Tender For Special Repairs To The Ponnar Branch Channel D/S Of No. 2 Head Sluice In T.Palur Village Of Udayarpalayam Taluk In Ariyalur District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Oct 2026
12 days left
EMD
8900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ariyalur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To The Ponnar Branch Channel D/S Of No. 2 Head Sluice In T.Palur Village Of Udayarpalayam Taluk In Ariyalur District.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of stone/brick masonry in cement mortar walls under 3m high add for every additional 3m or part there of over the initial height of 3m under 3m heigh etc. complete complying with standard specifications and as directed by the Departmental Engineers. |
| 2 | Earth work excavation for foundation in all kinds of soils and sub soils met with except hard rock requiring blasting but including all incidental charges such as shoring, strutting, baling of water if found necessary during execavation refilling the side etc. complete complying with standard specifications and as directed by the Departmental Engineers. |
| 3 | Suppliying and filling with M-sand in layers of not more than 15cm thickness well rammed including watering and consolidating etc.,complete as directed by the engineer in charge of work and complying with standard specification. |
| 4 | Plain Cement Concrete of grade M10 with well graded aggregates and the nominal maximum size of coarse aggregate of 40 mm gauge weigh batching the ingredients and mixing in approved mixers/batching plant (to produce concrete of the specified characteristic strength of 10Nmm2 at 28 days) incluiding laying the concrete in layers and in bays with all lead and lifts with compacting and finishing the surface water curing so as to attain the profile and strength specified in the approved drawing and specification and as per the direction of the Engineers complying with standard specification. |
| 5 | Plain Cement Concrete of grade M15 grade using crusher broken hard granite course aggregate of nominal maximum size of cof 20 mm to IS specified grading (to achive the specified characteristic strength of 15 N/mm2 in 28 days) and mixing the ingredients in approved mixer placing in layers and vibrating, water curing, finshing the surafce ith all leads and lifts etc., complete in all respects so as to attain the profile and strength specified in the approved drawing and specification and as per the direction of the Engineers complying with standard specification. |
| 6 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials) |
| 7 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 8 | Supplying and erecting steel centering for sides and soffits including supports and With strutting upto 3 m height for plain surfaces with all cross bracings using mild steel sheets of size 90 cm X 60 cm and BG 10 stiffened with welded mild steel angles of size 25 X 25 X 3 mm for boarding laid over country wood joists of size 10 X 6.5 cm spaced at about 90 cm c/c and suppoted by casurina props of 10 cm to 13 cm dia spaced at 75 cm c/c etc. complete as per technical specification and as directed by the Engineer in charge of the work. |
| 9 | Without Strutting |
| 10 | With Strutting (Upto 3m) |
| 11 | GST 18% in Figures Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender