Tender For Special Repairs To Irrigation Section Office, Wrd C Us At Sendurai In Sendurai Taluk Of Ariyalur District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ariyalur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Irrigation Section Office, Wrd C Us At Sendurai In Sendurai Taluk Of Ariyalur District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavating and depositing on bank with initial lead of 10 m and initial lift of 2m hard stiff clay, stiff black cotton soil, hard red earth, shales, murranms, gravel stoney earth and earth mixed with small sized boulders etc. complete complying with standard specifications and as directed by the departmental officers |
| 2 | Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 3 | Providing Cemet Concrete 1:4:8 using 40mm gauge HBG stone jelly for foundation and flooring including laying, ramming centering and dewatering wherever necessary etc., Complete with standard specification. |
| 4 | Plain Cement Concrete 1:2:4 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 5 | Reinforced Cement concrete 1:11/2 :3 ( one cement, one point five zero sand and three aggregates)using 20mm HBGS Jelly including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 6 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire |
| 7 | Supplying erecting and Centering for sides and soffits of plain surfaces such as slab etc., including strutting using MS sheets of size 90Cm x 60CM B.G. 10 gauge stiffened with welded MS angles of size 25MM x 25MM x 3MM for boarding laid over silver oaks (Country wood) joists of size 10CM x 6.50CM ( spaced at 90 CM centre to centre) and supported by casurina props of 10Cm to 13 Cm dia. (spaced at 75 Cm centre to centre) etc., complete complying with standard specifications and as directed by the Departmental Engineers. |
| 8 | Without strutting |
| 9 | Centring with strutting upto 3m |
| 10 | Brick work in following Cement Mortar using best quality of country bricks of size 8-3/4\\" x 4-1/4\\" x 2-3/4\\" for foundation and basement including curing, etc., complete complying with standard specifiction. |
| 11 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 12 | Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work). |
| 13 | Casting and fixing of R C C Post for fencing of size 0.15 x 0.15 x 2.10 in RCC 1:2:4 with minimum reinforcement (Main rod 4 nos, 10mm dia and stirrups, 6mm dia @ 15 cm c/c) including conveyance to work site and fixing by the earth work excavation for 60 X 60 X 60 cm depth and laying plain cement concrete 1:4:8 for 15 cm depth over which 60 X 60 X 45 cm PCC 1:3:6 concrete base alround the stone as per the standard specification as directed by the Engineer incharge of the work. |
| 14 | Supply and fixing of two ply Barbed wire fencing (3 rows) at site of work including fixing at regular intervals of height binding to the existing steel angle post with binding wires etc., complete. |
| 15 | Supplying and fixing of chain link fixing 5cm x 5cm 10 Gauge including cost and conveyance by work site labour existing concrete or G.I.pole with galvanised wire as per complying depart mental officer. |
| 16 | Supplying and fixing in position Mild steel grills for windows, ventilators etc. including priming coat complete complying with standard specification. ) |
| 17 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 18 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) overed with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work . (M 0674) |
| 19 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 20 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) |
| 21 | Dismantling, Clearing away and carefully Stacking materialsfor re-use (or) Floor finish & dadooing walls in cement mortar with Mosaic tiles / Glazed tiles / Clay tiles / Cuddapah Slabs |
| 22 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 23 | Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. - Above ground level For Externall water supply |
| 24 | External water supply arrangementsSupplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. -Below ground level For Externall water supply |
| 25 | Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 26 | IV Bend (d) 25 mm dia |
| 27 | V Coupler ( d) 25 mm dia |
| 28 | Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete. |
| 29 | GST 18% in Figures Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender