Tender For Permanent Restoration/Construction Of Link Road From Matar Morh To Mohalla Miran Tranwali. (Under Sdrf)
Tender Value
3.02 Crore
Estimated cost
Bid Submission
22 Oct 2026
7 days left
EMD
6.04 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Permanent Restoration/Construction Of Link Road From Matar Morh To Mohalla Miran Tranwali. (Under Sdrf)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2026 | Corrigendum No-1 | Other | 22-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : 50%Ordinary Rock 30%Hard Rock (Blasting Prohibited) 20% |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 9 | Retaining walls, return walls, walls (any thickness) including attached pilastersbuttresses, plinth and string course fillets, kerbs andsteps etc. |
| 10 | Suspended floors, roofs, landings, balconies and access platforms. |
| 11 | Edges of slabs and breaks in floors and walls Above 20 cm wid |
| 12 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone |
| 13 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 14 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 15 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 16 | Dry stone pitching, 225mm thick, including cost of stones andpreparation of surface. Nallah stone |
| 17 | Hand Packed stone in wire crate including the cost of stone and wire crate complete job. |
| 18 | Supplying and stacking at site Graded crushed stone aggregate of size 2 63 mm to 45 mm |
| 19 | Stone screening of size 13.2 mm nominal size (Type A) |
| 20 | Supplying and stacking at site Graded crushed stone aggregate of size 53 mm to 22.4 mm |
| 21 | Stone screening of size 11.2 mm nominal size (Type B) |
| 22 | Moorum |
| 23 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering andcompacting to the required density. |
| 24 | Dumping of stone in Horizental on level including the cost of stoen complete job. |
| 25 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 26 | Restoration of rain cuts,damage road surface patches by way of supplying & filling RBM in layers not exceeding 20cm in depth rolling each layer with power load roller including carriage from source to site including unloading stacking, laying watering dressing etc complete job. |
| 27 | Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete. Non-pressure NP-4 class (Heavy duty) R.C.C. pipes 900 mm dia. R.C.C. pipe |
| 28 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm. |
| 29 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) preparedin Batch Type Hot Mix Plant of 100-120 TPH capacity. |
| 30 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On bitumen surface @ 0.50 Kg/sqm |
| 31 | 2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt |
| 32 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. |
| 33 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 34 | Manufacturing supplying and fixing retro reflective sign boards made upof 2mm thick aluminum sheet, face to be fully covered with high intensityencapsulated type heat activated retro reflective sheeting conforming totype-IV of ASTM-D-4956-01 in blue and silver white or other colourcombination including subject matter, message (bi-lingual), symbols andborders etc. as per IRC : 67-2001, pasted on substrate by an adhesivebacking which shall be activated by applying heat and pressureconforming to class -2 of ASTM-D-4956-01 and fixing the same withsuitable sized aluminum alloy rivets @ 20cm c/c to back support frame ofM.S. angle iron of size 25x25x3mm along with theft resistant measuresmounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to avertical post made upto M.S. Tee section ISMT 50x50x6mm welded withbase plate of size 100x100x5mm at the bottom end and including makingholes in pipes, angle flats, providing and fixing M.S. message plate ofrequired size steel work to be painted with two or more coats of syntheticenamel paint of required shade and of approved brand & manufacture overpriming coat of zinc chromate yellow primer (vertical M.S.-Tee support tobe painted in black and white colours). Backside of aluminum sheet to bepainted with two or more coats of epoxy paint over and includingappropriate priming coats including all leads and lifts etc. complete as perdrawing, specification and direction of Engineer-in-charge.16.66.1 Mandatory/Regulatory sign boards of 900 mm diameter withpart as length of 3750 mm. |
| 35 | Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)kilometer stone as per standard design including finishing smooth in 1:3cement mortar ( 1cement : 3 fine sand) but excluding the cost of earthwork, concrete in foundation, painting and lettering etc. which shall bepaid for separately. 50x152.5x25 cm size. |
| 36 | Carriage of materials by Mechanical Transport including loading, unloading and stacking at site complete. Carriage of Sand/Stone aggrigate below 40 mm by an average distance of 20 km by M.T. |
| 37 | Carriage of Non-pressure NP-4 class (Heavy duty) R.C.C. pipes 3900 mm dia. R.C.C. pipe by an average distance of 90 km by M.T. |
| 38 | Carriage of Stone aggrigate above 40 mm nominal size by an average distance of 20 km by M.T. |
| 39 | Disposal of Mulba by an average distance of 01 km by M.T. |
| 40 | Carriage of Stone by an average distance of 05 km by M.T. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender