Tender For Estimate For Laying 250Mm Dia Upvc Up Gradation Pipeline For Outlet Rd 9200/R Of Shahpurkandi Channel No. 3 For Year 2026-27
Tender Value
27.33 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
5 days left
EMD
54674
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Laying 250Mm Dia Upvc Up Gradation Pipeline For Outlet Rd 9200/R Of Shahpurkandi Channel No. 3 For Year 2026-27
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Oct-2026 | Corrigendum12102026 | Date | 14-Oct-2026 |
| 2 | 16-Oct-2026 | Corrigendum16102026 | Date | 23-Oct-2026 |
| 3 | 14-Oct-2026 | Corrigendum14102026 | Date | 16-Oct-2026 |
| 4 | 29-Oct-2026 | Corrigendum29102026 | Date | 05-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including anddressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation , including the cost of diversion for traffic, crossing overtrenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect Depth upto 1.5 mtr. |
| 2 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth includingdressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layerswith compaction including disposal of all surplus soil as directed within lead of 30 metres |
| 3 | First class brick masonary 229 mm thick laid in cement sand mortar 1.6 in foundation and plinth including supply recarriage of bricks cement |
| 4 | 10mm thick cement plaster 1.4 on sides walls |
| 5 | 10mm thick cement plaster 1:4 on bed and top. |
| 6 | Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement |
| 7 | Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle |
| 8 | Cement concrete 1:4:8 with brick ballast 40mm gauge |
| 9 | Laying and jointing of UPVC pipe250 mm dia of 2.5 kg/ sq cm pressure ISI Marked UPVC Pipes as per ISI- 4985 along the Trenches and laying the same inTrenches to correct alignment and gradients, cutting, jointingand testing complete as per specifications |
| 10 | Providing, laying, fixing, testing and commissioningof Class heavy duty MS Pipe conforming to IndianStandard IS:1239/3589 including fittings like tees, bends,sockets, elbows, flanges, tapers, nutsbolts, gasketsetc. fixing the pipe on the wall /ceiling with suitable clamp sandpainting with two or more coats of syntheticepaint of required shade complete in all respects. (d)50mm internal diameter |
| 11 | Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank |
| 12 | Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 havingminimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm |
| 13 | Providing and fixing of Alfa Alfa Valve250 mm dia fitted on riser pipe to act as Nakka (D regulators) |
| 14 | Centering and Shuttering for Concrete faces |
| 15 | Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in all respect |
| 16 | Providing and fixing 250 mm Elbow/bends of 90 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to thespecification of engineer in charge |
| 17 | Providing and fixing 250 mm equal Tee of 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer incharge |
| 18 | Providing and fixing MS service saddle 250 x 50mm as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 19 | Providing and fixing Tail end piece 250 mm of 6 kg/cm2 pressure as per IS 4985 i/c testing commisioning complete in all respect to the satisfaction of engineer incharge |
| 20 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (250mm) ISI marked 14846-2000, includingjointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). B) Class PN-1.6 as per ISI |
| 21 | Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing all carriages complete .C.I Single air valve (Size 50mm) |
| 22 | Providing and fixing 250mm dia socket (6Kg/cm2 Pressure) Conforming to IS Codes with latest ammendments if any at site work including loading unloadingand rehandling if any in complete respect as per design and pwd specifications and instructins of engineer-in-charg |
| 23 | Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.9x0.9m |
| 24 | (Loading & Unloading )PVC Pipes |
| 25 | (Carriage)PVC/HDPE Pipes all size (Truck load 2.20 tonnes) from dump site to site of work (5 km) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 23, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 16, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 05, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender