Tender For Providing & Installing Decorative Poles & Lights In Front Of Panvel Municipal Corporations New Head Office Road.
Tender Value
2.92 Crore
Estimated cost
Bid Submission
15 Oct 2026
8 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing & Installing Decorative Poles & Lights In Front Of Panvel Municipal Corporations New Head Office Road.
BOQ
| Sl. No. | Item Description |
| 1 | SITC of 5M Single arm Decorative single-arm lighting pole designed for streetscape and mix of heritage and modern design. Fabricated using GI tubular shaft with FRP ornamental base casting and geometry symbolic elements in bracket. Overall, Pole Height: 5 m (above foundation level), Base Casting Material: FRP Base Size: 550 mm height × 355 mm width at base, Materials & Construction Galvanized Steel tubular construction of 89mm dia pipe section. The base plate shall be of 200 x 200 x12mm thickness. The Bracket shall be made of Decorative Laser cut single arm with Geometrical design. The base shall be made of FRP material. The Fibre Reinforced Polymer Made of marine quality Composite. It is Reinforced with glass fibre Chopped Strand Mat EMC450, with Area Weight of =/-7.5% as per IS03374, Moisture Content of <20% as per IS03344, Size Content of 3. 7(1 +31 %) as per ISO 1887and Breakage Strength of > 140N as per ISO 3342. isophthalic Unsaturated Polyester laminating resin having medium viscosity and Low reactivity based on isophthalic acid and standard glycols, dissolved in styrene monomer is used in making the product. The resin has Viscosity at 25°C (P): 400 to 500, Acid Value (mg KOH/gm): 15-20, Specific Gravity at25°C: :1.11 +0.02, Volatile content (%): 38 +/-3, Gel time at 30°C (minutes), (with Resin =100 grams; Accelerator 3% Cobalt Octoate = 1.0 and Catalyst MEKP M-50= 1.5 ml): 8 to 12.Cured clear Cast Resins comes with following properties: Barcol hardness: 42, : 42 Heat deflection temperature (°C): 94, Tensile strength (kg/cm2): 600, Tensile modulus Map of3100; Elongation at break: 2.5%; Flexural strength (kg/cm2): 1050, Flexural modulus (Mpa)of 3200, Water absorption @25°C (mg) (after 24hours) of 20. The method-of-testing and the tolerances are as prescribed in IS-67 46-1994. The product is an all-Weather proof &Maintenance free with long design life. Pre-paint treatments It is self-coloured textured surface finish with scratch resistant, aliphatic grade U.V stabilized PU paint with UV stable Polyurethane with viscosity of 80(+/-3 Sec), Gravity 97(+/-3) Grams, Fineness of Grind 3 Micron with long standing life. The FRP is of minimum 2.5 mm Thickness with 10% tolerance. This FRP cladding is fitted with SS screws of 40mm length on RCC column as per the enclosed drawing. The FRP cladding sheets will come in multiples & shall be assembled at site. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3: 1987.Pole section shall be welded using high end MIG welding processes. Service door 320mm height x 153mm bottom x 120mm top width shall be provided with the company logo on the bottom of the door and safety rope with IP protection rating. The internal junction section will be suitable for 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Mild steel mounting plate 300mm x 16mm thick dia Steel of grade E250 to IS 2062 : 2011 with 4 holes 34 to suit M20 x with 4 Nos 750mm foundation bolts. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. The GI pipes shall be of make TATA / JSW conforming to IS 1161 / 1239 standard. All dimension and weight are within +/- 10% tolerance. The pole shall be coated with Etch primer, Epoxy zinc phosphate primer, MIO and finished using environmentally stable polyurethane-based paint (coating thickness 180 microns (+/-10microns). |
| 2 | SITC of 9000mm GEONEX Double arm pole made of circular GI pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.5mm thick with 3000mm Height & Top section 114.3mm Dia x 3.5mm thick with 4500mm Height 89mm Dia x 3.5mm for bracket pipe section. Decorative base design made of FRP, starting with circular plinth of 400mm dia. for 100mm height, followed by a ring of 400 dia gradually tapering upto dia 235mm for 700mm height which is followed by decorative portion of 308mm (W) x 90mm (H) which is followed by a portion starts with 240mm (W) & gradually tapering upto 155mm dia to 190mm height, then gradually increasing upto 290mm as approved by the concerned Engineer. The total height of decorative FRP base is 1150mm and weight approx. 18kgs. The decorative ring in (ID 144mm/118mm- 7kgs) middle of the pole and second ring (ID 118mm/118mm- 8kgs.) on top made of cast Iron. Bracket stem made of GI Pipe 88.9mm Dia x 3.5mm thick with a length of 1500mm. The horizontal arm made of a FRP geometrical design placed on both side the pipe connector at the end that facilitate the fitment of street light at 1500mm both arm from the vertical axis of the bracket stem. The Fibre Reinforced Polymer Made of marine quality Composite. It is Reinforced with glass fibre Chopped Strand Mat EMC450, with Area Weight of =/-7.5% as per IS03374, Moisture Content of <20% as per IS03344, Size Content of 3. 7(1 +31 %) as per ISO 1887 and Breakage Strength of > 140N as per ISO 3342. isophthalic Unsaturated Polyester laminating resin having medium viscosity and Low reactivity based on isophthalic acid and standard glycols, dissolved in styrene monomer is used in making the product. The resin has Viscosity at 25°C (P): 400 to 500, Acid Value (mg KOH/gm): 15-20, Specific Gravity at 25°C: :1.11 +0.02, Volatile content (%): 38 +/-3, Gel time at 30°C (minutes), (with Resin = 100 grams; Accelerator 3% Cobalt Octoate = 1.0 and Catalyst MEKP M-50= 1.5 ml): 8 to 12. Cured clear Cast Resins comes with following properties: Barcol hardness: 42, : 42 Heat deflection temperature (°C): 94, Tensile strength (kg/cm2): 600, Tensile modulus Map of 3100; Elongation at break: 2.5%; Flexural strength (kg/cm2): 1050, Flexural modulus (Mpa) of 3200, Water absorption @25°C (mg) (after 24hours) of 20. The method-of-testing and the tolerances are as prescribed in IS-67 46-1994. The product is an all-Weather proof & Maintenance free with long design life. Pre-paint treatments It is self-coloured textured surface finish with scratch resistant, aliphatic grade U.V stabilized PU paint with UV stable Polyurethane with viscosity of 80(+/-3 Sec), Gravity 97(+/-3) Grams, Fineness of Grind 3 Micron with long standing life. The FRP is of minimum 2.5 mm Thickness with 10% tolerance. This FRP cladding is fitted with SS screws of 40mm length on RCC column as per the enclosed drawing. The FRP cladding sheets will come in multiples & shall be assembled at site. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3: 1987. Pole section shall be welded using high end MIG welding processes. Service door 320mm height x 153mm bottom x 120mm top width shall be provided with the company logo on the bottom of the door and safety rope with IP protection rating. The internal junction section will be suitable for 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Mild steel mounting plate 400mm SQ with 16mm thick. MS Steel of grade E250 to IS 2062 : 2011 with 4 holes 34 to suit M20 x with 4 Nos 750mm foundation bolts. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. The GI pipes shall be of make TATA / JSW conforming to IS 1161 / 1239 standard. All dimension and weight are within +/- 10% tolerance. The pole shall be coated with Etchprimer, Epoxy zinc phosphate primer, MIO and finished using environmentally stable polyurethane-based paint (coating thickness 180 microns (+/-10microns). |
| 3 | SITC of 9000mm GEONEX Single arm pole made of circular GI pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.5mm thick with 3000mm Height & Top section 114.3mm Dia x 3.5mm thick with 4500mm Height 89mm Dia x 3.5mm for bracket pipe section. Decorative base design made of FRP, starting with circular plinth of 400mm dia. for 100mm height, followed by a ring of 400 dia gradually tapering upto dia 235mm for 700mm height which is followed by decorative portion of 308mm (W) x 90mm (H) which is followed by a portion starts with 240mm (W) & gradually tapering upto 155mm dia to 190mm height, then gradually increasing upto 290mm as approved by the concerned Engineer. The total height of decorative FRP base is 1150mm and weight approx. 18kgs. The decorative ring in (ID 144mm/118mm-7kgs) middle of the pole and second ring (ID 118mm/118mm- 8kgs.) on top made of cast Iron. Bracket stem made of GI Pipe 88.9mm Dia x 3.5mm thick with a length of 1500mm. The horizontal arm made of a FRP geometrical design placed on one side the pipe connector at the end that facilitate the fitment of street light at 1500mm both arm from the vertical axis of the bracket stem. The Fibre Reinforced Polymer Made of marine quality Composite. It is Reinforced with glass fibre Chopped Strand Mat EMC450, with Area Weight of =/-7.5% as per IS03374, Moisture Content of <20% as per IS03344, Size Content of 3. 7(1 +31 %) as per ISO 1887 and Breakage Strength of > 140N as per ISO 3342. isophthalic Unsaturated Polyester laminating resin having medium viscosity and Low reactivity based on isophthalic acid and standard glycols, dissolved in styrene monomer is used in making the product. The resin has Viscosity at 25°C (P):400 to 500, Acid Value (mg KOH/gm): 15-20, Specific Gravity at 25°C: :1.11 +0.02, Volatile content (%): 38 +/-3, Gel time at 30°C (minutes), (with Resin = 100 grams; Accelerator 3%Cobalt Octoate = 1.0 and Catalyst MEKP M-50= 1.5 ml): 8 to 12. Cured clear Cast Resins comes with following properties: Barcol hardness: 42,: 42 Heat deflection temperature (°C): 94, Tensile strength (kg/cm2): 600, Tensile modulus Map of 3100; Elongation at break: 2.5%; Flexural strength (kg/cm2): 1050, Flexural modulus (Mpa) of 3200, Water absorption @25°C (mg) (after24hours) of 20. The method-of-testing and the tolerances are as prescribed in IS-67 46-1994. The product is an all-Weather proof & Maintenance free with long design life. Pre-paint treatments It is self-coloured textured surface finish with scratch resistant, aliphatic grade U.V stabilized PU paint with UV stable Polyurethane with viscosity of 80(+/-3 Sec), Gravity 97(+/-3) Grams, Fineness of Grind 3 Micron with long standing life. The FRP is of minimum 2.5 mm Thickness with 10% tolerance. This FRP cladding is fitted with SS screws of 40mm length on RCC column as per the enclosed drawing. The FRP cladding sheets will come in multiples & shall be assembled at site. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3: 1987. Pole section shall be welded using high end MIG welding processes. Service door 320mm height x 153mm bottom x 120mm top width shall be provided with the company logo on the bottom of the door and safety rope with IP protection rating. The internal junction section will be suitable for 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Mild steel mounting plate 400mm SQ with 16mm thick. MS Steel of grade E250 to IS 2062 : 2011 with 4 holes 34 to suit M20 x with 4 Nos 750mm foundation bolts. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. The GI pipes shall be of make TATA / JSW conforming to IS 1161 / 1239 standard. All dimension and weight are within +/- 10% tolerance. The pole shall be coated with Etch primer, Epoxy zinc phosphate primer, MIO and finished using environmentally stable polyurethane-based paint (coating thickness 180 microns (+/-10microns). |
| 4 | Supplying of 8000mm GEONEX Double arm pole made of circular GI pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.5mm thick with 2000mm Height & Top section 114.3mm Dia x 3.5mm thick with 4500mm Height 89mm Dia x 3.5mm for bracket pipe section. Decorative base design made of FRP, starting with circular plinth of 400mm dia. for 100mm height, followed by a ring of 400 dia gradually tapering upto dia 235mm for 700mm height which is followed by decorative portion of 308mm (W) x 90mm (H) which is followed by a portion starts with 240mm (W) & gradually tapering upto 155mm dia to 190mm height, then gradually increasing upto 290mm as approved by the concerned Engineer. The total height of decorative FRP base is 1150mm and weight approx 18kgs. The decorative ring in (ID 144mm/118mm- 7kgs) middle of the pole and second ring (ID 118mm/118mm- 8kgs.) on top made of cast Iron. Bracket stem made of GI Pipe 88.9mm Dia x3.5mm thick with a length of 1500mm. The horizontal arm made of a FRP geometrical design placed on one side the pipe connector at the end that facilitate the fitment of street light at 1500mm both arm from the vertical axis of the bracket stem. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3: 1987. Pole section shall be welded using high end MIG welding processes. Service door 320mm height x 153mm bottom x 120mm top width shall be provided with the company logo on the bottom of the door and safety rope with IP protection rating. The internal junction section will be suitable for 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Mild steel mounting plate 300mm x 16mm thick dia Steel of grade E250 to IS 2062 : 2011 with 4 holes 34 to suit M20 x with 4 Nos 750mm foundation bolts. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. The GI pipes shall be of make TATA / JSW conforming to IS 1161 / 1239 standard. All dimension and weight are within +/- 10% tolerance. The pole shall be coated with Etch primer, Epoxy zinc phosphate primer, MIO and finished using environmentally stable polyurethane-based paint (coating thickness 180 microns (+/-10microns). |
| 5 | SITC of 8000mm GEONEX Single arm pole made of circular GI pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.5mm thick with 2000mm Height & Top section 114.3mm Dia x 3.5mm thick with 4500mm Height 89mm Dia x 3.5mm for bracket pipe section. Decorative base design made of FRP, starting with circular plinth of 400mm dia. for 100mm height, followed by a ring of 400 dia gradually tapering upto dia 235mm for 700mm height which is followed by decorative portion of 308mm (W) x 90mm (H) which is followed by a portion starts with 240mm (W) & gradually tapering upto 155mm dia to 190mm height, then gradually increasing upto 290mm as approved by the concerned Engineer. The total height of decorative FRP base is 1150mm and weight approx. 18kgs. The decorative ring in (ID 144mm/118mm-7kgs) middle of the pole and second ring (ID 118mm/118mm- 8kgs.) on top made of cast Iron. Bracket stem made of GI Pipe 88.9mm Dia x 3.5mm thick with a length of 1500mm. The horizontal arm made of a FRP geometrical design placed on one side the pipe connector at the end that facilitate the fitment of street light at 1500mm both arm from the vertical axis of the bracket stem. The Fibre Reinforced Polymer Made of marine quality Composite. It is Reinforced with glass fibre Chopped Strand Mat EMC450, with Area Weight of =/-7.5% as per IS03374, Moisture Content of <20% as per IS03344, Size Content of 3. 7(1 +31 %) as per ISO 1887 and Breakage Strength of > 140N as per ISO 3342. isophthalic Unsaturated Polyester laminating resin having medium viscosity and Low reactivity based on isophthalic acid and standard glycols, dissolved in styrene monomer is used in making the product. The resin has Viscosity at 25°C (P):400 to 500, Acid Value (mg KOH/gm): 15-20, Specific Gravity at 25°C: :1.11 +0.02, Volatile content (%): 38 +/-3, Gel time at 30°C (minutes), (with Resin = 100 grams; Accelerator 3% Cobalt Octoate = 1.0 and Catalyst MEKP M-50= 1.5 ml): 8 to 12. Cured clear Cast Resins comes with following properties: Barcol hardness: 42, : 42 Heat deflection temperature (°C): 94, Tensile strength (kg/cm2): 600, Tensile modulus Map of 3100; Elongation at break: 2.5%; Flexural strength (kg/cm2): 1050, Flexural modulus (Mpa) of 3200, Water absorption @25°C (mg) (after 24hours) of 20. The method-of-testing and the tolerances are as prescribed in IS-67 46-1994. The product is an all-Weather proof & Maintenance free with long design life. Pre-paint treatments It is self-coloured textured surface finish with scratch resistant, aliphatic grade U.V stabilized PU paint with UV stable Polyurethane with viscosity of 80(+/-3 Sec), Gravity 97(+/-3) Grams, Fineness of Grind 3 Micron with long standing life. The FRP is of minimum 2.5 mm Thickness with 10% tolerance. This FRP cladding is fitted with SS screws of 40mm length on RCC column as per the enclosed drawing. The FRP cladding sheets will come in multiples & shall be assembled at site. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3: 1987. Pole section shall be welded using high end MIG welding processes. Service door 320mm height x 153mm bottom x 120mm top width shall be provided with the company logo on the bottom of the door and safety rope with IP protection rating. The internal junction section will be suitable for 6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Mild steel mounting plate 400mm SQ with 16mm thick. MS Steel of grade E250 to IS 2062: 2011 with 4 holes 34 to suit M20 x with 4 Nos 750mm foundation bolts. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. The GI pipes shall be of make TATA / JSW conforming to IS 1161 / 1239 standard. All dimension and weight are within +/- 10% tolerance. The pole shall be coated with Etch primer, Epoxy zinc phosphate primer, MIO and finished using environmentally stable polyurethane-based paint (coating thickness 180 microns (+/-10microns). |
| 6 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). |
| 7 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole). |
| 8 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). |
| 9 | Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 10 | Supplying and erecting integrated LED street light fitting 160-170W IP65 &IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 19000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG ODF/FLS2. |
| 11 | Supplying and erecting integrated LED street light fitting 130-140W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 15600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/FLS2. |
| 12 | Supplying and erecting integrated LED street light fitting 120W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 13000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 13 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 14 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 15 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 16 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 17 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 18 | Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 19 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 20 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 21 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. |
| 22 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 23 | Supplying & erecting three phase, 415V, street light control panel up to the max load of 12kW, TPN MCB 63A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 24 | Supplying and erecting triple pole mini feeder pillar with 500V, 200A FPMCCB as incomer and 2 outgoing circuits with HRC fuse base and cartridge of 100A with aluminium bus bar erected in 14 SWG CRCA sheet box with supporting angles, self locks, gasket having IP54,IK10 protection and slanting top to be erected on provided foundation complete as per specification no. SWSWR/ MFP |
| 25 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender