Tender For Construction Of Proposed Modern Hygenic Fish Market At Chatrapur Municipality In The District Of Ganjam, Odisha
Tender Value
3.38 Crore
Estimated cost
Bid Submission
24 Oct 2026
6 days left
EMD
3.38 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Proposed Modern Hygenic Fish Market At Chatrapur Municipality In The District Of Ganjam, Odisha
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in all kinds of soil for excavation of foundation with initial lead and lift including dressing and leveling the beds etc.complete finished . |
| 2 | Filling foundation & Plinth with sand well watered and rammed including all cost and complete finished in all respect. |
| 3 | Cement concrete (1:3:6) with 4cm HG crusher broken metal in foundation and plinth including all cost and complete finished |
| 4 | R.C.C.in M-20 using 20mm and downgraded HGCB chips including all cost and complete .(Rate 15 cum)1.RCC Base |
| 5 | RCC Column A. Ground Floor |
| 6 | B.First Floor |
| 7 | RCC plinth |
| 8 | RCC Lintel |
| 9 | Chajja |
| 10 | Roof Beam |
| 11 | RCC Slab |
| 12 | First Floor |
| 13 | RCC Wall |
| 14 | Providing reinforcement including labour charge for cutting bending binding of HYSD bars tying the grills placing in position including cost of bending work and cost of M.S rod including all cost & complete.(Rate for 10 Qtl)Ground floor |
| 15 | First floor |
| 16 | Brickwork with 1st.class Flyash.Bricks 25cmx12cmx8cm having crushing not less than 75kg/cm² in C.M (1:6) in superstructure including cost of all and complete finished in all respect. |
| 17 | Brickwork with 1st.class Flyash.Bricks 25cmx12cmx8cm having crushing not less than 75kg/cm² in C.M (1:6) in superstructure including cost of all and complete finished in all respect. |
| 18 | 16 mm thick CP in (1:6) over brick work including cost of all and complete etc. |
| 19 | 12 mm thick CP in (1:6) over brick work including cost of all and complete etc. |
| 20 | 12mm thick cement plaster in C.M (1:4) including punning for skirting including cost of all & complete finished. |
| 21 | 6 mm thick CP in (1:4) over RCC Surface including cost of all and complete finished in all respect.Ground floor |
| 22 | First floor |
| 23 | Supply, Fabrication, Erection of MS Structural Steel member as per drawings & direction of engineer in charge |
| 24 | Painting two coats over a coat of primer over new steel work including cost of all and complete |
| 25 | Finishing surface of walls with cement based wall putty [ water based ] of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes , labour T&P etc. complete. |
| 26 | Finishing plastered surfaces of walls with wall primer and making smooth to receive painting including cost of all and complate. |
| 27 | Finishing walls with weather coat of approved shade on new work two coats to give an even shade including cost of all and complete.Gound floor |
| 28 | First floor |
| 29 | Finishing walls with Plastic emulsion paint of approved shade on new work two coats to give an even shade including cost of all and complete. |
| 30 | Providing 2.5 cm thick grading concrete(1:2:2) using 6mm size HG Chips on new works including all cost of all and complete finished. |
| 31 | Fixing kadapa tiles in floors treads or steps and landing on 25 mm thick bed of CM(1:1) [ 1 cment : 1 sand ] jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete including cost of all and completefinished in all respect. |
| 32 | Fixing Kodappa tiles in dado skirting and risers of steps on 12 mm thick C.P (1:3) including cost of all and complete finished . |
| 33 | Fixing vitrified tiles in floors treads or steps and landing on 25 mm thick bed of CM(1:1) [ 1 cment : 1 sand ] jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete including cost of all and completefinished in all respect. |
| 34 | Fixing vitrified tiles in dado skirting and risers of steps on 12 mm thick C.P (1:3) including cost of all and complete finished . |
| 35 | Fixing ceramic tiles in floors treads or steps and landing on 25 mm thick bed of CM(1:1) [ 1 cment : 1 sand ] jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete including cost of all and completefinished in all respect. |
| 36 | Fixing ceramic tiles in dado skirting and risers of steps on 12 mm thick C.P (1:3) including cost of all and complete finished . |
| 37 | Fixing granite tiles in floors treads or steps and landing on 25 mm thick bed of CM(1:1) [ 1 cment : 1 sand ] jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete including cost of all and completefinished in all respect. |
| 38 | Fixing Granite tiles (Granite tiles above 0.4sqm.20mm thick) in dado skirting and risers of steps on 12 mm thick C.P (1:3) including cost of all and complete finished . |
| 39 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame, shutters and all fittings & fixtures. |
| 40 | Fixing chequered tiles in floors treads or steps and landing on 25 mm thick bed of CM(1:1) [ 1 cment : 1 sand ] jointed with neat cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete including cost of all and completefinished in all respect. |
| 41 | Supplying, fitting and fixing of openable UPVC doors with door frame of approved make with 6 mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures. |
| 42 | Supply, fitting & fixing of precoated galvanised iron profile sheet semi gloss of 1000mm width & total coated thickness 0.5mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties, etc complete including cost of sheet & all fittings. |
| 43 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull peration complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. |
| 44 | Providing and fixing ball bearing for rolling shutters. |
| 45 | Supplying and installing Cold storage of approaved make including all the cost and T&P as per the direction of EIC |
| 46 | Fire extiguinsher |
| 47 | CONSTRUCTION OF PRE-CAST COMPOUND WALL WITH MAIN GATEEarthwork in all kinds of soil for excavation of foundation with initial lead and lift including dressing and leveling the beds etc.complete finished |
| 48 | Filling foundation & Plinth with sand well watered and rammed including all cost and complete finished in all respect. |
| 49 | Cement concrete (1:3:6) with 4cm HG crusher broken metal in foundation and plinth including all cost and complete finished |
| 50 | R.C.C.in M-20 using 20mm and downgraded HGCB chips including all cost and complete .(Rate 15 cum)RCC Base |
| 51 | RCC Column |
| 52 | RCC Plinth |
| 53 | RCC Beam |
| 54 | Providing reinforcement including labour charge for cutting bending binding of HYSD bars tying the grills placing in position including cost of bending work and cost of M.S rod including all cost & complete.(Rate for 10 Qtl) |
| 55 | Fixing Granite tiles (Granite tiles above 0.4sqm.20mm thick) in dado skirting and risers of steps on 12 mm thick C.P (1:3) including cost of all and complete finished . |
| 56 | Providing, fitting, fixing of pre-cast compound wall made up of pre-cast slab of 2.0 Mtr. Length & 50 mm thick & pre cast post of (0.15x0.15)Mtr size & 2.40 M height and fixing the pre cast slab upto a height of 1.50 Mtr including cost, conveyance, all taxes, royalties, etc required to complete the work finished in all respect. |
| 57 | Finishing plastered surfaces of walls with wall primer and making smooth to receive painting including cost of all and complate. |
| 58 | Finishing walls with weather coat of approved shade on new work two coats to give an even shade including cost of all and complete. |
| 59 | Supply, Fabrication, Erection of MS Structural Steel member as per drawings & direction of engineer in charge |
| 60 | Priming 1 coat over new steel work including cost of all and complete finished data for 9.30sqm. |
| 61 | CONSTRUCTION OF DRAINEarthwork in all kinds of soil for excavation of foundation with initial lead and lift including dressing and leveling the beds etc.complete finished . |
| 62 | Filling foundation & Plinth with sand well watered and rammed including all cost and complete finished in all respect. |
| 63 | Cement concrete (1:3:6) with 4cm HG crusher broken metal in foundation and plinth including all cost and complete finished |
| 64 | R.C.C.in M-20 using 20mm and downgraded HGCB chips including all cost and complete .(Rate 15 cum)BASE |
| 65 | Providing reinforcement including labour charge for cutting bending binding of HYSD bars tying the grills placing in position including cost of bending work and cost of M.S rod including all cost & complete.(Rate for 10 Qtl) |
| 66 | CONSTRUCTION OF PAVING AND PARKINGEarthwork in all kinds of soil for excavation of foundation with initial lead and lift including dressing and leveling the beds etc.complete finished . |
| 67 | Filling foundation & Plinth with sand well watered and rammed including all cost and complete finished in all respect. |
| 68 | Cement concrete (1:3:6) with 4cm HG crusher broken metal in foundation and plinth including all cost and complete finished |
| 69 | P.C.C.in M-20 using 20mm and downgraded HGCB chips including all cost and complete .(Rate 15 cum) |
| 70 | Supplying and fixing 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 |
| 71 | WATER SUPPLY & SANITARY INSTALLATION TO FISH MARKET AT CHHATRAPURSupplying all materials,labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar(1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete as per specification. 250 MM thick wall |
| 72 | Supplying all materials,labour and T&P for cutting holes in R.C.C. floors, roofs,or cornice including making good and leak proof to the damages for taking sand cast iron [SCI] / centrifugally cast[spun] iron pipes . pipes and fittings including mending good to the damages etc. all complete as per direction of the Engineer-in-charge. RCC Roof/Cornice |
| 73 | Providing and fixing to wall or ceiling and floor rigid PVC pipes conforming to ASTM-D-1785/89[Sch-80] and pipe fittings of the following nominal bore with clamps including making good the wall , ceiling and floor all complete as per specification. 25 mm. Diameter |
| 74 | 50 mm Diameter |
| 75 | Supplying all materials,labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the amages all complete as per specification. |
| 76 | Laying in trenches unplasticised PVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification compete.[Earth work in trenches to be measured and paid for separately]75mm dia rigid UPVC pipe class - 3 [0.60mpa] |
| 77 | 110mm dia rigid UPVC pipe class - 3 [0.60mpa] |
| 78 | Providing and fixing on wall face unplasticised rigid PVC soil waste and rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion [i] Single socket pipes.110mm dia |
| 79 | Supplying all labour and T&P for fixing CP Angular stop cocks polished bright confirming to IS:781-1995 of the following nominal sizes as per specification all complete . |
| 80 | Supplying all labour and T&P for fixing long body bib cock of the following size as per specification all complete (including cost of cock ) |
| 81 | Supplying all materials,labour and T&P for fixing CP Gratings of the following nominal diameter of outlet, of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm including cutting and making good to the walls and floors etc. all complete as per specification. |
| 82 | Supplying fitting fixing of CP waste of the following noninal diameter for wash hand basin and sink as per specification. |
| 83 | Supplying fitting fixing of 15mm dia PVC inlet connection pipe and making connectiion with piller cock and supply mains for wash basin complete as per specification. |
| 84 | Supplyingfitting fixing of PVC waste pipe of following nominal diameter of wash basin or sink inclusing brass check nut complete as per specification. |
| 85 | Supplying all labour and T&P for fixing Brass /Gunmetal full way valve confirming to IS:781-1995 of the following nominal sizes as per specification all complete. 25mm |
| 86 | Providing and fixing on wall face unplasticised rigid PVC moulded fittings / accessories for unplastidsied rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gape for thermal expantion.87.5° Plain Bend 75 mm Ø |
| 87 | 110 mm Ø |
| 88 | 110 mm Ø 87.5° Door Bend |
| 89 | 110 mm Ø Plain \\"Y\\" |
| 90 | 110 mm Ø Door \\"Y\\" |
| 91 | 110 mm Ø PVC Clip |
| 92 | Supplying all materials,labour and T&P for fixing corner wash hand basin with hole for pillar taps confirming to IS 2556:part4-2004 with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification. |
| 93 | Supplying all materials,labour and T&P for Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral \\"S\\" or \\"P\\" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification. |
| 94 | Supplying all materials,labour and T&P for fixing glazed earthen-ware squatting plate of size (600 mmx350mm.) confirming to IS : 2556-part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm. cement mortar (1:8) laid over 150mm. cement concrete (1:4:8) using 40mm. size h.b.g. chips all complete as per specification. |
| 95 | Supplying all materials,labour and T&P for fixing of PVC10.00 ltr capacity low level flushing cistern with manually controlled device[handle cover] confirming to IS 7231 with fittings and fixtures etc. all complete as per specification. |
| 96 | Supplying all materials,labour and T&P for fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffe all complete as per specification. |
| 97 | Supplying fitting fixing of C.P health foucet highpressure lettered Hot and cold with long screws shanks and back nuts of the following nominal bore as per specification. |
| 98 | Supplying all materials,labour and T&P for fixing standard size glass self with chromium plated brass brackets and guard rails fixed to wooden plugs with chromium plated brass screws and washe etc. all complete as per specification. |
| 99 | Supplying all materials,labour and T&P for fixing of [A] liquid soap container - glass container or plastic container with chromium plated brass lid and brackets fixed to wooden plugs with chromium plated brass screws [B] cromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws [ C] white glased tooth brush holder fixed to wooden plugs with chromiumplated brass screws as per specification |
| 100 | Supplying all materials,labour and T&P for fixing of 600x450 bevelled edge mirror of superior glass mounted on 6mm thick ac sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washe etc. All complete as per specification . |
| 101 | Supplying all materials,labour and T&P for fixing Bowl pattern urinal conforming to IS :2556: part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265mm sizes respectively with waste pipe by means of white lead mixed with choppedhempetc. all complete as per specification. |
| 102 | Supplying all materials,labour and T&P for fixing stainless steel AISI 304 [18/8] Kitchen sink as per IS 13983 with cast iron bracet and stainless steel plug including painting of fittings and brackets ,cutting and making good to the walls etc. all as per specification including cost of sink with all accessories. |
| 103 | CONSTRUCTION OF 200MM X 150MM DIA PRODUCTION WELL Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of rig with its accessories, T & P and consumables etc. for lowering of 200mm/150mm dia GI/PVC/MS pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard & boulder formation (GI/PVC/MS) Casting pipes it required to prevent collapse of over burden is to be provided by contractor including lowering andwithdrawing after completion of the tubewell. |
| 104 | Lowering the following sizes of GI/PVC/MS casing pipe with or without slotted pipes as per the necessecity from ground level upto 45.00 mtrs depth and fitted & fixed of in perfectly vertical position including cutting & threading of pipes & slotted pipes & supplying & fixing all jointing materials T&P etc. all complete and keeping the top of casing pipe threaded including plugging tubewells to prevent entry of foreign materials. |
| 105 | Cleaning & Developing the tubewell with their own compressors continiously worked all clear and adequate discharge is obtained from the tubewell including supply & use of all necessery equipments and labour as per Direction of Engineer-in-charge. |
| 106 | Supplying all materials & labour T&P and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 Mtr below ground level as per drawing to plug the bore hole excluding cost cement all complete as per the direction of Engineer-in-charge. Minimum one Mtr of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing ,(Excluding cost of cement which will be supplied directly by the department). |
| 107 | Supplying all materials, labour, T&P and withdrawing casing pipes from the unsuccessful bore and depositing in the departmental R.W.S & S store in good condition |
| 108 | supplying all labour, T & P and materials for Packing the bore eith washed gravel (size P-6 ) around the pipes in good quality excluding cost of gracel etc. Complete as per the direction of the Engineer-in-Charge,. |
| 109 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 110 | CONSTRUCTION OF EFFLUENT TREATMENT PLANT (E.T.P)Earthwork in all kinds of soil for excavation of foundation with initial lead and lift including dressing and leveling the beds etc.complete finished . |
| 111 | Filling foundation & Plinth with sand well watered and rammed including all cost and complete finished in all respect. |
| 112 | Cement concrete (1:3:6) with 4cm HG crusher broken metal in foundation and plinth including all cost and complete finished |
| 113 | R.C.C.in M-20 using 20mm and downgraded HGCB chips including all cost and complete .(Rate 15 cum)END WALL |
| 114 | END WALL |
| 115 | PARTITON |
| 116 | Providing reinforcement including labour charge for cutting bending binding of HYSD bars tying the grills placing in position including cost of bending work and cost of M.S rod including all cost & complete.(Rate for 10 Qtl) |
| 117 | Providing 2.5 cm thick grading concrete(1:2:2) using 6mm size HG Chips on new works including all cost of all and complete finished. |
| 118 | 16 mm thick CP in (1:6) over brick work including cost of all and complete etc. |
| 119 | Constructing manholes with RCC top slab in RCCM20, foundation concrete (1:3:6), inside & ouside plaster 12 mm thick cement mortar (1:4) finished with neat cement punning, brick work with flyash brick having crushing strength not less than 75kg/cm² with dimensional tolerance ±8 percent in cement mortar (1:5) cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. |
| 120 | provision for filter media, chamber 1 |
| 121 | chamber 2 |
| 122 | chamber 3 |
| 123 | chamber 4 |
| 124 | chamber 5 |
| 125 | CONSTRUCTION OF SEPTIC TANKEarthwork in all kinds of soil for excavation of foundation with initial lead and lift including dressing and leveling the beds etc.complete finished . |
| 126 | Filling foundation & Plinth with sand well watered and rammed including all cost and complete finished in all respect. |
| 127 | Cement concrete (1:3:6) with 4cm HG crusher broken metal in foundation and plinth including all cost and complete finished |
| 128 | R.C.C.in M-20 using 20mm and downgraded HGCB chips including all cost and complete .(Rate 15 cum)RCC Beam |
| 129 | RCC Slab |
| 130 | P.C.C.in M-20 using 20mm and downgraded HGCB chips including all cost and complete .(Rate 15 cum) |
| 131 | Providing reinforcement including labour charge for cutting bending binding of HYSD bars tying the grills placing in position including cost of bending work and cost of M.S rod including all cost & complete.(Rate for 10 Qtl) |
| 132 | Brickwork with 1st.class Flyash.Bricks 25cmx12cmx8cm having crushing not less than 75kg/cm² in C.M (1:6) in superstructure including cost of all and complete finished in all respect. |
| 133 | 12mm thick cement plaster in C.M (1:4) including punning for skirting including cost of all & complete finished. |
| 134 | ELECTRICAL INSTALLATION Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 5A ,25 on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge. (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/ Great White/HPL) Group-A |
| 135 | Group-B |
| 136 | Group-C |
| 137 | Supplying and fixing of 6 Amp plug with 6 Amp switch on existing board (Make-Legrand/ /Mylinc/ Schneider clipsal/ Hager insysta/ Anchor Dura/ or equivalent) Including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge. |
| 138 | Supplying, fitting and fixing of Multipurpose board consisting 3 nos 6 Amp plug and switch modular on metal box and modular cover with all connection (Make-Legrand/ /Mylinc/ Schneider clipsal/ Hager insysta/ Anchor Dura/ or equivalent) Including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge. |
| 139 | Supplying, fitting & fixing of Different type of fan (Make- Crompton/Usha/Polycab/Orient/Havells/Khaitan,etc) including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge.Heavy Duty |
| 140 | Exhaust Fan 12\\" |
| 141 | Wall mounted fan |
| 142 | Ceiling fan |
| 143 | Supplying, fitting & fixing of different type of LED lights including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge.(Make- Havells/ Crompton/ Wipro/ Panasonic/ Philips)20 Watt 4' LED tube lights |
| 144 | Supply and fixing of LED street light(Make - Havells/Cromption/Wipro/Panasonic/Philips) including all accessories and connection including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge.45 Watt LED street light |
| 145 | Supplying and fixing of following different DD DB BOX (make- Havells/ C&S/ L&T) including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge.6way SPN DD DB BOX. |
| 146 | Supply and fixing of 6 Amp to 32A rating 240V/ 415V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connection testing and commissioning etc, (make- havells/ C&S/ L&T) including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge.6 to 32 SP MCB |
| 147 | Supply & Fixing of Different Ac Machine (STAR RATED) (Carrier/ Voltas/ Bluestar/ Hitachi) |
| 148 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in recessed PVC conduit as required including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/Great White/HPL) 2 X 2.5 Sq.mm +1 X 1.5 Sqmm |
| 149 | 2 X 4.0 Sq.mm +1 X 1.5 Sqmm |
| 150 | 2 X 6.0 Sq.mm +1 X 1.5 Sqmm |
| 151 | Supply and fixing copper plate earthing 600mm X 600mm X 3.15mm thick ISI marked including all accessories and providing masonary with charcoal and salt as required, including cost, conveyance, royalties, taxes of all materials, cost of labour, labour cess, T&P etc. required for the work complete as per the direction of Engineer-in-Charge. |
| 152 | Quality Control @ 1% on Civil Work |
| 153 | Contigency @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender