Tender For Rrd On T.P.T.S. Road Km. 0/00 To 11/00. (Sh:- Construction of Retaining Wall At Rd 9/940 To 9/952 & Construction of Wire Crate Retaining Wall At Rd 6/260 To 6/275.) Under Pdna 2025.
Tender Value
12.09 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
4 days left
EMD
24200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rrd On T.P.T.S. Road Km. 0/00 To 11/00. (Sh:- Construction of Retaining Wall At Rd 9/940 To 9/952 & Construction of Wire Crate Retaining Wall At Rd 6/260 To 6/275.) Under Pdna 2025.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation for structures for all kinds of soil as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50m (fifty metre), dressing of sides and bottoms and back filling in trenches with excavated suitable material in ordinary soil upto 3m (three metre) depth including entire carriage of material within all leads and lifts as per entire satisfaction and direction of Engineer-in-Charge. |
| 2 | Providing and laying 1:5:10 (One cement : five sand : ten graded crushed stone aggregate 40mm (Forty millimetre nominal size) concrete for plain/reinforced concrete in open foundations and curing complete including form work as per drawing and technical specification clauses 802, 803, 1202 and 1203 including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-charge. |
| 3 | Providing weepholes in brick masonry/ stone masonry / plain/ reinforced concrete abutment , wing wall, return wall with 100mm diameter (one hundred millimetre diametre) PVC pipe extending through the full width of the structures with slope of 1V:20H (one vertical isto twenty horizontal) towards drawing face complete as per drawing and technical specifications clauses 614,709,1204.3.7 including carriage of material and other incidentals as per direction of Engineer-in-Charge. |
| 4 | Back filling behind abutment, wing wall and return wall complete as per drawings and technical specifications clause 1204.3.8 Granular material complete within all leads, lifts carriage of material and other incidentals as per direction of Engineer-in-Charge. |
| 5 | Providing and laying of boulder apron laid in wire crate with 4mm (four millimetre) dia. GI wire conforming to IS:280 and IS:4826 in 100x100 mm (one hundred into one hundred millimetre) mesh (woven diagonally) including 10 (ten) percent extra for laps and joints laid with stone boulders weighing not less than 25 kg (twenty five kilogram) each ( wire crate will be supplied by the department free of cost) as per drawing and technical specifications clause 1301 complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 6 | Providing and Erecting type-A \\"W\\" metal beam crash barrier comprising of 3mm (Three millimetre) thick corrugated sheet metal beam rail 70 cm (Seventy centimetre) above road/ground level fixed on ISMC series channel vertical post 150X75X5mm (one hundred fifty into seventy five into five millimetre) spaced 2m (Two metre) centre-to-centre 1.8m (one point eight metre) high 1.1 m (one point one metre) below ground/road level all steel parts and fitments to be galvanized by hot dip process all fitting to conform to IS: 1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150X75X5mm (one hundred fifty into seventy five into five millimetre) 300 mm (Three hundred millimetre) long complete as per clause 810 including carriage of materials with in all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender