Tender For Completion Of Incomplete Works For Conversion Of Oh/Ht Lines To Ug Lines At Zone-1 And Augmentation Of Electric Services At Zone-2 Under Ge Gwalior
Tender Value
95.37 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
14 days left
EMD
1.69 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Completion Of Incomplete Works For Conversion Of Oh/Ht Lines To Ug Lines At Zone-1 And Augmentation Of Electric Services At Zone-2 Under Ge Gwalior
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Oct-2026 | date | Date | 11-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fix HT overhead lines XLPE insulated 11000 volt grade AB Cable 3-Core x 95 Sqmm (Aluminium) + 70 Sq mm (steel) wire complete on existing 11 meter steel poles complete all as specified and directed. Make : Havells/Polycab/Grandlay |
| 2 | S&F HT Eye Hooks complete all as specified and directed. |
| 3 | S&F HT Suspension Clamp complete all as specified and directed. |
| 4 | S&F Dead End Clamp complete all as specified and directed. |
| 5 | Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminiium conductor, 11000 volts grade cross sectional area 95 sq. mm 3 Core complete all as specified and directed. |
| 6 | S&F Single core Joint Kit for Bunched cable of size 70 Sqmm to 120 Sqmm complete all as specified and directed. |
| 7 | M&L Steel tublar swaged poles, complete with cast iron base plate, finials taper plug , bolts, nuts & screws as specified type 410 SP-55 (11.00 mtr long) complete all as specified and directed. Note : Earth work and PCC shall be measured & paid separately under respective items. |
| 8 | M&L Cable joining kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with joining material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed. |
| 9 | M&L for cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for set of three core XLPE aluminium conductor cable of size 120 Sqmm to 185 sqmm including testing after jointing complete all as specified and directed. |
| 10 | M & L for GI Pipe light grade complete with fittings laid in floor/ trenches/ wall as cable protection of 100 mm dia all as specified and directed. |
| 11 | Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine up to 150 mm complete all as specified and directed. |
| 12 | Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with using galvanised iron 32×6mm strip as earthing lead all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion complete all as specified and directed. |
| 13 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normalground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 14 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated using 32 x 6 mm galvanized MS strip complete all as specified and directed. |
| 15 | Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in hard/dense soil complete all as specified and directed. |
| 16 | Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and directed. |
| 17 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 18 | M&L for sand cushioning in trenches for cable protection including consolidation complete all as specified and directed. |
| 19 | Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm complete all as specified and directed. |
| 20 | M & L for cross arms, bracing, supports, clamps and back plated fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross arms complete all as specified and directed. |
| 21 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed. |
| 22 | M&L for PCC 1:3:6, type C2 (using 40mm graded aggregate ) as in foundation, filling and mass cement concrete all as specified and directed. |
| 23 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded BT stone aggregate as in bed block for hold fast or coping including necessary form work complete all as specified and directed. |
| 24 | M&L for stay assembly 16/20mm dia rod complete with accessories as shown in electrical plate No 1 (Loop type insulator, stay clamps, excavation and concrete measured separately) complete all as specified and directed. |
| 25 | M&L Galvanised steel wire 3.15 or 4mm dia stranded 7/2.24mm complete all as specified and directed |
| 26 | M&L Loop type insulator, vitreous porcelain,white, brown or green Large size, with overall dimensions 90mmx140mm, clearance of hole 25.5mm complete all as specified and directed. |
| 27 | M&L for HT cable route indicator factory cast made from of size 800mm x 230mm x 100 including excavation PCC for foundation embossed writing as \\"11 kv cable\\" incl painting preparation of surfaces both sides all as specified and directed. |
| 28 | Supply & Fix HT SFU of 11 kv LBSF panel outdoor complete with, 630-A Load break switch, 200-A D.O.set,Room Space heater with thermostate,Earth switch,Pvc sleeved copper bus- bar for Incoming, Door Interlocking mechanism, Tripping mechanism, Epoxy insulator for bus supports, H. V. cable box provided, For end termination at incoming side, End plate , Provided at outgoing side for end termination with cloud base sim operated etc complete including bus coupler to T/f duct with copper bus bar all as specified and directed.Notes: Electric Control/Mechanical Switchgear/Universal Switchgear. |
| 29 | Supply,installation,testing and commissioning of Automatic micro Processor based 11 KVA Smart Transformer energy monitoring system for upto 500kva Transformer via V sat satellite Controlled transmission and non-internet & Non gsm/Non gprs/Non Rf based with following features:-(a) Automatic monitoring of electrical data parameters of 11 KVA Transformer Load of each phase.(b) Sending sms alert for high loading perimeters of transformer on pre-defined numbers(c) Satellite Vsat controlled module for transmit ion of Transformer energy data To control room (Non GSM (Non Sim Based),Non GPRS, Non RF, Non Internet, Non RTU Based Data Transition) (d) Live graphical trends for current(e) Live data monitoring at an interval of 60 sec(f) Data storage for at least one year(g) Live monitoring can also be done on android smart phone from any where(h) Energy Parameters such as frequency,3 Phase Voltage, current, Power factor, KVA,KVAH, KW and KWH can be monitored from the central control room through SCADA based software(j) With SMS alert for High Temperature and Low Transformer Oil level to 5 Mobile Nos(k) SMS Alert incase of various high/low electrical parameters for the protection of HT transformer(l) The Wireless satellite based modem shall have 4 nos digital & 4 Nos Analouge input to monitor Temperature & Oil level of HT Transformer(m) SMS Alert in case of LT Fuse blown, High load, High Temperature and low oil level of HT Transformer (n) with software for remote monitoring of transformer electrical perimeters via aneroid phone mobile with secured pass word(o) With satellite Vsat controlled data transmitter (Non GSM (Non Sim Based),Non GPRS, Non RF, Non Internet, Non RTU Based Data Transmittion)(p) Automatic monitoring of electrical data parameters for upto 500 kva Transformer(q) All the electrical and alarm data can be printed in EXCEL Format for report generation With date and time for weekly/monthly/yearly) |
| 30 | Supply, installation, testing & commissioning of Smart CT 100/5 to 700/5 (3 ct Per transformer) complete all as specified and directed. |
| 31 | Supply installation testing and commissioning of Automation software in desktop and mobile version for monitoring of Electrical perimeters for 11 kva transfomer energy monitoring system mentioned in item No. 29. Master computer and mobile |to install the sofware shal be provided by the department. A seprate LCD monitor |43 Inch & Connected device for monitoring transformer data at power house shall be provided & installed by the contractor complete all as Specified and directed. |
| 32 | Supplying & Fixing on wall / laying in ground 2 X 1.5 Sqmm PVC insulated & PVC Copper unarmored cable with heavy duty PVC Saddles 60 cm apart complete all As Specified and directed. |
| 33 | S&F Double wall corrugated HDPE pipe of size 100 mm for protection of cable complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender