Tender For Repair, Renovation And Furnishing Of Suite 1, 2 & 3 And Office Room Including Furniture Installation Along With Connected Sewerage System At Erectors Hostel Of Uihep, Mukhiguda.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Oct 2026
5 days left
EMD
17352
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalahandi → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Renovation And Furnishing Of Suite 1, 2 & 3 And Office Room Including Furniture Installation Along With Connected Sewerage System At Erectors Hostel Of Uihep, Mukhiguda.
BOQ
| Sl. No. | Item Description |
| 1 | Removing old lime or cement plaster from walls/cealing including raking out joints 12mm deep and removing the debris within 50 m lead. Complete as per direction of EIC. |
| 2 | 12mm thick cement plaster (1:4) over brick work including all cost of materials Dr. Fixit 301 pidicrete URP (SBR latex based) liquid @ 200 Ml /50Kg of cement etc. complete. As per direction of EIC. |
| 3 | 12mm thick CP (1:3) for ceiling per Sqm including all cost of materials etc. complete. As per direction of EIC. |
| 4 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets galvanized with zinc coated of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre , one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts& bolts of rqured size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the spacing of 1200 c/c to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapped flanges of 26mm each having lips of 10.5mm, at 450mm C/C shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64 mm dia x230mm long GI wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall screws @230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm C/C including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per specifications, drawing and as per directions of the Engineer-in-Charge. but excluding the cost of painting with 12.5mm thick tapered edge gypsum plain board conforming to IS:2095-(Part-I) :2011 (Board with BIS certification marks) |
| 5 | Painting one coat with approved paint on old iron work including all cost of materials etc. complete. As per direction of EIC. |
| 6 | Supplying, fitting and fixing vitrified tile (make Kajaria / Somany / Johnson) in floors and dado skirting of size 600mm x 600mm approved make conferming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-charge (for new work only). |
| 7 | Scraping old painting from wall / ceiling with scrapers, sand papering and washing with soap water or soda upto 5M height Complete as per direction of EIC.. |
| 8 | Finishing wall surface to walls and ceiling with Acrylic wall putty (water based) making smooth to receive the painting including cost of scaffolding staging charges with cost of all materials,Labour charges,T&P etc,complete as per direction of EIC. |
| 9 | Priming one coat with any approved primer on plastered surface etc. complete. As per direction of EIC. |
| 10 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including all cost of materials etc. complete. As per direction of EIC. |
| 11 | Providing and fixing 19mm thick pre laminated medium density BWR ply wood IS:14587:1998 mark, (GREEN PLY/ CENTURIAN/ ALISHAN/ Equivalent) with one side decorative lamination other side balancing lamination grade-I in shelves with screw and fittings where ever required, edges to be sealed with PVC edge bending Tape 2.00mm thick etc. complete as per direction of EIC. |
| 12 | Providing and fixing decorative high pressure laminated sheet / wood grain in gloss/matt/Suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 type S, including all cost of handle, lock , auto hinges and adhesive of approved quality etc. complete as per direction of EIC. |
| 13 | Supply and fixing of Swing wooden laminated (WPC) Doors / Flush Door of size (2x1.05 mtr.) thickness 28mm including chowkath complete with all fittings hold fast, iron fitting and wooden hinged cleats etc. fitted and fixed in position for doors including all labour charges & transpotation & complete as per direction of EIC. |
| 14 | Dismantling and removing doors, Windows and ventilators including removal of frame,hinges festening and stacking the same for reuse and removing the debris with in 50m lead complete as per direction of EIC. |
| 15 | Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member,9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete including cost of ACP panel complete as per direction of EIC. |
| 16 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 17 | Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof. |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) (make Supreme / Finolex / Ashirvad or equivelent ) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing and including removal old and damaged existing GI / PVC pipes. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 20 mm nominal outer dia pipes |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) (make Supreme / Finolex / Ashirvad or equivelent ) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing and including removal old and damaged existing GI / PVC pipes. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 32 mm nominal outer dia pipes |
| 20 | Supply, fitting, Fixing of 32mm dia nominal bore UPVC ball valve Sch-80 (Plastic ball) PVC Ball Valve (Horizontal plunger type) conforming to IS 1703-1977 as per specification complete as per direction of Engineer-in-Charge. |
| 21 | Fixing ceramic tiles ( 45x30cm or 60x30cm) (make Kajaria / Somany / Johnson or equivalent) in dados / wall in bath room/toilet of 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed to pigments to match the said of the tiles including rubbing and polishing complete excluding cost of pre cast tiles. |
| 22 | Supplying, fitting and fixing of vitrified Anti-skid tile of premium printed series / Homogeneous having thickness 8 to 10mm (make Kajaria / Somany / Johnson or equivalent ) in floors of size 600x600cm / 40x40 cm of approved make conferming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials labours, T&P etc. required for the work all complete as per the direction of Engineer-in-charge. |
| 23 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of (make Parryware / Jaquar / Hindware or equivalent) shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 24 | Supplying, Fixing and fittings and fixing standard size 20mm dia angular stop cock (make Parryware / Jaquar / Hindware or equivalent ) including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of EIC. |
| 25 | Supplying all materials, labour, T&P and fittings and fixing standard size 15mm dia CP brass concealed stop cock (Make hindware/Jaquar/parryware or equivalent) to be approved by the EIC including supply of all necessary jointing materials including cost, conveyance of all materials to work site, payment of royalty and taxes etc. all complete. |
| 26 | Supply, fittings and fixing standard size 15mm dia long body CP Bib cock (make Hindware cat. No.F 450003 / equivalent) with wall flange and aerator with slimline health faucet with hose & hook to be approved by the EIC including supply of all necessary jointing materials including cost, conveyance of all materials to work site, payment of royalty and taxes etc. all complete. |
| 27 | Supply, fittings and fixing standard size 15mm dia tall CP pillar cock (make Hindware cat. No.F 440002 or equivalent) including supply of all necessary jointing materials including cost, conveyance of all materials to work site, payment of royalty and taxes etc. all complete as per directions of Engineer-in-Charge. |
| 28 | Supply, Fittings and fixing of CP Health faucet (Hindware F160001 or equivalent make) including supply of all necessary jointing materials including cost, conveyance of all materials to work site, payment of royalty and taxes etc. all complete as per direction of E.I.C. |
| 29 | Supply, fitting & fixing of liquid soap dispenser (JAQUAR cat. ACN - 1135N / or equivalent make) of following nominal sizes as per specification complete etc. Complete as per direction of E.I.C. |
| 30 | Supply, fitting & fixing 110mm dia PVC Nahani Trap with steel Jali of self cleaning design including cost of cutting and making good the walls and floors all complete as per specification as per directions of Engineer-in-Charge. |
| 31 | Supply, fitting & fixing of 110mm SWR unplasticised Rigid PVC soil, waste and rain water pipes (make Supreme / Finolex / Ashirvad / Astral or equivelent make) on wall / floor etc. conforming to IS : 13592 Type A, including necessary excavation and sand filling to maintain proper gradient and jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, cowl and door bend (i) Single socketed pipes, 'L' bend etc. including clamping with all and scaffolding etc. complete as per directions of Engineer-in-Charge. |
| 32 | Supply, fitting & fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails (Hindware code No.F890009 / equivalent make) complete, fixed to woden plugs with Chromium Plated brass screws as per specification etc. Complete as per direction of E.I.C. |
| 33 | Supply, fitting & fixing of Single CP towel rail of 600x25 mm long (make Hindware F450024 or equivalent) 450mm long with CP brackets to be approved by EIC with supply of wooden plugs, CP screwes etc. all complete including polishing as per PH specification etc. Complete as per direction of E.I.C. |
| 34 | Supply, fitting & fixing of standard sized Chromium Plated brass towel ring (make Hindware F450027 or equivalent) fixed to wooden plugs with Chromium Plated brass screws, complete as per specification etc. Complete as per direction of E.I.C. |
| 35 | Supplying all materials, labour, T&P and fitting and fixing CP Soap dish holder (make Hindware cat. No.F450022 or equivalent) with supply of wooden plugs, CP screws and cement etc all complete as per PH specification as per direction of E.I.C. |
| 36 | Supply fitting, fixing of Porcelain 500x400mm W.H.B wash basins (make Parryware / Jaquar / Hindware or any approved make)with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 37 | Supply, fitting & fixing of standard size 15mm dia 2 in 1 long body CP Bib cock (make Hindware F450004 or equivalent) with wall flange and aerator with slimline health faucet with hose & hook to be approved by the EIC including supply of all necessary jointing materials including cost, conveyance of all materials to work site, payment of royalty and taxes etc. all complete etc. Complete as per direction of E.I.C. |
| 38 | Supply, fitting & fixing of 600mm x 600mm or 800x600mm bevelled edge mirror (make Jaquar /Hindware /Parryware or equivalent) of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification etc. Complete as per direction of E.I.C. |
| 39 | Supply, fitting & fixing of overhead shower rose (make Hindware cat.No.F16007 and shower arm cat. No.F160099 or equivalent make) with long shower arm 24\\" to be approved by the EIC including polishing all complete as per specification as per direction of E.I.C. |
| 40 | Excavation of foundation in hard soil/gravely soil including dressing and levelling the bed and depositing the soil within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods to maximum 5cm. and layig in layer as per directions of Engineer-in-Charge. |
| 41 | Filling in foundation with excavated materials including watering and ramming as directed by the EIC. |
| 42 | Extra lift for 1.5 or part there of cover the initial lift of 1.5mtr. in all kinds of embackment and roads works and ordinary earth work in general. First extra lift of 1.5 mtr. (up to 7.5mtr.) etc. complete as per directions of Engineer-in-Charge. |
| 43 | Sand filling in foundation and plinth well watered and rammed including cost of all materials, Labour charges, conveyance, royalty etc. Complete as per direction of E.I.C. |
| 44 | Cement concrete (1:4:8)with 4cm size hard granite metal per 1cum etc. Complete as per direction of E.I.C. |
| 45 | RCC work of M-25 grade with 20mm and down grade black hard granite (cursherbroken) stone chips including hoisting and laying etc. Complete as per direction of E.I.C. |
| 46 | Rigid and smooth centering and shuttering for RCC work including flase work including supply of supports, etc with all cost, all materials etc. complete and dismantling after casting as directed by Engineer-in Charge. AR-2006. P-54 item no.10 (IV). (RCC foundation, PB and footing bases of column mass concrete pre cast slab etc.) |
| 47 | Rigid and smooth centering and shuttering for RCC work including flase work including supply of supports, etc with all cost, all materials etc. complete and dismantling after casting as directed by Engineer-in Charge. (for RCC floor and roof slab, landing balconies, projecting sun shades and chajjas upto 4.3m height. |
| 48 | Supplying HYSD Reinforcement for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc. Complete as per direction of E.I.C. |
| 49 | 12mm thick cement plaster (1:4) over brick work including all cost of materials etc. complete. As per direction of EIC. |
| 50 | Cement punning including all cost of materials etc. complete. As per direction of EIC. per Sqm. |
| 51 | 2.5 cm AS Flooring with cement concrete(1:2:4) including punning using 12mm size hand broken granite chips. Per Sqm including cost of all materials etc. complete as per direction of E.I.C. |
| 52 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling of 250mm thicknees from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 1.40m dia x 2.00 m deep Soakway pit |
| 53 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved P.H. specification and direction of E.I.C. 760mm x 760mm x 460mmm inspection chamber |
| 54 | Recessed wiring to submain in 2 X 2.5 sq.mm FR PVC insualted sinlg core multi strand copper conductor of ISI mark conforming to IS>694/1990 in 20mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1X1.5 sq.mm FR PVC insulated single core multi strand copper conductor as earth wire as required. Make - L&T or equivalent 2.5 sq.mm single core PVC multistrand copper conductor cable |
| 55 | Recessed wiring to submain in 2 X 2.5 sq.mm FR PVC insualted sinlg core multi strand copper conductor of ISI mark conforming to IS>694/1990 in 20mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1X1.5 sq.mm FR PVC insulated single core multi strand copper conductor as earth wire as required. Make - L&T or equivalent 1.5 sq.mm. single core PVC insulated multistrand copper conductor cable as earth wire |
| 56 | Recessed wiring to submain in 2 X 2.5 sq.mm FR PVC insualted sinlg core multi strand copper conductor of ISI mark conforming to IS>694/1990 in 20mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1X1.5 sq.mm FR PVC insulated single core multi strand copper conductor as earth wire as required. Make - L&T or equivalent 4 sq.mm single core PVC multistrand copper conductor cable |
| 57 | Recessed wiring to submain in 2 X 2.5 sq.mm FR PVC insualted sinlg core multi strand copper conductor of ISI mark conforming to IS>694/1990 in 20mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with 1X1.5 sq.mm FR PVC insulated single core multi strand copper conductor as earth wire as required. Make - L&T or equivalent 1.5 sq.mm. single core PVC insulated multistrand copper conductor cable as earth wire |
| 58 | Supply and fixing Of 8 way MCB DB with sheet steel enclosure,distribution board on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar,din bar,detached gland plate inter connection, phosphate and powedered painted includingearthing as requied. Make - L&T or equivalent |
| 59 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. Make - L&T or equivalent 1 or 2 module (75mm x 75mm) Make-L&T or equivalent make |
| 60 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. Make - L&T or equivalent 6 module (200mm x 75mm) |
| 61 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. Make - L&T or equivalent 12 module |
| 62 | Supply and fixing of 5 Amp to 32 Amp DP rating 240 V series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB ISI Marked complete with connection and comissioning etc as required Make - L&T or equivalent |
| 63 | Supplying and fixing of following types Modular Switch/Socket on the existing modular plate switch box including connections but excluding modular plate etc. as required Make-L&T or equivalent make. 15/16/20/32 amps switch (with indicator) |
| 64 | Supplying and fixing of following types Modular Switch/Socket on the existing modular plate switch box including connections but excluding modular plate etc. as required Make-L&T or equivalent make. 15/16/20/32 amps socket outlet |
| 65 | Supplying and fixing of following types Modular Switch/Socket on the existing modular plate switch box including connections but excluding modular plate etc. as required Make-L&T or equivalent make. S.P 5/6/10 amps, one way modular switch |
| 66 | Supplying and fixing of following types Modular Switch/Socket on the existing modular plate switch box including connections but excluding modular plate etc. as required Make-L&T or equivalent make. 3 pin 5/6/10 amps, modular socket outlet |
| 67 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required Make-L&T or equivalent make. |
| 68 | Supply, fitting and fixing of ceiling modular light 12 watt. Make - L&T or equivalent |
| 69 | GODREJ APEX QUEEN BED 78X72 (MAKE-GODREJ BOX PATTERN) |
| 70 | GODREJ ORTHO MATRRESS 78X72X5 (MAKE-GODREJ) |
| 71 | GODREJ PILLOW, NIXY 17X27X1 (MAKE-GODREJ) |
| 72 | BED SHEET WITH PILLOW COVER (MAKE-BOMBAY DYING SIZE:QUEEN SIZE) |
| 73 | GODREJ ENTERPRISE TABLE (MAKE-GODREJ) |
| 74 | GODREJ INTERIO KAREENA HIGH BACK CHAIR LEATHERETTE (MAKE-GODREJ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender