Tender For Provn Of Iron Grill, Railing, Parking Shed And Tiles Incl Certain Sanction Work At Af Stn Bihta.
Tender Value
26.20 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
2 days left
EMD
52400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Iron Grill, Railing, Parking Shed And Tiles Incl Certain Sanction Work At Af Stn Bihta.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Oct-2026 | BoQ | BOQ | 21-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil & spreading in surrounding area n exc 50 m distance complete, all as specified. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in SOFT/LOOSE soil complete, all as specified. |
| 3 | Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified. |
| 4 | PCC type B-1 (1:2:4), using 20 mm graded stone aggregates as in flooring, coping, kerb around tiles & paver block and benching etc slightly rounded or chamfered angles and throating complete all as specified. |
| 5 | PCC type C-2 (1:3:6), using 40 mm graded stone aggregates as in foundation filling & mass concrete, complete all as specified. |
| 6 | Cement concrete, type B-1 (1:2:4), using 20 mm graded stone aggregates as in lintels over 1.5 metre clear span, cills, steps, seismic and other similar band, plinth courses, lacing courses , copings, kneelers, apex stones, bed plates, water troughs and the like complete all as specified. |
| 7 | Cutting holes into or through brick wall / cement concrete column, slab, chajjas etc reinforced or otherwise area exc 100 sqcm but not exc 250 sqcm for fixing holdfast of gate and pack with cement concrete (1:2:4) complete all as specified. |
| 8 | Brick work using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified. |
| 9 | Mild steel rolled sections as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to grade Fe-410-W Gde E-250, quality- A, complete all as specified. |
| 10 | Mild steel rolled sections as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to grade Fe-410-W Gde E-250, quality- A complete all as specified. |
| 11 | Mild steel rolled sections as in doors, grills or gates of angle or other section (hollow section any type, fancy type cast iron ornaments etc) with gusset plates, rails, brace etc complete drilled for fixing of steel sheeting or other covering door to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings ( inclusice of steel sheeting or other covering running rails and guide) and hanging also fastening, confirming to grade Fe-410-W Gde E-250, quality- A complete all as specified. |
| 12 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour having tensile strength of 550 Mpa as in roof coverng/ cladding to wall, fixed with self tapping screws comlete all as specified. |
| 13 | 100 mm thick PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in finished even & rough, as in sub floors, complete all as specified. |
| 14 | 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of shape approved by GE, made by table vibratory method using PU mould, laid in required pattern over and including 50 mm thick compacted bed of coarse sand, compacting through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete. |
| 15 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), complete all as specified. |
| 16 | Two coats of cement base paint on new plastered wall surfaces, including preparation of surfaces, complete all as specified. |
| 17 | Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender