Tender For Ow To Upgradation And Maintenance Of Circle Office, Chandigarh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Oct 2026
16 days left
EMD
44250
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ow To Upgradation And Maintenance Of Circle Office, Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Description and specification of items of work to be executed (complete work) |
| 2 | Supply and installation of Godrej Compactor Storage System (Mobile Compactor) colour Warm Grey Size 2047H x 1200W x 800D complete with rails, locking arrangement and all accessories of approved model and capacity. |
| 3 | Provision for upgradation and replacement of damaged/unserviceable sanitary fixtures and CP fittings in washrooms of office. (White vitreous china flat back type lipped front urinal basin of 430x260x350mm size with 5 Litre white P.V.C. automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps) |
| 4 | Provision for upgradation and replacement of damaged/unserviceable sanitary fixtures and CP fittings in washrooms of office. (20mm nominal diauplasticised PVC connection pipe 45 cm length with brass unions) |
| 5 | Provision for upgradation and replacement of damaged/unserviceable sanitary fixtures and CP fittings in washrooms of office. (15 mm nominal dia C.P. brass angle valve) |
| 6 | Provision for upgradation and replacement of damaged/unserviceable sanitary fixtures and CP fittings in washrooms of office. (Flexible PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm) |
| 7 | Provision for upgradation and replacement of damaged/unserviceable sanitary fixtures and CP fittings in washrooms of office. (C.P. Brass Waste Coupling 31mm dia) |
| 8 | Provision for upgradation and replacement of damaged/unserviceable sanitary fixtures and CP fittings in washrooms of office. (125 mm dia C.P. brass drain grating) |
| 9 | Provision for upgradation and replacement of damaged/unserviceable sanitary fixtures and CP fittings in washrooms of office. {15 mm dia CP brass single lever/single hole basin mixer of approved make (Jaquar, Hindware, Cera or equivalent)} |
| 10 | Supply and installation of 3-Star BEE Rated Inverter spilit Air Conditioner of Make-Bluestar, Voltas, Diakin etc. (reputed brand) alongwith supply of outdoor stand, copper cable and refrigerant pipe work as required with closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units. (1.5 TR - HI-WALL TYPE + Cordless Remote) |
| 11 | Supply and installation of 3-Star BEE Rated Inverter spilit Air Conditioner of Make-Bluestar, Voltas, Diakin etc. (reputed brand) alongwith supply of outdoor stand, copper cable and refrigerant pipe work as required with closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units. (2.0 TR - HI-WALL TYPE + Cordless Remote) |
| 12 | Supply and installation of 1.5 TR, 3-Star BEE Rated Inverter Window Type Air Conditioner of Make-Bluestar, Voltas, Diakin etc. (reputed brand) complete with cordless remote, copper power cable as required, mounting arrangement, all standard accessories. |
| 13 | Providing and fixing Wall Mounted Storage Cabinets of size 0.60x0.90m, made of 18mm BWR Plywood/PVC Board with laminate fininsh and edge banding, 2 shelves, toughened glass shutters, SS fittings and hardware complete for installation near RO/drinking water area |
| 14 | Providing and fixing weatherproof 3mm fibre reinforced sheet shed size 2.40m(L) x 1.80(W) x 2.10m(H) over the existing ceiling opening using 50x50x3mm MS SHS pipes for supporting framework and vertical legs, including fixing fibre reinforced sheets on the top and three sides, complete with anchor fasteners, welding, one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint to exposed steel surfaces, including all labour complete. |
| 15 | Providing and fixing 300x10mm aluminium tower bolts,ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 16 | Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 17 | Demolishing brick work manually/ by mechanical means in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 18 | Provision for 20mm cement plaster of mix 1:4 (1 cement :4 coarse sand) with curing complete. |
| 19 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 20 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 21 | Provision for fixing and aligning existing aluminium door with frame in the newly formed opening, including drilling, fixing with dash/anchor fasteners, sealing gaps with approved sealant, making good the jambs and all incidental works complete. |
| 22 | Machine grinding, cleaning and mirror polishing of existing Kota stone/Marble flooring of stairs using diamond abrasives of suitable grit, polishing compound, buffing and final cleaning to restore the original finish, complete as directed by the Engineer-in-Charge. |
| 23 | Providing and erecting straight MS staircase 900 mm wide for access to terrace, comprising main stringers of 200 × 75 × 25 mm MS Channels, tread support framework of 50 × 50 × 5 mm MS Angles, front edge stiffeners of 50 × 50 × 5 mm MS Angles, intermediate stiffeners of 40 × 40 × 5 mm MS Angles, treads of 6 mm thick MS chequered plate, handrails of 48.3 mm outside diameter MS pipe on both sides, vertical balusters of 40 × 40 × 3 mm MS Square Hollow Sections at suitable spacing, 10 mm thick MS base plates, anchor fasteners, welding, cutting, grinding, one coat of red oxide primer and two coats of synthetic enamel paint, complete in all respects as directed by the Engineer-in-Charge. |
| 24 | Supply and fixing of 25mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 25 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (PVC insulated copper single core cable 1.5 sqmm for circuit/submain wiring) |
| 26 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (PVC insulated copper single core cable 2.5 sqmm for circuit/submain wiring) |
| 27 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (GI box alongwith modular base & cover plate in recess 6 module (200mm x 75mm) |
| 28 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (GI box alongwith modular base & cover plate in recess 8 module (125mm x 125mm) |
| 29 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (5/6 A modular Switch) |
| 30 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (15/16 A modular Switch) |
| 31 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (3 pin 5/6 A modular Socket outlet ) |
| 32 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (6 pin 15/16 A modular Socket outlet) |
| 33 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (Modular Blanking plate) |
| 34 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (Modular stepped type electronic fan regulator) |
| 35 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (GI box with modular plate and cover in recess including 25 A modular socket outlet and 25 A modular SP MCB) |
| 36 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (1200 mm sweep, EPNX regular ceiling fan, 3 nos. blades, 30 cm long down rod) |
| 37 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (Exhust fan upto 300mm sweep plastic) |
| 38 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (LED panel surface light 24 watt make: havells/crompton/Phillips) |
| 39 | Providing and fixing of following electrical fittings, drawing of electrical wires and cables in PVC conduits, switch/sockets, LED lights etc. including connections, testing etc. as required. (LED Tubelight 20 watt make: havells/crompton/Phillips) |
| 40 | Supply and installation of 3.5 KVA/ 48 V Sine wave Invertor and 2 Nos. of Tall Tubular Batteries with Capacity of 240 Ah of make Luminous, Exide, Livguard etc. (reputed brand) along with Trolley of appropriate size for housing the Inverter and Batteries. |
| 41 | Providing and fixing CURTAIN VIRTICAL BLINDS suspended from powder-coated aluminium head rail, operating chain mechanism, bottom weights, end caps, brackets, fixing clips and all other necessary accessories, complete with drilling, fixing, alignment of approved fabric, colour, design as per direction of Engineer-in-charge. |
| 42 | Provision for Refilling, servicing, pressure testing and certification of ABC Type Fire Extinguisher Cylinder of following capacity. (9 KG Capacity) |
| 43 | Provision for Refilling, servicing, pressure testing and certification of ABC Type Fire Extinguisher Cylinder of following capacity. (5 KG Capacity) |
| 44 | Providing and fixing sliding type MS access door for ceiling opening of size 1200 × 900 mm, fabricated from 40 × 40 × 3 mm MS square hollow section frame with 2.0 mm thick MS sheet welded over the frame, mounted on heavy-duty ball bearing sliding rollers running over two 50 × 50 × 6 mm MS angle guide rails fixed to the existing RCC slab, including stopper arrangement, pull handle, locking arrangement, welding, cutting, grinding, one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint, complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender