Tender For Stage Contract For Maintenance Of Roads & Bridges (P/L Of Reinforced Cement Concrete Pipes/Clearance Of Drains, Repair/Renovation Of Drains, retaining wall Slip Clearance (Part Ii) Sub Division Gurez
Tender Value
7 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
1 days left
EMD
14000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stage Contract For Maintenance Of Roads & Bridges (P/L Of Reinforced Cement Concrete Pipes/Clearance Of Drains, Repair/Renovation Of Drains, retaining wall Slip Clearance (Part Ii) Sub Division Gurez
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soil. |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil. |
| 3 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 4 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 6 | Supply and filling of RBM/GSB/Nallah Muck/Stone soling of specified size including spreading , watering , ramming , compacting with PRR including all carriages. |
| 7 | Supplying, stacking , laying , spreading and compacting of Graded crushed stone agg. Of (63mm to 45mm size) WBM GII in uniform thickness including rolling with PRR 8-10 Tone capacity in stages to proper grade and camber applying and brooming requisite type of stone screening 13.2mm size and binding material to fill up the interstics of coarse agg. watering compacting to required density (finished work shall be paid) with all leads, lifts and carriages as involved upto site of work complete job. |
| 8 | Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. |
| 9 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means) |
| 10 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. |
| 11 | Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.25 mm compacted thickness with bitumen of grade VG-10 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. |
| 12 | Providing and laying seal coat of premixed fine aggregate (passing 2.36mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. |
| 13 | Dressing of shoulders / Berms by way of removal of humps and filling of depressions , replenishing / lowering earthen / hard shoulders using available earth / material from a lead of 15 mtrs. including removing vegetation and in-equalities. |
| 14 | Providing & Laying stone soling including spreading, watering, ramming, compacting including all carriages. |
| 15 | Slip clearance in ordinary soils disposal lead upto 50 m and lift upto 1.5 m |
| 16 | Slip clearance in soils , mixed with moorum/kankar/shingle/big boulders disposal lead upto 50 mtr and lift upto 1.5mtr. |
| 17 | Removal of Rocks, big boulders obstructing or any other heavy material by engaging labours. |
| 18 | Silt clearance from Drains , culverts Inclusive of initial lead and lift (50m & 1.5m respectively ) in wet conditions |
| 19 | Clearance of blocked cross Drainage pipes including disposal and carriage Complete job |
| 20 | Providing and laying of RCC pipes in proper position and Grade including cutting of road surface by mechanical menas upto required depth & providing proper cushion rammed making even surface including all carriages.300mm Dia. |
| 21 | 400mm Dia |
| 22 | 450mm Dia |
| 23 | 600mm Dia |
| 24 | 900mm Dia |
| 25 | Engagement of Skilled labour for prunning of trees and cutting of bushes , prunning of shrubs. |
| 26 | Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete on new surface. |
| 27 | Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm. |
| 28 | Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm. |
| 29 | Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The Glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 +/- 5 degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. |
| 30 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).Overhead informatory road signage. |
| 31 | Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge |
| 32 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 33 | Providing and fixing of Galvanized metal Beam crash barrier including concrete blocks in 1:3:6 complete job |
| 34 | Earth work in bulk excavation over areas not (exceeding 30 cm in depth, 1.5m mtr in width as well as 10 sqm on plain )in disposal excavated earth and lift up to 1.5 mtr, disposal earth to be leveled and neatly dressed (All kinds of soil) |
| 35 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge.1:3:6 or richer mix |
| 36 | 1:4:8 or leaner mix |
| 37 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 38 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: in cement mortar. |
| 39 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 40 | Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge: |
| 41 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 42 | Dismantling of flushing cistern of all types(C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead |
| 43 | Dismantling old protection work including cutting of crates and stacking of stones. |
| 44 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps :150 mm diameter |
| 45 | 300 mm diameter |
| 46 | 400 mm diameter |
| 47 | 450 mm diameter |
| 48 | Backfilling of Stone boulders hand packed behind the R/Wall including carriage complete job |
| 49 | Engagement of Skilled carpenter for repairement of wooden chairs,doors and other works. |
| 50 | Providing and fixing elecrtical points including wiring, channels, holders and other required accessories complete job. |
| 51 | Providing and fixing electrical heating points including wiring, channels, socket and other required accessories complete job |
| 52 | Supply/Installation/Testing and Commissioning of 12W LED Conceal (Commercial Type) light luminary fitting, round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70. The Input voltage shall be 150V to 270V. The Fixture should have In-built Surge Protection of 2kV. Certification- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacements of fixtures of Philips/Havells/Wipro/Jaquar/Eq.make |
| 53 | Supply/Installation/Testing and Commissioning of 18W LED Conceal (Commercial Type) light luminary fitting, round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70. The Input voltage shall be 150V to 270V. The Fixture should have In-built Surge Protection of 2kV. Certification- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacements of fixtures of Philips/Havells/Wipro/Jaquar/Eq.make |
| 54 | Providing and fixing manhole cover (C.I) 600x600mm size complete as per directions of EIC. |
| 55 | Carriage of Material By MT Stones (Local hard stones) from avg lead above 20km |
| 56 | Sand+Stone Agg for 10km avg lead |
| 57 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level ;Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 58 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ liter. |
| 59 | Providing of signage/information board of approved size with two or more coat including the cost of painting and writing letters and boarders fixed in cement concrete 1:3:6 complete job. |
| 60 | Painting with synthetic enamel paint on wood/Steel works of approved brand and manufacture of required colour to give an even shade two or more coats 0n new work complete job. |
| 61 | Supply/filling of stones in wire crates (dry hand packed tightly) using Nallsh boulders/Quarry or Local stones, including dumping, cost of stones, wire crates, knitting of crates and all other equipment charges and carriage involved complete job |
| 62 | Opening out old wire crates those and re-binding after filling. |
| 63 | Engagement of JCB on hourly basis |
| 64 | Engagement of manual labour on day basis as per requirement all complete as per directions of Engineer in charge |
| 65 | Hiring charge of vehicles for site inspections in urgent cases |
| 66 | Welding , including transportation of plant at site etc complete job.by gas plant |
| 67 | by electric plant |
| 68 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats) |
| 69 | Providing/Fixing High rib colour coated sheets 0.50mm roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers, complete(upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.incl.all costs and carriage upto site of work. 0.50mm thick. |
| 70 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 71 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 72 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 73 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 74 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 75 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level .1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 76 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 77 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 78 | Centering and shuttering including strutting, propping etc. and removal of form for.Foundations, footings, bases of columns etc. for mass concrete. |
| 79 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 80 | Suspended floors, roofs, landings, balconies and access platforms. |
| 81 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 82 | Columns, pillars, piers, abutments, posts and struts. |
| 83 | Stairs (excluding landings) except spiral staircases. |
| 84 | Spiral staircases (including landings) |
| 85 | Edges of slabs and breaks in floors and walls, Under 20 cm wide |
| 86 | Edges of slabs and breaks in floors and walls, Above 20 cm wide |
| 87 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand).and extra for brick work. |
| 88 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) B.Nallah |
| 89 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone, Nallah |
| 90 | Dry random rubble masonry with hard stone in foundation and plinth:Without bond stone, Nallah |
| 91 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete, 50 mm thick with 20mm nominal size stone aggregate. |
| 92 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 93 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, Size of tile 600x600 mm |
| 94 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 95 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, 2 mm thick |
| 96 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 97 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 98 | Providing and fixing on wall 50 Ltrs electric geyser of make jaquar,Havels,venus or Equivalent as per directions of E.I.C with necessary fitting etc.all complete job. |
| 99 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (Type-B Medium)15 mm dia. nominal bore |
| 100 | 20 mm dia. nominal bore |
| 101 | 25 mm dia. nominal bore |
| 102 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in-charge. Internal work.PN-16 Pipe , 25mm OD(SDR-7.4) |
| 103 | PN-16 Pipe , 32mm OD(SDR-7.4) |
| 104 | PN-16 Pipe , 40mm OD(SDR-7.4) |
| 105 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood |
| 106 | Providing refreshment(Food items) in break fast, lunch, dinner etc for VIPS,VVIPS, serving complete job as per directions of Engineer in charge |
| 107 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work |
| 108 | Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) complete |
| 109 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand). |
| 110 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 111 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 112 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 113 | Providing and Laying of 150 mm dia MS Pipe of 6mm thickness including all carriage, complete job |
| 114 | Providing and Laying of 200 mm dia MS Pipe of 6mm thickness including all carriage, complete job |
| 115 | Providing and Laying of 300 mm dia MS Pipe of 6mm thickness including all carriage, complete job |
| 116 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender