Tender For Reconstruction Of Sluice No.2 In Salaigramam Tank Of Salaigramam Village In Ilayankudi Taluk Of Sivagangai District
Tender Value
7.91 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
13 days left
EMD
8000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sivaganga → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Reconstruction Of Sluice No.2 In Salaigramam Tank Of Salaigramam Village In Ilayankudi Taluk Of Sivagangai District
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Oct-2026 | Amendment to Tender Notice | Other | 14-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavating and depositing on bank with in initial lead of 10m and initial lift of 2m in hard stiffy clay, stiff black cotton, hard red earth shales murrams, gravel, stoney earth and earth mixed with small size boulders etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | Dismantling clearing away and carefully stacking materials useful for reuse for any thickness of Plain cement Concrete compete complying with standard specification and as directed by the Eingeer in charge of work. |
| 3 | Earthwork excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size of boulders hard gravelly soil inclusive of shoring to full depth strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated soil other than sand in layers of not more than 15 cm thick, well rammed, consolidated and depositing the surplus earth in places as shown by the departmental officers with an initial lead of 10 (Ten) metres and initial lift of 2 (Two) metres and clearing, levelling the site etc., complete complying with standard specification and as directed by the departmental officers. |
| 4 | Collection and Supply of Sand gravel mix 1:1 (one sand and one gravel) ratio for basement / filter zone including stacking, mixing and spreading the sand gravel mix in layers of not exceeding in 150 mm thickness over properly prepared surface, watering and consolidating the same with approved type of compaction equipment including stacking for pre-measurement etc complete complying with the standard specification and as directed by the Engineer in charge of the work. |
| 5 | Cement concrete of grade M15 for plain cement concrete useing hard broken stone aggregates with maximum nominal size of 40 mm to IS specified grading mixing by mixer machine including dewatering the placement site, laying the concrete in layers and bays vibrating compacting and finishing the surface with all leads and lifts watering, curing to attain the profile and strength specified in the drawings for various depth and height below and above ground level etc., complete as directed by the Engineer in charge of work complying with the standard specification (By using mixer machine) |
| 6 | Supplying, Laying, Jointing and Fixing in position of R.C.C Hume pipe of NP3 class of 900mm dia including labour charges and jointing materials etc. complete complying with standard specification and as directed by the Engineer in charge of the Work. |
| 7 | Providing Cut stone roughly dressed and set in cement mortar 1:3 (One Cement and Three Sand) including fixing in position etc complete as directed by the engineer in charge of work complying with standard specification |
| 8 | Providing Steel Centering for RCC Slabs, beams or plain surfaces including strutting upto 3.00 m high using MS sheets, BG10 guage thick of size 90cm x 60cm, Stiffened with Ms angles of size 25mm x 25mm x 3mm laid over silver oak joists of size 10 cm x 6.5 cm spaced at 90 cm c/c and supported by casurina props of 10 cm to 13cm dia spaced at 75 cm c/c and removing the centering and shuttering after specified period without damaging the concrete laid, complying with standard specification and as directed by the Engineer. (With Strutting) |
| 9 | Cement concrete of grade M15 (1:2) design Mix with well graded aggregates and the nominal maximum size of coarse aggregate of graded mix using 40% quantity of 20mm size hard broken granite stone jelly and 60% quantity of 40mm and downgrade to I.S. specified grading mixing in mixer machine (to produce concrete of the specified characteristic strength of 15N/mm2 at 28 days) including dewatering the placement site laying vibrating, compacting and finishing the surface with all leads and lifts watering, curing ,etc, complete so as to attain the profile and strength specified in drawings and specifications for various height above ground level complete and as directed by the Engineer complying with standard specification (With Vibration) |
| 10 | Cement concrete M15 grade design Mix with well graded aggregates and the nominal maximum size of coarse aggregate of size 20 mm weigh batching the ingredients and mixing in approved mixers/batching plant (to produce concrete of the specified characteristic strength of 15N/mm2 at 28days) including dewatering the placement site by bailing/pumping and by diverting wherever necessary laying the concrete in layers and in bays with all leads and lifts compacting and finishing the surface water curing so as to attain the profile and strength specified in the approved drawing and specification for various height above ground level complete and as directed by the Engineer complying with standard specification (With Vibration for cut of wall ) |
| 11 | Providing and placing in position of plain Cement concrete of grade M20 using hard well graded aggregates with the nominal maximum size of coarse aggregate of 20mm; weigh batching the ingredients and mixing in approved mixers/batching plant (to produce concrete of the specified characteristic strength of 20 N/mm2 at 28days) including dewatering the placement site by bailing/pumping and by diverting wherever necessary; laying the concrete in layers of not exceeding 15 cm thick and in bays; compacting and finishing the surface with all leads and lifts; watering curing complete so as to attain the profile and strength specified in the approved drawing & specifications etc., complete complying with standard specification and as directed by the Departmental Officers. without vibration Wearing coat Sluice & Weir) (with out vibration) |
| 12 | Fabricating, Supplying of country wood plug size of 40 x40 cm and 45cm to 60 cm height, THe plug rod with 20mm dia mild middle centre and bottom side convered iron strap -3 nos. Plate thickness size 3mm steel plate. The plug hole size 10 cm to 25 cm dia. etc. Including cost of rod wrought and put up and fixing in correct alignment in position. The plug painted with two coats of varnish the rod painted with two coats of best anticorrosive paint and conveyance to the work site including loading unloading fixing charges etc. complete complying specification and as Directed by the Engineer |
| 13 | Refilling with excavated earth (other than M.Sand) with all leads and lifts for filling the open cut whereever necessary in power roller to atleast 95% of proctor density at OMC in earth layer and sectioning etc directed by the engineer in charge of work. Watering and consolidation with power roller |
| 14 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Oct 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender