Tender For Special Repairs To Trainees Offrs Md Accn Bldg No P-316 Vidya Vihar (04 X Quarters) At Eme School , Vadodara.
Tender Value
66.11 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
5 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Trainees Offrs Md Accn Bldg No P-316 Vidya Vihar (04 X Quarters) At Eme School , Vadodara.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Oct-2026 | Corrigendum | Other | 29-Oct-2026 |
| 2 | 29-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. |
| 2 | Roughening of old unservicable PCC floor surface by picking, chipping and wire brush sweeping clean and washing down with water to remove dust outside to make it suitable for laying floor tile complete all as specified. |
| 3 | M&L for non skid ceramic tile 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm , as in floors etc set over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge) |
| 4 | M&L for non skid ceramic tile 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm , as in floors etc set over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge) |
| 5 | M&L for Virified Ceramic tiles 9 to 10 mm thick any type of shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:6 |
| 6 | M&L for Virified Ceramic tiles 9 to 10 mm thick any type of shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:3 |
| 7 | M & L for Glazed ceramic coloured walls tiles in vertical surfaces 300x450x 6mm to 7 mm thick set over and including rendering on vertical surface of wall or concrete surfaces in CM 1:3 to receive wall tiles including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge). |
| 8 | M & L for 18 to 20 mm thick machine cut green marbel stone in single piece as in steps and risers, landings, jambs, pillars, window cills, and like laid over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick plastering with cement mortar 1 : 3 including necessary adhesive complete all as specified |
| 9 | M&L Granite (of any type and colour) work (table rubbed and polished) 18 to 20mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed. |
| 10 | Rounding to edges of stone slabs such as steps cooking platefrom and other similar situations complete all as specified |
| 11 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each |
| 12 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each |
| 13 | M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE. |
| 14 | S & F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut ,mitered and moulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 15 | S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 16 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubularsections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 17 | S&F 4.00mm+/-0.20mm thick tinted glass of bronze colour , selected ordinary quality and glazing with rubber beading or with glazing clips exc 0.5 sq. m in each pane as per instructions of manufacturers, all as specified and directed. |
| 18 | S&F 4.00mm thick figured glass, pin head type and glazing with rubber beading or with glazing clips n exc 0.5, all as specified and directed. |
| 19 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 20 | S & F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolt, if required hooks (stay), heavy for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps hold fasts, wall ties, hooks for hanging fans, plain angles cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 310-O or Fe 410-O |
| 21 | M & L Cement concrete type B1, 1:2:4 (20 mm graded aggregate) as in coping, bed plate for hold fast etc. |
| 22 | M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed. |
| 23 | M&L for 75mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed. |
| 24 | S & F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed |
| 25 | S & F 150 mm size extruded aluminium alloy handles, febricated type anodised |
| 26 | S&F in repair 18mm thick HDHMR BOARD exterior grade including one side any coloured and other side white colour prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. |
| 27 | S&F in repair 18mm thick HDHMR BOARD exterior grade including both side white coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. |
| 28 | S&F in repair stainless steel cabinet/drawers handle having a length of 100mm and shape all as specified and directed. |
| 29 | S&F in repairs SS 304 Cup & Saucer basket of size 470x485x100mm corrosion resistance telescopic drawer channel all as specified and directed. |
| 30 | S&F SS 304 Perforated cutlery basket of size 470 485x100mm corrosion resistance telescopic drawer channel all as specified and directed. Make: cat part no 5914 of Godrej or other equivalent as approved by GE. |
| 31 | S&F SS 304 Three shelf pull out of size 200x485x530mm corrosion resistance telescopic drawer channel all as specified and directed. |
| 32 | S&F SS 304 Grain trolly of size 525x485x350mm corrosion resistance telescopic drawer channel all as specified and directed. |
| 33 | S&F Thali Plate basket SS 304 - 21*20 of size 8- 520x485x150mm corrosion resistance telescopic drawer channel all as specified and directed. |
| 34 | S&F Plain Basket SS 304 of Size 470x485x200mm corrosion resistance telescopic drawer channel all as specified and directed. |
| 35 | S&F anti rusting stainless unik cloth drying hanger made of 16mm dia hollow stainless rod , 8 feetx6 rods set for heavy duty including fixing on ceiling with metal roof clamps all as specified and directed and approved by GE. |
| 36 | S&F in repairs Ball Bearing drawer channel(Black powder coated) 250mm of size as approved by GE. |
| 37 | S & F SS W Hinges SS 202 Grade steel Rust Resistance , for fixing cup boards shutters sizes of hinges 3\\" to 4\\" and 1.5 mm thickness, suitable for 18 mm thick cabinets shutters complete all as specified and directed |
| 38 | S&F magnet door stopper of rectangular size for PVC cabinets including all fittings fixed complete all as specified and directed. |
| 39 | S & F 250 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters |
| 40 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).property of being ermite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/SS dash fasteners of required dia and length all as specified and directed. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)SS screws complete all as specified and directed. |
| 42 | S & F tubular curtain rails 25mm dia stainless steel 202 grade drapery type complete all as specified directed |
| 43 | S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed |
| 44 | S & F in repairs 20mm dia brass chromium plated tubular towel rail complete. |
| 45 | S & F rolled mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 46 | Remove water tank caging of iron during waterproofing treatment and refix on the same location ,all as specified and directed by Engr-in-charge |
| 47 | M & L in repair for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework (caging) of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed |
| 48 | M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 49 | M & L for preparing new steel surface of any description not otherwise described n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 50 | M & L for preparing old steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 51 | M & L for preparing new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 52 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 53 | S & F 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 54 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MOD land all as directed by Engr-in-Charge. |
| 55 | S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed. |
| 56 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MOD land all as directed by Engr-in-Charge. |
| 57 | S & F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed. |
| 58 | S & F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed. |
| 59 | S & F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 60 | S & F in repairs 110mm bore PVC (SWR) bends any radius all as specified and as directed. |
| 61 | S & F in repairs 110mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed. |
| 62 | S & F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed. |
| 63 | S & F in repairs 75mm bore PVC (SWR) bends any radius all as specified and as directed. |
| 64 | S & F in repairs 75mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed. |
| 65 | S & F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed. |
| 66 | S & F in repairs 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed |
| 67 | S & F in repairs 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed |
| 68 | S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe all as specified and as directed |
| 69 | S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe all as specified and as directed |
| 70 | S & F 110mm PVC (SWR) vent cowl all as specified and as directed |
| 71 | S & F 75mm PVC (SWR) vent cowl all as specified and as directed |
| 72 | S & F in repairs 15mm bore chromium plated fancy type bib tap long body, screwed down, high pressure for iron pipe or for brass ferrule |
| 73 | S & F CP wall mixer with bend pipe for overhead shower for mixing hot and cold water screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed. |
| 74 | S & F in repairs stop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed |
| 75 | S & F in repairs 25mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed |
| 76 | S & F in repairs 20mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed |
| 77 | S & F in repairs 125mm dia chromium plated shower rose with swivel joints including fixing to steel pipe or GI union complete |
| 78 | S&F 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgf/cm2 as in waste pipe |
| 79 | Dismantling of water storage tank of 500 ltrs to 1000 ltrs capacity. |
| 80 | S & F 500 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 81 | S & F 1000 Ltrs Rotational moulded polyethylene water storage tanks three layered (white colour)with tank adapter (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 82 | S & F in repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screwed for iron pipe or brass ferrule and fixed |
| 83 | S&F in repair Vitreous china premium/ 1st quality wash down water closet Wash down water closet wall hung type EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified etc. complete including making good to floor. complete all as specified and as directed. |
| 84 | S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 85 | S&F in repairs Vitreous China wash down water closet (Squat pattern ) white complete as fixed in repair excluding flushing cisternand flush type \\"Orrisa\\" pattern size 580x440 with integral footrest inject connection to trap antisyphonage etc complete including joint between flushing pipe and socket of WC. |
| 86 | S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band (flush pipe) 32mm complete all as specified. |
| 87 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 88 | S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed. |
| 89 | S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed. |
| 90 | S & F 110mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal all as specified and as directed. |
| 91 | S & F 75mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal all as specified and as directed. |
| 92 | S&F in repair vitreous china Wash hand basin, white , flat back size 550x400 mm except taps, CP waste coupling but incl brackets all as specified. |
| 93 | S&F in repair brass CP centre hole basin mixer with 450 mm braided connection pipe (without pop-up) for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete. |
| 94 | S & F 32 mm dia stainless steel waste coupling for wash hand basin all as specified and directed. |
| 95 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm |
| 96 | S&F in repairs 350x450mm size cabinet mirror rectangular shape with 4mm thick selected quality mirror and PTMT frame with openable door shutter with PTMT frame outside mirror as complete |
| 97 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 98 | Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work |
| 99 | M&L Cement concrete type B1 1:2:4 (20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges. |
| 100 | Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc. |
| 101 | Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, |
| 102 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 |
| 103 | S&F 40mm bore UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe |
| 104 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement) |
| 105 | M&L Rendering in two layer on fair faces of brick work or concrete sur-faces of wall 5 mm thick in CM 1:4 mixed with WPC as per manufacturers instructiion for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately). |
| 106 | M&L Rendering 5 mm thick on fair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) |
| 107 | M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed. |
| 108 | M & L for preparation of new plastered surfaces and applying three coats of white wash matching to existing of wall surface. |
| 109 | M& L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 110 | M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash. |
| 111 | M & L for Complete removal of exiting treatment from wall and preparation of old surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed. |
| 112 | M& L for Complete removal of exiting treatment from wall and preparation of old surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 113 | M & L for Complete removal of exiting treatment from ceiling and preparation of old surfaces of ceiling and applying three coats of white wash. |
| 114 | M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia, roof bands etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required complete and applying three coat of white wash/two coat of cement base pint to match with the existing surface as directed by the Engr- in -Charge . (Reiforcement will be measured and paid saperately under respective item. |
| 115 | M&L for Providing precast cement concrete Type B1, 1:2::4 (using 20 mm Aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to matchcomplete all as specified and directed. (reinforcement shall be measured and paid separately) |
| 116 | M&L for Providing reinforced cement concrete (nominal mix) Type B1, 1:2::4 (using 20 mm Aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and directed. Note. (reinforcement shall be measured and paid separately) |
| 117 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specifed and as directed. |
| 118 | M & L for complete removal of existing water proofing treatment including PCC tiles, plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge |
| 119 | Complete removal of existing water proofing treatment including plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge |
| 120 | M&L for 40 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr mixed with WPC as per manufacturer's instructions of cement finished surface even and fair without using extra cement for laying of WPT all as specified and directed. (WPC will be measured and paid separately). |
| 121 | M&L 10mm thick rendering on roof in CM 1:3 mixed with WPC as per manufacturer's instructions of cement for finished even and smooth without using extra cement over PCC surface for laying APP membrane on roof (WPC will be measured and paid separately). |
| 122 | M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.40 Ltrs/Sqm, 3 mm thick APP modified polymeric membrane of weight of 3 kg/sqm with non-woven polyester reinforcement shall be laid over a coat of bitumen S-35 grade (30/40) applied @1.20Kg /Sqm (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps, joints & overlaps shall be sealed and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete all as specified and directed by Engr-In-Charge (Note: the primer and the membrane to be used shall be of the same manufacturer and to be applied by authorized applicator of OEM). |
| 123 | M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.40 Ltrs/Sqm, 3 mm thick APP modified polymeric membrane of weight of 3 kg/sqm with non-woven polyester reinforcement shall be laid over a coat of bitumen S-35 grade (30/40) applied @1.20Kg /Sqm (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps, joints & overlaps shall be sealed complete all as specified and directed by Engr-In-Charge (Note: the primer and the membrane to be used shall be of the same manufacturer and to be applied by authorized applicator of OEM). |
| 124 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 10 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 125 | Supply only Internal water proofing compound (Liquid type) all as specified and directed. |
| 126 | Demolition of existing PCC/lean concrete including floor tiles and removing rubbish off the premises. |
| 127 | M&L for 15 mm thick plaster in sunken portion with CM 1:3 mixed with liquid water proofing compound as per manufacturers instruction and should be even and smooth without using extra cement all as directed. Note . (WPC will be measured and paid separately). |
| 128 | M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.40 Ltrs/Sqm, 3 mm thick APP modified polymeric membrane of weight of 3 kg/sqm with non-woven polyester reinforcement shall be laid over a coat of bitumen S-35 grade (30/40) applied @1.20Kg /Sqm (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps, joints & overlaps shall be sealed complete all as specified and directed by Engr-In-Charge (Note: the primer and the membrane to be used shall be of the same manufacturer and to be applied by authorized applicator of OEM). |
| 129 | M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete all as specified and as directed. |
| 130 | M & L for 25 mm thick cement concrete in flooring type Bo, 1:2:4 (12.5mm graded aggregate) with liquid water proofing compound as per manufacturers instructions for laying floor tiles. Note (WPC will be measured and paid separately). |
| 131 | S& F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 132 | M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/CICO/PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm (average) all as per manufactureres instruction.(Upto 10 m height) |
| 133 | S& F mild steel welded fabric of weight exe 2.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified and as directedby Engineer-in Charge.(Upto 10 m height) |
| 134 | Demolition of cement concrete of any description and in any position not otherwise specifically provided. |
| 135 | M & L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in paving finishing cone surface (plinth protection) even and smooth without using extra cement. |
| 136 | S&F in repairs grating 150mmx150mm made out of stainless steel complete all as specified and directed. |
| 137 | S&F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 138 | Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc. |
| 139 | Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity. |
| 140 | M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete incl cutting and chasing in stone/brick masonry all as specified and directed by Engr-in-charge |
| 141 | For one light, fan point controlled by one switch |
| 142 | For one call bell point controlled by one push button switch. |
| 143 | For one 5 Amp independent socket point controlled by one switch |
| 144 | For one 3 pin ,5 Amp socket point with other switch on the same board |
| 145 | For one light, point controlled by two way switch |
| 146 | All as per item No 140 here in before but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by engir in charge. |
| 147 | S&F Modular switch, one way, 6 Amp 230, 1 module. All as specified and directed by Engr in charge. |
| 148 | S&F Modular switch, two way, 6 Amp 230, 1 module.All as specified and directed by Engr in charge. |
| 149 | S&F socket Modular 6 Amp-2/3 pin combined 2 module .All as specified and directed by Engr in charge. |
| 150 | S&F switch Modular, single pole, one way, 16 Amp,1 module 230 Volt . All as specified and directed by Engr in charge. |
| 151 | S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt . All as specified and directed by Engr in charge. |
| 152 | S&F ceiling rose, surface backlit,three terminal..All as specified and directed by Engr in charge. |
| 153 | S&F Modular lamp holder insulated with back plate suitable for Angle/Batten fitting .All as specified and directed by Engr in charge. |
| 154 | S&F modular fan step regulator 120W, 2 module. All as specified and directed by Engr in charge. |
| 155 | S&F modular bell push 6A ,1 module. All as specified and directed by Engr in charge. |
| 156 | S&F call bell ding dong 230 Volt , single phase. All as specified and directed by Engr in charge. |
| 157 | Supply and fixing LED batten lights fitting made of Aluminium extrusion 1x 20W (4 feet) , input voltage 140-270 V AC,CCT 6500K, Lumin efficency 100 lm/watt ,surge protection upto 4KV , Voltage protection upto 440 V AC.PF >0.9 , connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr -in -charge.Note :-Warrenty on light should be of minimum 02 Years provided by the contractor. |
| 158 | Supply and fixing LED batten lights fitting made of Aluminium extrusion 1x 10W (2 feet) , input voltage 140-270 V AC,CCT 6500K, Lumin efficency 100 lm/watt ,surge protection upto 4KV , Voltage protection upto 440 V AC.PF >0.9 , connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr -in -charge.Note :-Warrenty on light should be of minimum 02 Years provided by the contractor. |
| 159 | Supply and fixing LED light fitting Decorative wall mounting brushed nickel finish with acrylic diffuser suitable with 9 watt led lamp B22 base all as specified and Directed by Engir in charge. |
| 160 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 161 | Supply & fix of exhaust fan steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, voltage 230V, 50Hz, RPM 1200, copper winding complete including exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV exhaust fan complete all as specified and directed.Note : 1) Old unserviceable Exhaust fans shall be deposited to AGE E/M store yard for re issue to other buildings after repair/servicing or suryed off as per procedure in vogue etc. |
| 162 | Supply & fix of exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 250mm including exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV exhaust fan complete all as specified and directed.Note : 1) Old unserviceable Exhaust fans shall be deposited to AGE E/M store yard for re issue to other buildings after repair/servicing or suryed off as per procedure in vogue etc. |
| 163 | M&L electric water heater (Geyser) 25 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. |
| 164 | S&F LED bulb 10 watt suitable for angle / batten holder fitting. |
| 165 | S & F of BLDC White colour ceiling fan complete with blades and antisuside rod from existing roof / trus to fall ceiling, and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE,Winding material 100 % copper ,350RPM air velocity 215m3/min,anti rust blades five star rated with brushless direct current motor including ceiling fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV ceiling fan complete all as specified and directed.Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard for re issue to other buildings after repair/servicing or suryed off as per procedure in vogue etc.2). 02 years guarantee to be provided by the contractor. |
| 166 | Taking down and refixing connecting electric meter any type incl S & F suitable board close recessed type of suitable size All as specified and directed by Engir -in-Charge |
| 167 | M&L concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLSH, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge |
| 168 | M&L concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLSH, 04 runs of 01 Single core of size 10 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 10 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge |
| 169 | S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs..All as specified and directed by Engr in charge. |
| 170 | S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs. .All as specified and directed by Engr in charge. |
| 171 | S&F double door metallic sheet metal enclosure for MCB DB double door TPN 4 Way 415 Volts with 200 Amps rated bus bars including taking down. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate . |
| 172 | S&F testing and commissioning of MCB TPN 63 A ,415 volt 50 Hz,10ka in accordance with IEC 60947- 2 having C-curve characteristics connected with suitable lugs.All as specified and directed by Engr-in charge |
| 173 | S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as directed by Engineer-in-Charge |
| 174 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 175 | M&L for GI pipe bracket of size 40 mm dia medium grade of length not less than 1.5 Mtr long and bent to a shape incl fixing wall with 02 Nos MS flate clamp of suitable size incl nut bolt and washers complete all as specified and as directed. |
| 176 | M&L for the GI tubing of size 40 mm bore, medium grade, ISI marked with all GI fittings (medium grade) incl laid in trenches , floor ,walls etc complete all as specified and directed . |
| 177 | S&F the Gun metal Gate valve iron wheel head both end screwed of size 40 mm bore for iron pipe approved all as specified and directed. |
| 178 | Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.5 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron medium grade pipe 40mm bore in wall/floor/and GI Pipe 20 mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 3 of SSR 2009 ( Part-I).Notes (a) The unit rate shall include for GI protection pipe, GI watering pipe, wire mesh, funnel and excavation, RCC pit cover, test point, galvanised iron strip from top of earth plate upto 7.5 metres above ground level and if GI protection pipe is less than 7.5 metres, no price adjustment shall be made.(b) PCC pit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc shall be deemed to be included in the unit rate.(c) If the testing result of earthing is not found below 3 Ω then the contractor shall do another earthing work at his own cost and nothing shall be permissible on this account.(d) Earthing work will be carried out in presence of MES representative. |
| 179 | NOTE : SCHEDULE OF CREDIT (Amount on page No 51 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 05, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender