Tender For Restoration Of Rain Damages On Link Road To Village Dadri Km 0/0 To2/260 (Sh:- Providing And Laying Tarring /Patch Work On Various Rds Under Pnda 2025 )
Tender Value
15.54 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
6 days left
EMD
31082
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages On Link Road To Village Dadri Km 0/0 To2/260 (Sh:- Providing And Laying Tarring /Patch Work On Various Rds Under Pnda 2025 )
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting stone aggregates of 53 to 22.4mm (fifty three millimetre to twenty two point four millimetre) size 75mm (seventy five millimetre) compacted thickness to water bound macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grades and camber applying and brooming, stone screening type-\\"B\\" of size 11.2mm (eleven point two millimetre) nominal size at the rate of 0.18 cubic metre (zero point one eight cubic metre) per ten square metre to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-III as MORD Technical Specification section 400 by mannual means including hauling of material in all leads, lifts as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 2 | Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer at the rate of 0.85 kg. ( zero point eight five kilogram) per Square Metre) of road surface using mechanical means bitumen emulsion pressure distributor complete as per MORD technical Specification section 500 or as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 3 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.275 Kg. (zero point two seven five kilogram) per square metre on prepared granular surfaces treated with primer and cleaned with Hydraulic brooms as per Technical Specification Clause 503 or as directed by the engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 4 | Providing, laying and rolling of open-graded premix carpet of 20mm (twenty millimetre) compacted thickness composed of type-\\"A\\" 13.2 mm to 5.6 mm ( Thirteen decimal two millimetre to five decimal six millimetre ) aggregate at the rate of 0.27 cum (zero decimal two seven cubic metre) pre-mixed with bitumen binder grade VG-10 (Viscosity Grade ten) at the rate of 14.6 kg. (fourteen decimal six kilogram) per ten square metre of road surface to required line, grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in suitable hot mix plant 30/40 (thirty / forty ) tonne per hour capacity transporting mixed materials with tipper and laying manually to required grade and camber and rolling with three wheel 80-100 (eighty - hundred ) KN static road roller finished to required level and grades to be followed by seal coat of type-”B” complete as per MORD Technical Specification section 500 including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government. |
| 5 | Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B with bitumen grade VG-10 (Viscosity grade ten) at the rate of 6.8 Kg. (six decimal eight kilogram) premixed with 0.06 (zero decimal zero six) cubic metre of fine aggregate per ten square metre premixed in mini hot mix plant, transporting mixed material with tipper and laying of mixed materials manually and rolling with three wheel 80-100 (eighty- hundred ) KN static roller complete as per MORD Technical Specification section 500 including carriage of materials within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender