Tender For Installation Of 25 Kwp Off Grid Solar Plant At 10 Bops Of 43 Bn And 150 Bn Of Shq Bsf Gokulnagar Under Ftr Hq Tra ( Sh: Provision Of Separate Distribution Of Power Load Of Solar Power Plant Of 43 Bn And 150 Bn Bsf Under Shq Bsf Gknr).
Tender Value
25.82 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
10 days left
EMD
51641
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of 25 Kwp Off Grid Solar Plant At 10 Bops Of 43 Bn And 150 Bn Of Shq Bsf Gokulnagar Under Ftr Hq Tra ( Sh: Provision Of Separate Distribution Of Power Load Of Solar Power Plant Of 43 Bn And 150 Bn Bsf Under Shq Bsf Gknr).
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc as required. Group B |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 3 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/ HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (iii) 2 X 4 sq mm + 1 X 4 sq mm earth wire |
| 4 | Supplying and fixing suitable size of GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 5/6Amp & 15/16 Amp modular socket outlet and 15/16Amp modular switch,connection etc as required. pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc. as required. |
| 5 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connection, painting etc. as required. |
| 6 | Supplying and fixing 6 way Double door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) |
| 7 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 9 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connection, testing and commissioning etc. as required. |
| 10 | Earthing with GI earth pipe 4.5 metre long x 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required |
| 11 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. |
| 12 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 13 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required |
| 14 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 15 | Supplying and laying of PVC insulated and PVC sheathed Aluminium conductor power cable of 1.1 KV grade of 2 X 16 sqmm size in the existing RCC/ HUME/ METAL pipe/DWC pipe as required.Make-Havells/Polycab/Finolex/KEI |
| 16 | Supplying and Laying of one number XLPE insulated and PVC sheathed aluminium armoured power cable of 1.1 KV grade of size 3.5x25 sqmm sq mm direct in the existing open duct /RCC/ HUME/ METAL pipe as required. Make-Havells/Polycab/Finolex/KEI |
| 17 | Providing and fixing of 63 Amp TPN busbar chamber with SS enclosure on existing wall surface including connection etc requried Make Indoaisan or equivalent to Havells/Schneider/Legrand etc. |
| 18 | SITC of control Panel indoor type, double door made out of 2 mm CRCA sheet duly primed with synthetic enamel gray paint of size not less than 1200 mm X 1000 mm X 400 mm deep having 200 A, 04 nos insulated aluminium bus bars, R-Y-B LED indicators, angle iron frame of 1000 mm X 400 mm with 400 mm long legs made out of 40 mm x 40 mm x 5 mm thick angle , grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, P&F of internal connection with suitable size of cu wires, cable termination, earthing, locking, interconnection and to accommodate the following accessories etc as required as per direction of Engineer-In-Charge. (i) 125 Amp onload change over switch open execution 01 No (ii) 63 Amp Three Pole 10 KA MCCB -03 Nos, (iii) 32 Amp Three Pole 10 KA MCB -02 Nos,(iv) DP Isolator 63 Amp -05 Nos, (v) DP Isolator 32 Amp- 03 Nos. |
| 19 | Providing & fixing MCCB, 250 amps, 3 pole, breaking capacity 25 KA, with suitable operating mechanism extended rotary handle in existing cubicle panel board including drilling holes in cubicle panel, making connections and dismentling of existing Switch gears etc. as required. |
| 20 | Providing and fixing of 160 Amp , 4 Pole MCX 32 power contractor in existing cubicle panel board etc as required. Make -L&T code No.CS97020, or its compatible to Havells / Indoasian/ Standard/ legrand/ ABB.. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender