Tender For Installation Of A High Mast At Babu Parasnath Maurya Government Polytechnic, Aurai, Bhadohi
Tender Value
4.13 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
4 days left
EMD
41300
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadohi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Installation Of A High Mast At Babu Parasnath Maurya Government Polytechnic, Aurai, Bhadohi
BOQ
| Sl. No. | Item Description |
| 1 | Electrical Work |
| 2 | Supply and fixing of 12.5 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3mm. Top dia minimum 150 mm, bottom dia minimum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6mum dia, double drum winch. including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect. |
| 3 | Supplying and laying of 10 sqmm 4Core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade etc as required and directed by Engineer In charge. 10 sq. mm 4 core |
| 4 | Supply and Fixing steel Tubular Pole 7.5 mtr long designated 410SP-5 in 1:3:6 cement concrete foundation including excavation back filling etc complete in all respect |
| 5 | Earthing With GI earth plate 600mm x 600mm x 6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2,7 meter long etc, with charcoal/coke and salt as required. |
| 6 | Supplying and laying 6SWG GI wire at 0.50 meter below ground level for conductor earth electrode, including connection/termination with GI thimble etc as required. |
| 7 | Supplying and laying 25x5 mm GI strip at 0.50 meter below ground as strip earth electrode, including connection/termination with GI nut bolt, spring washer etc, as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50cm) |
| 8 | Supply and Wiring of LED fittings with 4 core 4.0 sqmm FRLS copper xlpe insulated pvc shethed multistrand 1.1 kv grade copper cable complete in all respect. |
| 9 | Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc complete in all respect.. |
| 10 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors/ automatic on off switch, HRC fuses/MCB, isolating/isolater switch metering instrument & instrument box with CTs etc, in case of TPN, complete in all respect. 15A SPN |
| 11 | Miscellaneous work as per site as directed by Engineers incharge |
| 12 | LED Flood Light, powder coated pressure die cast aluminum (System lumen efficacy ≥120 and <135 lm/Watt)Supplying, installation, Testing & Commissioning of Flood Light- 250 Watt, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg 120deg as per the application and the project requirement deg, suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching)Operating temp range -15 deg |
| 13 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender