Tender For Providing Borewell Arrangements For Additional 10 Class Rooms Building And 2 Toilet Blocks In Government Arts And Science College At Harur In Dharmapuri District.
Tender Value
7 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
12 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dharmapuri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Borewell Arrangements For Additional 10 Class Rooms Building And 2 Toilet Blocks In Government Arts And Science College At Harur In Dharmapuri District.
BOQ
| Sl. No. | Item Description |
| 1 | Drilling 150/180mm dia Vertical Borewell in hard rock formation below ground level to the required depth as directed by the departmental officers including labour charges inserting pipes assembly in the drilled pit including welding the joints wherever necessary and grouting the casing pipe etc., complete and including transportation charges for the rigs and supporting vehicles from one place to another etc., complete as directed by the Executive Engineer. |
| 2 | Upto 150m below ground level. |
| 3 | Upto 151m to 180m below ground level. |
| 4 | Upto 181m to 210m below ground level. |
| 5 | Upto 211m to 240m below ground level. |
| 6 | Upto 241m to 270m below ground level. |
| 7 | Upto 271m to 300m below ground level. |
| 8 | Supplying and delivery of PVC casing pipe as per IS 12818/1992 with ISI marking of 200mm CS (Casing Shallow depth upto 80m) in 3m length and screwed and socket end centering guides for every 15m length of pipe to suit deep borewells for delivery including loading, unloading, freight, insurence etc complete complying with standard specifications. The pipe should got approved by the Executive Engineer before use on works. |
| 9 | Supplying and fixing of 200mm dia PVC end cap for borewell as per IS 10124/1982 Part-II with ISI marking of best approved quality etc., complete complying with standard specifications. (The PVC end cap should got approved by the Executive Engineer before use on works). |
| 10 | Supplying and erecting in position of 50 litres capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents/Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No.Low Pressure Switch - 1 No.,Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. |
| 11 | Supplying and fixing of 3x4 sq.mm PVC insulated and sheated 3 core flat type copper cable confirming to IS 694/1990 etc., complete complying with standard specifications. |
| 12 | Supplying and fixingof CPVC pipe (Chlorinated Poly Vinyl Chloride) CPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance. (Schedule-40)40mm dia UPVC pipe. |
| 13 | Supplying and delivery of Nylon rope for holding the submersible pumpset and HDPE pipe etc., complete complying with standard specifications. |
| 14 | Supplying and fixing and erecting of 7.5 HP submersible pump (Three Phase) of best approved quality and make with ISI mark etc., complete complying with standard specification & as directed by the departmental officers. |
| 15 | Supplying and fixing and erecting of 5.0 HP submersible pump (Three Phase) of best approved quality and make with ISI mark etc., complete complying with standard specification & as directed by the departmental officers. |
| 16 | Supplying and fixing in position 3 Phase Panel Board including labour charges etc., complete complying with standard specifications and as directed by the departmental officers. |
| 17 | Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply Below ground level. |
| 18 | 32mm dia UPVC pipe |
| 19 | 25mm dia UPVC pipe |
| 20 | Supplying and fixing in position the following UPVC Specials best approved quality conforming to BIS and providing leak proof joints with PVC adhesive etc., including fixing to walls with necessary leak wood plugs screws etc., and fiving connections to the UPVC pipe dismanting the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc., complete complying with standard specification. (The UPVC specials should be got approved from the Executive Engineer before use on works) |
| 21 | 32mm dia UPVC Elbow |
| 22 | 25mm dia UPVC Elbow |
| 23 | 32mm dia UPVC Tee |
| 24 | 25mm dia UPVC Tee |
| 25 | 32mm dia UPVC Coupling |
| 26 | 25mm dia UPVC Coupling |
| 27 | 32mm x 25mm dia UPVC Reducer |
| 28 | Supplying and fixing and erecting of 3.0 HP submersible pump of best approved quality and make with ISI mark etc., complete complying with standard specification & as directed by the departmental officers. |
| 29 | SUB TOTAL |
| 30 | GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender