Tender For Repair Of 02 Nos. Existing Toilet Blocks Consisting Of 04 Nos. Toilet And 02 Nos. Bathrooms With Running Water Facility At D/137 Bcs, Roun Village, Udh Ur (J&K).
Tender Value
3.47 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
7 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of 02 Nos. Existing Toilet Blocks Consisting Of 04 Nos. Toilet And 02 Nos. Bathrooms With Running Water Facility At D/137 Bcs, Roun Village, Udh Ur (J&K).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in while cement mixed with pigment of shade complete. |
| 3 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacture), of 1st quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, FUME Red, Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 coarse sand), joining with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc. complete. |
| 4 | Dismantling W.C. pan of all sizes including disposal of dismantled materials i/c malba all complete as per complete as per directions of by Engineer-in-Charge. |
| 5 | Providing and fixing water closet squatting pan (Indian typeW.C. pan) with 100 mm sand cost iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whenever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc, complete and stacking within 50 meters lead : Of area 3 sq. meters and below |
| 7 | 35 mm thick factory made solid panel PVC Door shutter, made out of single piece extruded solid PVC profiles, 5 mm (+ 0.2 mm) thick, having styles & rails ( except lock rail) of size 95 mm x 35 mmx5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered on both size), having one size thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40mm x 20 mmx1mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm x100mm of cross section size 35 mm x 17 mm x1 mm at each corner, single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacture’s specification and direction of by Engineer-in-Charge. Non decorative finish (matt finish) |
| 8 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vittreous China Flat back wash besin size 55x400 mm with single 15 mm PTMT pillar cock. |
| 9 | Providing and fixing P.V.C. waste pipe for sink and wash basin including. Semi rigid pipe.32 mm dia |
| 10 | Providing and fixing uplasticised PVC connection pipe with brass unions.45 cm length.15 mm nominal bore |
| 11 | Providing and fixing C.P. brass angle value for basin mixer and geyser points of approved quality confirming to IS-8931.15 mm nominal bore |
| 12 | Providing and fixing Chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints completed as per direction of Engineer in charge.20 mm nominal dia pipes |
| 13 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 14 | Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighting not less than 93 gms each. |
| 15 | Providing and fixing PTMT grating of approved quality and colour. Circular type.100 mm nominal dia |
| 16 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 18 | Distempering with 1st quality acrylic distemper,(ready mixed) having VOC (Voltage Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old work (one or more coats) |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade. Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. |
| 20 | Repairs to plaster of thickness 12 mm to 2 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender