Tender For Orathanadu Block - Pugf- 2026-27 - Renovation Of Anganwadi Building In Pappanadu In Avidanallavijayapuram Panchayat In Orathanadu Block.
Tender Value
3.85 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
13 days left
EMD
3900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thanjavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Orathanadu Block - Pugf- 2026-27 - Renovation Of Anganwadi Building In Pappanadu In Avidanallavijayapuram Panchayat In Orathanadu Block.
BOQ
| Sl. No. | Item Description |
| 1 | Renovation of Anganwadi Building in Pappanadu in Avidanallavijayapuram Panchayat in Orathanadu Block. |
| 2 | Dismantling and Damaged brick work clearing and removing away carfully the labour chrges including cost and conveyance and labour charges etc.complete. |
| 3 | Brick work in following Cement Mortar 1:5 using best quality Country bricks of size 8\\"3/4 x 43/8\\" X2 3/4\\" for foundation and basement including curing etc., complete complying with standard specification. Including scaffolding curing cost of reinforcement etc. all complete as per specifications and drawings as directed by the Engineer in-charge.Below basement |
| 4 | Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent and as directed. |
| 5 | Providing granolithic floor finish of 25mm thick with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm Hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 6 | Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required. |
| 7 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distember, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). For INNER WALL and Ceiling. |
| 8 | Painting two coats of newly plastered wall surface with ready mixed Plastic Emulsion Paint of First quality of approved colour over a Priming Coat including thorough scrapping, clean removal of dirt and including necessary plaster of paris putty wherever required etc, complete complying with standard specification (including primer).For OUTER WALL Surface. |
| 9 | Painting two coats of Old Iron works synthetic Enamel paint of approved colour and make over one coat of anti corrosive Zinchromite primer over New Steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filler etc. including cost of filler, primer, paint all complete as per drawings and specifications. |
| 10 | Painting two coats of New Iron works synthetic Enamel paint of approved colour and make over one coat of anti corrosive Zinchromite primer over New Steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filler etc. including cost of filler, primer, paint all complete as per drawings and specifications. |
| 11 | Supply and fixing of mild Steel Doors of 1.05x1.20m size with standard specification including cost and conveyance of all materials and all labour charges etc complete. |
| 12 | Supply and fixing of mild Steel Windows of 1.00x2.00m size with standard specification including cost and conveyance of all materials and all labour charges etc complete. |
| 13 | Supply and fixing of mild Steel Ventilator of 1.05x0.45m size with standard specification including cost and conveyance of all materials and all labour charges etc complete. |
| 14 | Electrical Arrangements |
| 15 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) SD 20 |
| 16 | Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed Plug point (SD No.12) |
| 17 | Supply and fixing of 300mm (12\\") sweep (light duty) AC exhaust fan complete with necessary wall opening andmaking good of the wall Exhaust Fan (SD 114) |
| 18 | Supply and fixing of 4'-18W LED tube with fitting inclusive of all charges SD 88 |
| 19 | Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.44) |
| 20 | Kitchen Stage Arrangements |
| 21 | Brikc work in CM 1:5 mix usihg country bricks of size 8¾x4¼x2¼ including cost and conveyance and all other labour charges etc., completed |
| 22 | Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent and as directed |
| 23 | Painting the walls with two coats Exterior Emulsion Paint over one coat of primer as instructed including cost of materils and all labour charges etc., completed |
| 24 | Cost, supply and fixing of Cuddappah slab 20/30mm thick for Shelf, Cupboard and Kitchen top including cost and conveyance of all materials and labour charges etc., complete |
| 25 | Cubboard Shelf Arrangements |
| 26 | Brikc work in CM 1:5 mix usihg country bricks of size 8¾x4¼x2¼ including cost and conveyance and all other labour charges etc., completed |
| 27 | Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent and as directed |
| 28 | Painting the walls with two coats Exterior Emulsion Paint over one coat of primer as instructed including cost of materils and all labour charges etc., completed |
| 29 | Cost, supply and fixing of Cuddappah slab 20/30mm thick for Shelf, Cupboard and Kitchen top including cost and conveyance of all materials and labour charges etc., complete |
| 30 | Provision for Name board Lettering arrangements |
| 31 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender