Tender For Certain Repairs To Rigid Pavement,Hardstanding, Painting ,Joint Filling Etc In Tech Area Under 17 Fbsu, Af
Tender Value
10 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Rigid Pavement,Hardstanding, Painting ,Joint Filling Etc In Tech Area Under 17 Fbsu, Af
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Oct-2026 | BOQ Corrigendum | BOQ | 22-Oct-2026 |
| 2 | 22-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Oct-2026 |
| 3 | 29-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Racking out of existing sealant compound and packup rod of the existing construction joints ( 10 to 12 mm )by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size ,straight and smooth edges ,joint cleaned thoroughly with application of compressed air ,joint shall be made dry ,vaccum cleaned and free of dirt,oil,vegitation and other debris .Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pouring the sealant .There after filled with closed cell medium density cross linked polyethylene foam backup rod of 12 mm dia for complete length of the joint over it to be filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212,BS-4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of +/- 30%.complete all as specified and directed. PU sealant Make: STP/ Dr. Fixit/ Sika flex/ or any CAM.Primer Make: STP/ Dr. Fixit/ Sika flex/ or any CAM. |
| 2 | Racking out of old existing sealant compound , packup rod and filler board of the existing expansion joints ( 20 to 25 mm )by special tools like cutting blades/machines, widening of joints by 2 mm by using joint cutting blades of appropriate size ,straight and smooth edges ,joint cleaned thoroughly with application of compressed air ,joint shall be made dry ,vaccum cleaned and free of dirt,oil,vegitation and other debris .Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pouring the sealant .There after filled with free moulded 25mm thick compressible polyethylene closed cell type filler board as specified ,over it filled with closed cell medium density cross linked polyethylene foam backup rod of 30 mm dia for complete length of the joint. Finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212,BS-4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of +/- 30%.complete all as specified and directed. PU sealant Make: STP/ Dr. Fixit/ Sika flex/ or any CAM.Primer Make: STP/ Dr. Fixit/ Sika flex/ or any CAM. |
| 3 | Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed |
| 4 | Material and labour for 100mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate)as in sub base and paving's etc complete all as specified and directed |
| 5 | Material and labour for 50mm thick cement concrete type B-1 1:2:4 (20mm graded stone aggregate)as in flooring and paving's etc complete all as specified and directed |
| 6 | M&L for repair of concrete slab or pavement damaged /spoiled edges/surfaces to rectangular section removing all loose and foreign material and disposing off the same to a distance exc. 200 M but n. exec 500 M and cleaning the surface and filling with epoxy resin all as per manufacturer's instruction including necessary form complete all as specified and directed.Note : - Sand for epoxy mortar shall be used \\"QUARTZ\\" sand and hardener.Epoxy Resin Make: FOSROC/NITO MORTOR/SIKA/ or any CAM |
| 7 | M&L for repair of concrete slab or pavement damaged/spoiled edges/surfaces cut to rectangular section, removing all loose and foreign material and disposing off the same to a distance exc. 200 M but n. exec 500 M and cleaning the surface and filling FLEXOPATCH-ELASTOMERIC CONCRETE all as per manufacturer's instruction including necessary form work complete all as specified and directed. Note: ELASTOMERIC CONCRETE Mortar shall be \\"QUARTZ\\" with fiber and hardener.(Combining elastic resin binder with quartz aggregate sand)Make: SikaEmseal/ D.S Brown / or any CAM |
| 8 | M & L for preparation of new or previously treated bituminous/concrete surfaces to recieve painting, painting lines, dashes, arrows, letters etc exceeding 10 cm width with two coat of approved water based road marking paint color white, Golden yellow, deep orange, PO red and black as per the requirement in the Air Field complete all as specified and directed. The line painting shall stand out boldly and solidly without showing signs of brush marks or surface underneath.If necessary the surface shall be repainted until the desired result is obtained. complete all as specified and directed. Make: Berger(Guide line RM164 Paint)/Asian Paint(Apco track)/Shalimar(RUSTEX)/or any CAM |
| 9 | M & L for preparation of bituminous/concrete surfaces and painting lines, dashes, arrows, letters etc not exc. 10 cm width with two coat of approved water based Road marking paint of color white, Golden yellow, deep orange, PO red and black as per the requirement in the Air Field If necessary the surface shall be repainted until the desired result is obtained.complete all as specified and directed.Make: Berger(Guide line RM164 Paint)/Asian Paint(Apco track)/Shalimar(RUSTEX)/or any CAM |
| 10 | Dismantling Stone slabs /cement tiles etc of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified & directed. |
| 11 | M&L 75 mm thick PCC type D-2 ,1:4:8(using 40 mm graded stone aggregate) as in sub base of hard standing, flooring and paving etc complete all as specified and directed. |
| 12 | Sand filling under floors including watering and consolidation complete all as specified & directed. |
| 13 | M & L Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade with pigments complete all specified and directed.Make: Mehtab tiles or any CAM Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 03, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
TodayNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender