al as specified and directed. Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and copper strip shall be deemed to be included in unit rate quoted by tenderer. |
| 144 | Supply and fix copper strip of size 20 x 3.0 mm with saddles and fixing screws etc for roof conductors and down conductors above ground level complete all as specified and directed. |
| 145 | Supply & fix sheet metal enclosure indoor type of size 0.9 x 0.9 x 0.2 mtr suitable to fix on wall/floor made out of 2mm thick CRCA sheet having independent compartments suitable for single phase energy meters and MCB provided with front hinged shutters with lockable arrangements and clear glass to visualize the meter reading without opening the compartment with sufficient working space in compartment prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of suitable size from bus bar to meter compartment 04 Nos duly crimped with copper thimbles, duly powder coated complete all as specified and directed and consisting with the following :- (a) Copper Bus bar for 3 phase 4 wire system of 4 x 200 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front openable shutter - One set.(b) incoming MCCB, four pole, 415 volts, 125 Amps, 25 KA with adjustable Overload setting Ir = (0.8 to 1.0)xIn - One No. (c) outgoing MCB SPN, 40 Amp,10 KA C-Curve - 04 Nos. (d) Multifuction meter(0-500) Volts with inbuilt selector - One set.(e) Indicator Lamps LED in Red in Red/ Yellow/ Blue colour - One Set of Three. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender